Question about Boss BV7HR 7 in. Car Monitor

2 Answers

Monitor do you know if there is something like a rca cord that comes out of the back of this monitor? Thomas

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

It comes with a proprietary cable that plugs into the back of it (it looks similar to SVIDEO although it's not). On the other end of the cable is two video inputs and 2 pairs of left & right audio inputs (all female RCA). On the front is another proprietary jack (looks like an earphone jack but it's not) with a supplied cable that splits it into 3 female RCA jacks (1 video and L & R audio). So there's a total of three standard inputs you can switch from. You do need to provide your own Male-Male RCA cables in between video sources and the monitor - you can get them at wal-mart for a couple of bucks. If you don't have those two proprietary cables it might be hard but I suppose you could make your own if you could get the pinouts. Probably the front one would be easiest to reverse engineer since it only has three wires in it.

Posted on Feb 19, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 216 Answers

You need Male RCA plug.

atdlee@netzero.com

Posted on Feb 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mmy daughter gave me this camera when she bought new vehicle with back up camera.I donthaveinstallationbookorinstructionscanigetthisinfooncomputertoprintout


yes you can find generic info on this. most all the systems, no matter name brand, have the same basic installation.

you will need a 12 volt power source for the monitor. the camera power will come from the reverse lights power source(tap into the power at the reverse light), then you will need to run an rca style cable from the camera mounted position to the monitor itself.
so every time you put vehicle in reverse the camera comes on.
or you can wire the camera and the monitor through a switch and it will come on anytime the switch is turned on. but if you do this, the switch need to be wired to a ignition controlled power source.

Jun 01, 2015 | PEAK Back-Up Camera with 2.4 LCD Monitor -...

1 Answer

Flip down monitor how to wire it


The proper connection for these wires are: the red and black on the RCA cable go to chassis ground and a switched 12volt wire (accessory or ignition) and should be fused at the connection with not more than a 15 amp fuse.
No info on the dome light wire connections

Jun 27, 2012 | Car Audio & Video

1 Answer

Xo vision gx2022..need the plug that turns video wire into rca's


radio shack online or crutchfield.com may have what you need

Dec 27, 2009 | XO Vision GX2022 Car Monitor

3 Answers

My kenwood kvt 514 is in protect mode


It sounds like your amp is not grounded properly and is tryin to use your radio as a ground through the RCA's or there is a bad channel (dead short) in the amp.

Jun 02, 2009 | Car Audio & Video

1 Answer

Need video jack


I interfaced the SAVV LM-S6001 today. Here's what I found;

Looking straight on at the male 8 pin DIN connector here's how I'll describe it. There are 3 pins across the top row. From left to right I'll call them 8, 7, 6. There are 2 pins on the left side of the middle row, 5 leftmost and 4 adjacent to the center. Moving right, there is a gap and then pin 3 on the rightmost side of the middle row. There are two pins on the bottom row, pin 2 on left and pin 1 on right. Draw that on some paper.

8 7 6
o o o
5 o o o 3
o o
2 1

Pin 1 is +12VDC
Pin 2 is center contact of both audio and video RCA jacks
Pin 3 is -12VDC
Pin 4 is outer RCA contact for Video
Pin 5 -n/c
Pin 6 -n/c
Pin 7 -n/c
Pin 8 is outer RCA contact for Audio

Now, I don't know what pin 7 does, but it is wired next to pin 4 suggesting a video application, Svideo is my best guess. I can only test for a composite video connection that I am using.

It's alive!

Jul 09, 2008 | Savv LM-S6001 Car Monitor

1 Answer

Audiobahn AVM270Q (white out)


You have to check if Video cable from Flip Down Monitor has RCA Plug Cable or Super VHS Plug Cable.

RCA Plug is Yellow for Video= connected to Yellow Input of radio maybe loose.

Get VCR or Video Camera and connect Video Output with cable to Yellow RCA Plug of Flip Down Monitor.

Turn car on and VCR/Video Camera: you should get video to FL Monitor.

If not, then FLM is defective or has adjustment problems..

atdlee@netzero.com

Mar 07, 2008 | AudioBahn AVM270Q 7in Widescreen Car...

1 Answer

Sound


The thing should have come with a cable that leads to a bunch of RCA cables. Two of those cables are supposed to be connected into your car stereo and then it should work properly.

Feb 16, 2008 | XO Vision GX2146 Car Monitor

Not finding what you are looking for?
Boss BV7HR 7 in. Car Monitor Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Boss Car Audio & Video Experts

yadayada
yadayada

Level 3 Expert

63456 Answers

xxxxxx xxx

Level 3 Expert

4724 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Are you a Boss Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...