Question about One For All URC-7800 Remote Control
If you have a URC-7800 the codes 0477, 0008, 0017 should work for the scientific atlanta cable box.
Posted on Feb 05, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You can follow the two methods I have explained below:
AUTO SEARCH FOR CODE
To program your remote in Auto Search Mode, first turn on the device you wish to program and point the remote toward it.
Then press and hold the SET and POWER buttons until the LED turns on.
Then press the device key ( CATV or RCVR) .
The LED will flash once.
Then press the CH+ button.
Then hold the POWER button for about two seconds until the LED turns on.
Release the POWER button and the LED will flash slowly. Your remote is searching through all of the codes. Continue to point the remote at the device until your device responds.
If your device turns off, turn it back on and press the CH+ button on your remote. Then press the POWER button and CH+ button alternately until the device turns off and the code is correct. Press the ENTER button to confirm and store the code. The LED will flash three times and then turn off.
If the above is not helpful then try manually searching for code:
First, press the device button on your remote.
Then press and hold the SET button. While holding the SET button, press 1 to find the first digit, 2 to find the second digit or 3 to find the third digit.
The LED flashing time will stand for each code number. If it doesn’t flash, it will stand for zero.
For example, the TV code you are trying to find is 102.
Press the SET button and 1. The LED will flash one time.
Press the SET button and 2. The LED will not flash.
Press the SET button and 3. The LED will flash two times.
Press the ENTER button to confirm and store the code. The LED will flash three times and then turn off.
Hope it helps to find your code. Thank you for using fixya!
Posted on Sep 25, 2009
Tips for a great answer:
May 01, 2016 | Magnavox Televison & Video
Nov 22, 2010 | Cisco Televison & Video
Sep 25, 2009 | One For All URC-7800 Remote Control
Jul 18, 2009 | RCA Universal Remote Control
Mar 21, 2009 | Televison & Video
Dec 21, 2007 | Symphonic ST419E TV
Mar 18, 2007 | Yamakawa DVD-218 DVD Player
Sep 29, 2013 | One For All URC-7800 Remote Control
1,066 people viewed this question
Usually answered in minutes!