Question about Magellan RoadMate 2200T GPS Receiver

1 Answer

Wont turn on?

It was working great and no it won't turn on

Posted by on

  • laShaughn20 Feb 22, 2008

    I don't know what happened it was working find and now it want come on. I think it might be the fuse but I can't find a store the carries the fuse

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

I answered this on another thread, I removed the back cover, 6 screws, and pulled the battery connector from the board, waited a minute or two, then reconnected. another poster said also that the connector for the power may have gotten loose, you can tighten that also but be careful. I did not have to do this, only the battery. Do NOT do this with a power cord plugged in, to be safe.

Posted on May 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My navman won't find my location


You may have to go to the menu and turn on the your location option. If it wont find your house it might be because you are on a private road or the manufactures didn't update their info

Aug 14, 2012 | Navman F15

1 Answer

My Simrad GPS/sounder won't turn on.


assuming you have checked fuses etc you may have to use it as a lunch hook for your dingy...seriuosly..don't know ow old t is but a replacement is order methinks ...just like laptops they have improved greatly now and features abound screens are bigger and better...price has also dropped?

May 27, 2012 | Simrad GPS Devices

1 Answer

My garmin nuvi 250w wont turn on


Try this: Slide and HOLD the power switch into the ON position for 10 seconds or until it turns on - which ever happens first. This forces a reset / reboot of the GPS. It does NOT delete any data.

If that doesn't work, the battery may be discharged. Recharge by connecting to your computer's USB port with a USB cable, or with the AC adapter (if yours came with one) for 8 hours. Do not use your car's cigar lighter or power point to do this (it won't work). Turn on as normal or failing that, use the slide & hold method detailed above. After starting up with the slide & hold method successfully, subsequent power up operation can be done in the normal manner. You can use the slide & hold method any time the GPS fails to start up normally.

One power up method or the other should allow the GPS to start if the battery still has a useful life. If it does not power up, it is likely that the battery is no longer capable of holding a charge. In this case, you may purchase a battery and attempt to replace it yourself (this is a fairly involved process), or you can contact Garmin Tech Support to arrange for a flat-rate repair.

I hope this helps & good luck!

Feb 28, 2012 | Garmin nuvi 250W GPS Receiver

1 Answer

My Navigon 2100 GPS lights like it's charging, but it won't turn on


I HAVE A 2100 NAVIGON GPS SCREEN WONT COME ON TRYED CHARGEING IT THE ORANGE LITE COMES ON /WONT CHANGE TO GREEN ALSO TRYED TO RESET NOTHING DO YOU HAVE ANY IDEAS WHAT ISHOULD DO NEXT .

Jun 30, 2011 | Navigon 2100 Max Portable GPS System

1 Answer

Mytomtom wont cut on


Won't turn on ?
Possible causes are dead battery, recharge. Takes up to three hours from dead.

Jun 28, 2011 | Tomtom ONE GPS Receiver

1 Answer

My little buddy won't turn on, it's charged, plugged into computer. green light won't come on at all. I held the power button on for 10 -15 sec with no response.


I have 2 of these devices. Try using a cellular phone charger with the same plug at the end and plug it in. I have waited 5-10 minutes after doing this and they have come back to life and turn on. Maybe it will work for you.
Lewis

May 14, 2011 | Insignia GPS Devices

1 Answer

The lock sign is stuck on the screen of our explorer 1 and the navigation feature wont work. radio shack said it needed a seperate card to operate. is this true or is there something else?


After resetting the unit 30-30 (Press the Reset button with the Power on for 30 seconds and keeping the button pressed Turn the Power OFF for 30 seconds) with the mapping SD card out of the system, it should then take the information from the SD card correctly. Recommend using updateable iGO or AMIGO program in the unit.. Works Great..

Jun 30, 2009 | Digi MAXX tal Media Explorer I Car GPS...

2 Answers

Fritzed Unit when antenna up


I have a similar problem but I can't turn the GPS off at all, even when the antenna is down. As far as the power on/off cycle, I found another link on this site that said to turn off WAAS while the GPS is off then when you turn it on the unit will not power cycle continuously. You loose the WAAS feature but the GPS and unit still works.

Jan 24, 2008 | Garmin iQue 3600 GPS Receiver

Not finding what you are looking for?
Magellan RoadMate 2200T GPS Receiver Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magellan GPS Devices Experts

Roni Bartlett
Roni Bartlett

Level 1 Expert

31 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

szanghi

Level 2 Expert

76 Answers

Are you a Magellan GPS Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...