Question about Casio FX-260 Calculator

Press shift and eng(to enter engineering mode) and you will find your answer inside.

Posted on Feb 29, 2008

Use the >Frac and >Dec commands in the MATH menu. Press the MATH button to bring up the menu.

Sep 07, 2011 | Texas Instruments TI-84 Plus Calculator

It's not a single button. Press MATH to bring up the math menu, then press 1 to select the >Frac command.

Not all numbers can be converted to a fraction, for example if the denominator is more than three digits.

Not all numbers can be converted to a fraction, for example if the denominator is more than three digits.

Mar 23, 2011 | Texas Instruments TI-83 Plus Calculator

There isn't one. You can convert some values to fractional form by using the >Frac command on the Math menu available by pressing the MATH key. You can enter a fraction as a quotient, but the calculator deals with the number internally by converting it to decimal form.

For example, to see one-half plus one-third, press

( 1 / 2 ) + ( 1 / 3 ) MATH 1 ENTER

For example, to see one-half plus one-third, press

( 1 / 2 ) + ( 1 / 3 ) MATH 1 ENTER

Nov 05, 2010 | Texas Instruments TI-84 Plus Calculator

There isn't one. If you want to convert a value from decimal to fraction, use the >Frac function (press MATH 1). If you want to enter a fraction, simply enter the numerator, divide, then the denominator.

For example, to calculate 1/4 + 1/3, press

( 1 / 4 ) + ( 1 / 3 ) MATH 1 ENTER

and you'll see 7/12.

For example, to calculate 1/4 + 1/3, press

( 1 / 4 ) + ( 1 / 3 ) MATH 1 ENTER

and you'll see 7/12.

Oct 21, 2010 | Texas Instruments TI-84 Plus Silver...

you can use feets and inches to to inter convert these quantities .
following is the procedure to inter convert them :
1. First convert inches to centimeter by pressing buttons in following order shift>conv>o1 .
2. Then convert centimeter to meter by dividing by 10 .
3.now convert meter to feet by pressing buttons in following order
shift>conv>04

1. First convert feets to meter by pressing buttons in following order shift>conv>03. 2. Then convert meter to centimeter by multiplying by 10 . 3.now convert centimeter to inches by pressing buttons in following order shift>conv>02

1. First convert feets to meter by pressing buttons in following order shift>conv>03. 2. Then convert meter to centimeter by multiplying by 10 . 3.now convert centimeter to inches by pressing buttons in following order shift>conv>02

Jun 17, 2010 | Casio FX-300MS Calculator

- Enter a numerator
- Press [/] for division
- Enter the denomoinator
- Press [MATH]
- Press [1:|=>Frac]
- Press [ENTER]

To convert a fraction into a decimal number Press [Math][2:|=>Dec].

Jan 27, 2010 | Texas Instruments TI-84 Plus Calculator

A fraction is in fact a ratio of two number: a division of a numerator by a denominator. The key used for the division operation is the one above the multiplication sign and below the caret [^], and in thee rightmost column of keys.

Beware that this calculator converts any ratio of two numbers into a decimal value. To keep a fraction in a fraction form you must use the [|=>Frac] or [ToFrac] command. To convert a decimal result to a fraction, use the [|=>Dec] command.

These commands are accessible through the CATALOG or more easily by pressing [MATH] (under the ALPHA key) and selecting [1:|=>Frac], or [2:|=>Dec]

Ex: to keep 27/48 in fraction form you enter

27 [/] 48 [MATH][1:|=>Frac] [ENTER]. Result is 9/16

You will notice that the resulting fraction is reduced to its simplest form.

To convert the above result from fraction to decimal press [MATH][2:|=>Dec]

A fraction can always be approximated by a decimal value but the converse is not always possible.

Beware that this calculator converts any ratio of two numbers into a decimal value. To keep a fraction in a fraction form you must use the [|=>Frac] or [ToFrac] command. To convert a decimal result to a fraction, use the [|=>Dec] command.

These commands are accessible through the CATALOG or more easily by pressing [MATH] (under the ALPHA key) and selecting [1:|=>Frac], or [2:|=>Dec]

Ex: to keep 27/48 in fraction form you enter

27 [/] 48 [MATH][1:|=>Frac] [ENTER]. Result is 9/16

You will notice that the resulting fraction is reduced to its simplest form.

To convert the above result from fraction to decimal press [MATH][2:|=>Dec]

A fraction can always be approximated by a decimal value but the converse is not always possible.

Jan 23, 2010 | Texas Instruments TI-84 Plus Calculator

Hello,

Yes it can do fractions although it does not have a specific key.

If you want to enter a fraction and keep it in fraction form, though reduced to its simplest expression use [MATH][1:->Frac] [ENTER]

Exemple:

27/48 [MATH][1:->Frac][ENTER] displays the reduced form 9/16.

To convert a decimal number into a fraction (with the inherent loss of precision) press [MAT][1:->Frac][ENTER]

Use [MAT][2:->Dec] to convert to decimal, but this is done by default.

Hope it helps.

Yes it can do fractions although it does not have a specific key.

If you want to enter a fraction and keep it in fraction form, though reduced to its simplest expression use [MATH][1:->Frac] [ENTER]

Exemple:

27/48 [MATH][1:->Frac][ENTER] displays the reduced form 9/16.

To convert a decimal number into a fraction (with the inherent loss of precision) press [MAT][1:->Frac][ENTER]

Use [MAT][2:->Dec] to convert to decimal, but this is done by default.

Hope it helps.

Oct 05, 2009 | Texas Instruments TI-84 Plus Calculator

Hello,

There is no fraction button. Any division of two integers you do is represented as a decimal number. If you want your fraction to remain a fraction you enter it as follows

**7[ / ] 19 [ MATH][1:ToFrac] [=] displays 7/19**

If you want to convert a decimal number into a proper fraction press**[MATH][1:ToFrac] .**

Exemple 7/19 [ENTER] gives .36842105. If without doing anything else, you press [MATH][1:ToFrac] you recover 7/19.

There are limitations related to the number of decimal digits in the floating point number.

.3684 [MATH][1:ToFrac][=] gives 921/2500 but

.36842 [MATH][1:ToFrac][=] gives .36842 : it is not converted to fraction.

Hope it helps

There is no fraction button. Any division of two integers you do is represented as a decimal number. If you want your fraction to remain a fraction you enter it as follows

If you want to convert a decimal number into a proper fraction press

Exemple 7/19 [ENTER] gives .36842105. If without doing anything else, you press [MATH][1:ToFrac] you recover 7/19.

There are limitations related to the number of decimal digits in the floating point number.

.3684 [MATH][1:ToFrac][=] gives 921/2500 but

.36842 [MATH][1:ToFrac][=] gives .36842 : it is not converted to fraction.

Hope it helps

Sep 16, 2009 | Texas Instruments TI-83 Plus Calculator

type the decimal you want to convert then press math button scroll down to were it says frac which means fraction then press enter on frac then press enter again to solve and to change it to a decimal type the fraction and press dec instead

Aug 23, 2009 | Texas Instruments TI-30XA Calculator

Feb 18, 2014 | Casio FX-260 Calculator

124 people viewed this question

Usually answered in minutes!

5'*7'

×