Question about NordicTrack Exercise & Fitness

1 Answer

Belt slipping on Nordic Track c1900

My Nordic Track c1900 is slipping while walking and jogging.

Posted by on

  • Anonymous Mar 11, 2014

    Ilike dowloading drivers for this moterboard.
    Thank you very much.

  • Anonymous Mar 12, 2014

    I lost the manual and i need a new wristband for it too

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My belt is slipping I tighten both alan head screws to the max roughly 7 turns and still have the broblem

Posted on Jul 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stopped in Belt had been slipping smelled hot but motor was barely warm. Was 30 minutes into workout and machine stopped. Electric panel works but motor won't run.tilt works


time to lube the DECK belt, use WD-40 or grease. do it by each weeks. Try to loose the deck belt. in the way that you lift the belt by 2" with your finger. Otherwise, you must replace the belt+deck. See if the belt drive is to tight. And take time for maintenance the motor, replace the carbon brush+and lube the bearing.

Feb 08, 2015 | Nordic Track Nordictrack C1900 Treadmill...

1 Answer

How to adjust belt?


If you are adjusting the walking belt that much (7 complete turns) it sounds like the drive belt the small rubber belt from the motor to the front roller is really loose. You should only have to adjust the walking belt 2-3 turns max... you do not want to prematurely stretch your walking belt!

May 14, 2014 | Nordic Track Exercise & Fitness

1 Answer

Walking belt on NordicTrack C1900 is to loose, how do I tighten it? When walking on it when u get to level 4 it just about throws u


Tighten the rear roller bolts evenly with the unit off. The correct tension is when you firmly lift up on the right and left edges in the middle of the walking belt and get 2-3 inches gap above the walking board. If one side is looser than the other, the walking belt may wander sideways. Turn the rear roller screw on the side that it shifted to in a clockwise manner(1/2 turn at a time). Test on a low speed and adjust as needed. (you may manually recenter the walking belt with your foot if it shifted too far to one side and is rubbing on the plastic edges.) You likely have a worn motor belt that needs changing or even a pulley on the front roller that is slipping and needs replacing. They all cause slippage.

Sep 30, 2010 | Nordic Track NordicTrack Treadmill, A2550

1 Answer

The walking belt is slipping and drive belt shifted to the center of treadmill


You will need to replace the drive belt inside the motor cover. and also tighten the rear roller bolts to tighten the walk belt

Aug 12, 2010 | Nordic Track Exercise & Fitness

1 Answer

My nordic track treadmill's walking belt stops when I start walking on it but the motor is still running although the front roller is not moving when I start walking on the walking belt. Do you think the...


Unplug the unit remove the motor shroud inspect the drive belt if the rubber feel slick then my recommendation is to replace the drive belt. Adjusting the drive belt may take care of the problem if you do not need to adjust it too tight. If you choose to do the adjusting and feel you have adjusted the running belt thinking it would resolve the slipping, then back the tension down until it the running belt is slipping then adjust until the slippage is resolved.

May 17, 2010 | Nordic Track Exercise & Fitness

4 Answers

Our belt is slipping on our nordic track c1900 treadmill, how do i fix it?


I have the same unit. First, remove the hood. Then, the motor has an adjustment screw on the belt side of the motor. Loosen the nut a little, adjust the motor up or down to make the belt as tight as you can by hand, then re-tighten the nut. This always fixes mine.

Sep 17, 2009 | Nordic Track NordicTrack Treadmill, A2550

Not finding what you are looking for?
Exercise & Fitness Logo

Related Topics:

1,291 people viewed this question

Ask a Question

Usually answered in minutes!

Top NordicTrack Exercise & Fitness Experts

Howard
Howard

Level 2 Expert

115 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

128 Answers

Are you a NordicTrack Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...