Question about Computers & Internet

1 Answer

I have a LG CD-R?RW Drive CED-8080B/CED-8083B that has outdated software and reads burn process failed (power calibration error). I,m a beginner - don't know what this means. Need new drive? Update something? Thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 130 Answers

Sounds like you need to either update the firmware on the drive, or the drive is malfunctioning physically.

I'd just buy a new drive. Those things are very cheap now a days. Don't waste your time trying to fix it unless you can find an easy fix.

Posted on Feb 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need driver or installation software for lg cdrw ced8083b


Hi, Thanks for using fixya.

You need a copy of Nero 8 or 10 9 doesn't work so good. Nero should have come with the drive if you got it new.
Hope this helps:

Terry


If you have any further questions regarding this matter feel free to post a comment or if you are satisfied with my answer, please give it a rating for this is the reason I do this work.

Feb 23, 2011 | LG CED 8083B CD-RW Burner

2 Answers

Slave Jumper Position


ok......it is easy to do such, just place the jumper on the first : and enter the system setup them test if it is on slave if not repeat the same for all the ::::: untill you get the slave and cable select.

Sep 08, 2009 | LG (CED-8080B) CD-RW Burner

1 Answer

New CD R/RW drive will not let XP Boot


hi,
on the back of the new drive usually is a set of tiny pin jumpers, and a diagram for it on the drive, you might have to switch the pin jumper to "cs" cable select or "slave" usually master is for the hard drive. If that didnt do it then while the computer is booting hit f-8 or maybe f-9 and get into your bios area, search for boot sequence and study the area in there and see if your drives listed, try and change the config there so your hard drive(c) boots first, then usually your new drive. hopefully one of those ideas gets ya going, good luck
J

Jul 21, 2009 | LG CED 8083B CD-RW Burner

1 Answer

All of a sudden my computer lost contact with CD and DVD it sees them but will not load drivers. this is on a LG CD RW CED - 8083B and a Compac DVD - 115.


Go to start and right click on My computer then properties/device manager. Go to DVD/CD ROM and right click and select uninstall.
Reboot your system and windows will locate it and reinstall it.
Do this one drive at a time.

Mar 15, 2009 | LG CED 8083B CD-RW Burner

2 Answers

LG CD-RW CED-8080B drivers


You may download the drivers from this site

Regards

Mar 15, 2009 | Computers & Internet

1 Answer

LG CD-RW CED-8120B will not read dvds


I have a LG CED 8120B in my computer right now. The reason you cannot read DVD's is because it is a CD player/burner, and not DVD.

Mar 01, 2009 | LG CED 8120B CD-RW Burner

1 Answer

JUMPER SETTINGS


The settings are pretty much universal, This comes from memory:

there are 6 pins
s m c
. . .
l
. . .

So you connect the first 2 pins. shown as .l.
If my memory is incorrect then try the middle one
if that doesnt work try the last possible combo.

trial and error my friend :) You can do it.

Feb 13, 2008 | LG CED 8083B CD-RW Burner

1 Answer

CD Burner stops in middle of burning


Hi KayGo, People hate going over the basics but gotta ask: -Have you tried cleaning your read/write heads using a commercial cleaner? -Do you have any problems reading CDs? -What Brand of CDs are you using? If you're using the cheapies you should try a few quality brands such as HP or Fugi. -Have you checked the drives manufacturers specifications for blank disks? -What recording speed are you using? Try setting it lower and see if that has any effect. -How much reading and writing have you done with this drive? They do wear out and CD only R/W drives have a history of not lasting long. -Have you tried running a diagnostic on your drive? Here is a link to the Sony CD/DVD diagnostic tool. Meant for Sony drives but I have used this successfully on other drives - http://sony.storagesupport.com/cdrw/diagnostics.htm#dwn Let us know if you need any other assistance and don't forget to rate the posting.

Jan 03, 2007 | LG CED 8120B CD-RW Burner

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...