Question about Canon Photography

Open Question

Unable to work with ImageMixer 3SE ex Canon

CONCERN:
ImageMixer 3SE ex Canon (bundled with Canon HF200 videocam)
> PC-system:
HP Compaq dx 2450 Microtower
Processor: AMD Athlon Dual Core 5200B, 2.7GHz
RAM 4 GB
Windows Vista business, 32 Bit

> installed:
ImageMixer 3SE, version 3.4.0

- I can start ImageMixer
- I can load down videofilmer from Canon HF200 videocamera
- I see a lot of files but... I can´t open them!
the computer works under full last but it seems to never end!
couldn't open a file...even though there are many files in a long list

I tried to update to ImageMixer version 3.1.3 but the downloader:
http://www.pixela.co.jp/oem/canon/e/imagemixer3_se_canon/swe_download.html
suggest at there is no ImageMixar installed!

What can I do??

Thanks in advance

István

p.s. any other program to recommand to try?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 77 Answers

SOURCE: wireless driver problem

I am currently using Linux on a Compaq C500 with a Broadcom wireless adapter. Sounds like your wireless adapter is on of the ones that uses the b43 module like mine.

Aside from using the correct module, you also need a firmware image. Instructions can be found at: http://linuxwireless.org/en/users/Drivers/b43

Hope this helps and good luck with Linux! Once you fully switch to Linux you'll never go back to crappy M$ products!

Posted on May 09, 2008

Joed911
  • 4338 Answers

SOURCE: The HP Presario A900 shuts down within 5 minutes of start up

If your laptop is overheating, it means that the Processor fan is not working. You can damage it further if you keep trying to us it. Although I must say, this is the first time I've heard of using frozen veggies to cool it down. I have a client that bought a portable Air conditioner to cool his laptop. I fixed it by replacing the fan.

The fact that the unit works while being cooled externally points directly to the fan.
Is the unit out of warranty?
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Posted on Nov 26, 2008

  • 2 Answers

SOURCE: raw file conversion stopped due to disk is full

Make sure, that the disc is not locked. If this does not work try dregging the files to your desktop, then convert them.

Posted on May 11, 2009

ihavsolution
  • 152 Answers

SOURCE: no sound using image mixer3 se v5

http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NAME=KV-85&fMTYPE=Socket%20754&pPRODINFO=Driver

from here try to download audio driver...

Posted on May 27, 2009

  • 102366 Answers

SOURCE: Digital Photo Keychain--Can't Find Pictures within photo viewer's file manager to load

That's the folder for the Windows Photo Gallery program. Your own photos will be in "My Pictures", "Pictures", or wherever your photo software put them.

Posted on Feb 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I download the software for ImageMixer 3SE? I have misplaced the disc for this software and need it for my Cannon camera Vixia HFR100


You can download some software for the Vixia HF R100 here: https://www.usa.canon.com/internet/portal/us/home/support/details/camcorders/support-high-definition-camcorders/vixia-hf-r100 . However, ImageMixer 3 SE is third-party software that is only available on the driver disc that came with the camera. Some companies will send you a replacement disc for a small fee. You'll need to contact Canon support, https://www.usa.canon.com/internet/portal/us/home/support/ , to ask if they have discs available.

ImageMixer 3 SE is available here: http://www.pixela.co.jp/oem/canon/e/imagemixer3_se_canon/ . However, this is only for updating the software on a computer that already has the program installed.

I hope this helps.

Cindy Wells

Apr 09, 2016 | Cannon Video Cameras

1 Answer

I can't find an imagemixer se3 manual.


When you are typing in the serial number, ignore the last two letters. Type only the digits.

Apr 26, 2010 | Canon Computers & Internet

1 Answer

Install. ImageMix. (Canon HF-10), not accepting the serial number


I found another serial number under the batteri, and then it worked out fine.

Jul 30, 2009 | Canon FS100 Flash Media Camcorder

3 Answers

Serial numbre installing ImageMixer for Canon HF-10


I have a problem with my cannon fs100, I am looking for the serial number and it's not any where near, under or over the battery. Please help?

Jul 14, 2009 | Canon FS100 Flash Media Camcorder

1 Answer

Need a certification code


The serial number is 12 digits on my Canon FS300A. There is a "YC" after the 12 digits, and it would not activate until I removed the two characters. Hope this helps.

Mar 29, 2009 | Video Cameras

7 Answers

Problem installing ImageMixer 3 software on my Mac.


I just got off the phone with Canon support. I have a Canon HF 100 and was experiencing the same problems. If you have the newest version of iMovie (in iMovie '08....but I would bet '09 would work fine as well...'06 is questionable), you shouldn't have any trouble getting the files off your camera onto your Mac.

Steps:

1. Plug in the camera and turn the power on (or plug in the memory card via a card reader)
2. Open iMovie
3. Wait a few seconds to see if your camera connection automatically opens, if it doesn't, click on the image of the camera on the far left side of the middle bar in iMovie.
4. It should recognize the video information you have plugged in at this point. If it doesn't, in the bottom of the import window, see if you can select a camera from the drop down list next to where it says "camera" in the bottom left.

I was told by the tech support people that I need to update my Final Cut Express software in order to read the video files, however I think they're wrong because I'm pretty sure I have the newest version. I also just found this information on Apple's website useful (see the video entitled "Built in AVCHD"): http://www.apple.com/finalcutexpress/ If you're using Final Cut Express 4, go to File -> Log & Transfer (or hit SHIFT + COMMAND + 8 on your keyboard) and if your camera/memory stick is plugged in, it should show a list of your files right there. Much better than iMovie.

Here is some information on the stuff I am using if it's useful:

iMovie '08 version 7.1.4
Final Cut Express 4 version 4.0.1
Canon HF 100 Digital HD Camcorder
Mac OS X Leopard Version 10.5.6

Hope this is helpful. I doubt that I will check back to this forum, so please email any questions you might have (I may or may not be able to answer) to bbaumgar@ucsd.edu. I would recommend, assuming you have a Mac, going out and buying iMovie '09 ($39 - $79 depending where you buy it), Final Cut Express ($100 - $300 depending where you buy it), or Final Cut Studio 2 ($400 - $1200 depending where you buy it) before spending money on another software that won't let you do as much. The Imagemixer 3 software that your camera came with is supposed to let you basically do the same things, but doesn't work on Mac. It looks like you can buy the Mac version from Pixela...but I would encourage you to contact Canon or Pixela support first and demand a free one, since you paid so much for the camcorder and should be entitled to the software.

Canon tech support was pretty useful as well: 1-800-828-4040. I only had to wait about 5 minutes. (The total call was around 15 mins).

Good luck.

-Brian

Feb 12, 2008 | Panasonic Palmcorder SDR-H18 Camcorder

Not finding what you are looking for?
Photography Logo

Related Topics:

444 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Photography Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1923 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Canon Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...