Question about SNK Kinamax WCM-6LNV Webcam

2 Answers

I have followed the instructions by paper, and still would not let me cam on yahoo messenger and amcam says cannot load graph what can i do ?

Posted by on

  • mikeytclasso Feb 05, 2010

    its not the problem i tried it wont work it says cam not connected and when i try to open a program called amcap it says cannot display graph. i tried unstalling my driver, and program, deleted registery, and then reinstall all those things still the same

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 838 Answers

Dear Mikey,

It's for your kind information that sometime the device or sometime the messenger doesn't support the cam devices, Because those are not messenger friendly. As because the driver is different from the hardware provider or inappropriate license of hardware. You might observe that there would be a dialogue box during software/driver installation [such as, Stop Installation , Continue anyway etc.] if you saw any dialogue box during installation, it means the hardware didn't pass the windows certificate. For that reason the driver not able to communicate with Beta type software like Yahoo messenger, Gtalk, MSN Live, Skype etc.

Please confirm and clarify it that your driver/hardware passed compatibility certificate.

For more help please stay connected with us.

Thanks & Good Luck

Posted on Feb 06, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 542 Answers

Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers .
Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.HTML )
set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next "Calling and Devices" on the right, set the Microphone and Speakers to the computer Audio Card or headphones/mike.
Next go to the Test Audio section below where you just setup the microphone & speaker and (written in blue) click on "Open the call setup assistant"
and the "Yahoo Call Setup Assistant" window will open to the left and follow the the instructions. Click on FINISH and the audio will be setup.
Next go to "Webcam" and click in the circle "Allways allow the following people to view my webcam.
Next Click on "Super Webcam" snd in the circle click "Start Super Webcam mode automatically".
Then click OK and it should work.

NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.


Revert back for more assistance. Also provide your valuable feedback/rating on the same.



Posted on Feb 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to down load yahoo messenger


of course.. you need an internet connection that is stable.. go to www.yahoo.com or say google it and find the download from there.. just make sure you are in the yahoo web site.. that's it follow the prompts..
wish you luck//

Sep 09, 2010 | Yahoo Messenger

1 Answer

I couldn't get my cam to work!


Test your webcam here to make sure it broadcasts ok - Hit 'Allow' in the top window and check your cam in the left hand panel.

http://www.testmycam.com/

Having proved your cam is working ,you can configure it to Yahoo Messenger.
COMPATIBILITY WITH YAHOO MESSENGER
Use Internet Explorer to visit this page to check compatibility and automatically download the latest webcam control

http://help.yahoo.com/l/us/yahoo/messenger/messenger10/webcam/mstacamtest.html

CONFIGURE SOFTWARE
Its good practice to disconnect and re-connect your webcam before you start - if you have been using it elsewhere the Yahoo software may have difficulty in locating it. Mine, I just unplug it from the USB and plug it back in, if yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.
Of all the chat programs, Yahoo is the most painful software to set up but if you follow these instructions you should be ok.

INTERNET CONNECTION
Webcam connected
Open messenger - on top toolbar. Left click ( > ) Messenger > Preferences > Connection - Select 'no proxies' or 'connect direct to the internet' depending on the version of messenger you have
make sure your internet connection and country are correct in the lower two boxes > Apply > OK

TESTING
> Messenger > My webcam - the warning panel will launch, click 'OK' and your webcam will start. You should be rewarded at this stage with your happy smiling face.

SET WEBCAM DEFAULT
With webcam still running > Messenger > Preferences > Webcam > Camera Source - set your webcam as default using dropbox. > Camera Settings - adjust settings to suit. > Apply > OK
Take a note of any additional software, if you have multiple choice for Camera Source, you may wish to uninstall any redundant webcam software later to prevent conflicts

PERMISSION OPTIONS
> Messenger > Preferences > Webcam - make your selections ( who you will allow to view you) > Apply > OK

IN USE
When you are both on line and wish to show your webcam > Actions > 'Invite to view my webcam'.
Messenger 10:- > Actions > More Actions > invite to view my webcam. This will launch an invitation on your contacts screen when they 'Accept' your webcam broadcast will start- There can be considerable time lag ( +1 minute) before they see you, so don't be too impatient ( You can check the status on the bottom left of your webcam panel. You can 'drag and drop' the frame to a convenient location by grabbing the top border.

Your contacts may need to configure their connection the same as INTERNET CONNECTION above (Ignoring webcam connected) if they get a "webcam not connected" message

Sometimes you may have to broadcast the 'small image' option from the 'Webcam' menu on the top of your image frames. This happens when one of you is down on resources -its like sending a large photo by email - its quicker if you cut the size down
you can zoom up to 200% from the same menu when the webcam picture comes through

Use the 'Always on top' option from the 'webcam' menu - or your image will disappear when you type a message
AUDIO
Example of a Typical audio set up

Laptop/mic x webcam/mic x Vista x Yahoo Messenger
If you have an earlier OS, you may have to access your hardware from the Control Panel.

TEST SPEAKERS
Right click on speaker icon in System Tray
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click OK
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays
Restart computer
CONFIGURE TO MESSENGER

Open messenger - on top toolbar. Left click ( > ) Messenger > Preferences > Connection - Select 'no proxies' or 'connect direct to the internet' depending on the version of messenger you have
make sure your internet connection and country are correct in the lower two boxes > Apply > OK

Click ( > ) Messenger > Preferences > Calling and Audio
Set mic and speakers to show Default equipment
Run call up assistant to test audio equipment > Apply > OK

If you have a lot of noise generated by feeback - a set of headphones will cut that out - just plug them in to the black socket with the earphone icon alongside

Dec 26, 2009 | Yahoo Messenger

1 Answer

I have a web cam SPC 700NC And i am not getting sound from my headset.


Set up Audio example

Laptop x webcam/mic x Vista x Yahoo Messenger
If you have an earlier OS, you may have to access your hardware from the Control Panel.

TEST SPEAKERS
Right click on speaker icon in System Tray
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click OK
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays
Restart computer
CONFIGURE TO MESSENGER

Open messenger - on top toolbar. Left click ( > ) Messenger > Preferences > Connection - Select 'no proxies' or 'connect direct to the internet' depending on the version of messenger you have
make sure your internet connection and country are correct in the lower two boxes > Apply > OK

Click ( > ) Messenger > Preferences > Calling and Audio
Set mic and speakers to show Default equipment
Run call up assistant to test audio equipment > Apply > OK

Dec 13, 2009 | Philips SPC700NC Webcam

1 Answer

The VX-5000 lifecam mic does not appear to operate on my PC. I use a Dell Optiplex 320 w/XP and all latest updates.


Typical audio set-up

Laptop x webcam/mic x Vista x Yahoo Messenger
If you have an earlier OS, you may have to access your hardware from the Control Panel.

TEST SPEAKERS
Right click on speaker icon in System Tray
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click OK
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays
Restart computer
CONFIGURE TO MESSENGER

Open messenger - on top toolbar. Left click ( > ) Messenger > Preferences > Connection - Select 'no proxies' or 'connect direct to the internet' depending on the version of messenger you have
make sure your internet connection and country are correct in the lower two boxes > Apply > OK

Click ( > ) Messenger > Preferences > Calling and Audio
Set mic and speakers to show Default equipment
Run call up assistant to test audio equipment > Apply > OK

Nov 06, 2009 | Microsoft Life Cam Vx-5000 Webcam

2 Answers

My microphone not working in yahoo.


remove from control panel and re-install yahoo messenger again use 8.1 version.

Aug 21, 2009 | Yahoo Messenger

1 Answer

Not getting a picture on the cam when sent to Yahoo Messenger


Normal 0 Also send this to your family and friends so they have their computer setup properly.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.


Yahoo Setup:

After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
Hope this helps. Bud





Apr 02, 2009 | Logitech QuickCam Pro 9000 Web Cam

1 Answer

My web cam no longer works


hello, what you can do is to reinstall your wed cam so it can work with the newer version of yahoo messenger. so insert the programming CD and follow the instructions.

Dec 05, 2008 | Yahoo Messenger

1 Answer

Lifecam from tbrook2@yahoo.com


Tbrook2,

The following is the link for the latest drivers for the logitech cam
http://www.logitech.com/index.cfm/435/4224&cl=us,en

Otherwise the directions are the same.
When you click on the above link just select you Operating system and that will take you to the most current drivers for this cam.

then install Yahoo messenger 9 and try you cam again.

If you still have problems let me know.
Thanks
Dave

Nov 26, 2008 | Microsoft LifeCam VX-6000 Webcam

1 Answer

A4tech web cam


Got a solution... you have to close and exit the A4tech (AMCAP) screen. Then start the yahoo webcam by clicking the "My Webcam" on the yahoo messenger. At this time, you should be able to see yourself at yahoo webcam.

Hope this helps.

Oct 10, 2008 | A4tech PK5

1 Answer

Veo Stingray 330v still doesn't work after downloading the driver package.


www.gyshuma.com/drive/VEO532.rar

I downloaded the above file. I do not assure its security. It seems fine so far. When extracting it gave me an error, but opened video in yahoo messenger, and on its own named Amcam. My computer still doesn't list me having the driver for this cam. I don't worry about that since it works. This cam is junk. Next time I'm looking for reviews/ratings for webcams.

Sep 28, 2008 | Veo Stingray

Not finding what you are looking for?
SNK Kinamax WCM-6LNV Webcam Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top SNK Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a SNK Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...