Question about HP LaserJet P3005n Printer
Printer will not print. keeps saying "mem test failure replace dimm 1. Alsobuttons on top do not respond when pushed.
The cover on the right side will slide to the rear. Take it off. You will see a metal door. Power is off at this time!
Grab the door at the left and pull it open. You'll see a memory DIMM. Pull the little silver clips on either side of the DIMM out. The Dimm should release. Take it out. Power up the printer. If you don't get the error, power off. Reinsert DIMM. Power on. If no error, you've fixed it. If error comes back, you need a new DIMM. You should be able to print with out the memory, only slower.
Posted on Feb 09, 2010
First you pl. check the dimm/sdram module is seated properly in its place otherwise insert new one
Posted on Feb 06, 2010
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jun 29, 2011 | HP LaserJet P3005dn Printer
Feb 03, 2011 | HP LaserJet 2420dn Printer
Jun 02, 2010 | HP LaserJet P3005n Printer
Sep 24, 2009 | Office Equipment & Supplies
Sep 10, 2009 | HP LaserJet P3005 Printer
498 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: