Question about Life Fitness LifeFitness 97Te Treadmill
My treadmill is making an extremely loud high pitch sound near the back of the unit. The belt is my guess but I don't know what to do. It gets louder and higher in pitch when I raise the speed. I think the belt may just need an adjustment but I have no idea how to go about it.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Could be a number of reasons - where is the black dust coming from? remove the motor hood and check for misalignment of the drive belt from motor to the front roller.
Posted on Apr 27, 2010
Unplug unit then remove motor shroud then plug unit in then start treadmill your going to use a flat tip screw driver as a stethoscope. Now place the flat on the motor at edge close to the flywheel put your on the handle your ear and you should be able hear if the loud noise form the bearing if not, then repeat procedure on the other end by the fan if the noise is pin pointed on the motor then replace motor, if not originating from the motor the proceed to the front roller.
Use a flash light and observe and locate the font roller shaft so that you can comfortably rest the tip without it slipping on either end of roller.
As before repeat the procedure that was performed on the motor if noise originated their then replace roller if not proceed to rear roller.
Use you flash light and look the adjusting bolts where the end caps are the proceed to insert the screw driver and make contact with the tension bolts listen to each side.
You should locate noise with this procedure take your time and be careful
Posted on May 17, 2010
No do not use, until YOU LUBE. This happen because you must do it every 5 hours aprox of use, The machine protect itself the electronic system and shut down.Maybe the deck belt is worn.
2) LUBE the rollers bearing very i
3) test the drive belt, and test too the bearint of main motor and fix it.
God bless you
Posted on Nov 19, 2012
Tips for a great answer:
Aug 09, 2016 | Treadmill Doctor Proform 5.5 Crosstrainer...
Dec 25, 2015 | Goes Motorcycles
Jan 15, 2015 | LG Dryers
Mar 24, 2014 | 1999 Chrysler Cirrus
Sep 28, 2013 | Cars & Trucks
Nov 08, 2011 | Hyundai Motor 2002 Sonata
Jun 18, 2011 | Whirlpool LER7646E Dryer
Nov 07, 2009 | RCA HD52W59 HDTV Projection Television
Apr 12, 2009 | Dryers
Oct 17, 2007 | Frigidaire GLER642A Electric Dryer
639 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: