Question about Bosch Logixx WFT 2806 Front Load Washer/Dryer

1 Answer

We have had Bosch Washing machines for ever, and the time came to buy a new one, so the a Logixx8 1600 Express was purchased. However to use this like any previous one is impossible as the spin cycle demands you have so little in and balanced that you end up having to remove items wring out start again or reduce to say one sweatshirt or one bidet mat it is impossible to guess whether it will spin at the end of the cycle. Having called the service line they state that you must not overload it. we are not! however if they deem to say no fault found when an engineer comes out they will charge ! What have I bought? Surely the machine cannot be so sensitive or fickle my wife is pulling her hair out like me this is not good enough. Please do not tell me to weigh everything before hand as I have tried this but of course it depends on the absorbent type of washing we are doing. What do you suggest? Is there something wrong with the sensitivity or is it a machine not designed for normal washing. How can we resolve? Please reply as we are running this eco friendly machine is being used with singular items so that it can cope not good I await your reply

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Bosch Master
  • 3,463 Answers

Todays washers are built with a sensor that detects uneven, out of balance loads.and over loading.
On the other hand it is no good trying to spin a single srticle on its own, as it will detaec out of balance load, and will not spin, there has to be a least 2 or more articles in for it to spin.
Another thing to check is that the washer is perfectly level, back to front and side to side.
Make sure the filter is clean.
Hope this helps.

Posted on Feb 05, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where do i buy a new element for my washing machine

and you are living? milky way galaxy?

give us a chance and at least a country from which you are calling...

Feb 12, 2015 | Bosch Washing Machines

1 Answer

My bosch classixx 1400 express washing machine drain pump sometimes does'ent work

bosch classixx 1400 express washing machine drain pump This video will show you how to change the pump washing machine
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook

Mar 13, 2013 | Bosch Washing Machines

1 Answer

Hello if i purchase a bosch washing machine will

Yes surely. When ever you buy first installation will be done by an authorised company personnel.

Jun 27, 2010 | Washing Machines

1 Answer

Door wont open on bosch classixx 6 1400 express washing machine

The "F16" on a Bosch indicates the door is open / unlocked. If it's happening during a wash it would suggest either a faulty door lock, faulty wiring or worse, a faulty main control board. The wash program should halt when this comes up but you should be able to restart it when the door is closed. As the cost of a new door interlock isn't overly expensive. The best way to fix this problem is to purchase a new lock and fit it.
Thank you !

May 19, 2010 | Bosch Classixx WFL 2066 Front Load Washer

1 Answer


Some of the motors Need A HALF motor which is the end section with brushes fitted, quite expesive if you can get brushes they are around 5 times cheaper if you check a parts website that will tell you which one u need...

Oct 01, 2009 | Bosch Exxcel WFO 2865 Front Load Washer

3 Answers


just go a bosch washing machine exxcel 14 express cant get it to work can anyone help i dont have the user book my email is

Apr 01, 2009 | Bosch Exxcel WFX 145S Front Load Washer

1 Answer

My bosch classixx 6, 1200 express washing machine keeps displayin

Bosch classixx 1200 express washing machine won't drain

Mar 29, 2009 | Bosch Washing Machines

3 Answers

Bosch Classixx 1000 Express washing machine won't fill with water

cheak the filter witch is at the intake and if when it is going to fill does it buzz if dose that means the vale is working if not call a repaire man out hope this helps

Jan 22, 2009 | Bosch Classixx WVF 2402 Front Load...

1 Answer

My Bosch Exxcel 1400S Express (WFX148SGB) just doesn't spin anymore. Everything else seems to work fine?

Bummers. Sounds like the clutch is out. (If you can hear the motor spinning but not the drum, I'd say that's it. Especially if the machine has a number of years on it.)

I once looked into having a service man come fix a clutch. He said it would be cheaper to buy and new washing machine and have the old one hauled away.

Good luck.

Nov 12, 2008 | Bosch Washing Machines

Not finding what you are looking for?
Bosch Logixx WFT 2806 Front Load Washer/Dryer Logo

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3074 Answers


Level 3 Expert

76164 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides