Question about Dryers

1 Answer

How to change dryer element on frigidaire galaxy GLER34IAS2

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dryers Master
  • 8,220 Answers

What I do is pop the top with a putty knife.
I can then get to the screws holding the front on. I get the front off and remove the rear hatch. I release the belt and get the drum out. Then I remove the pan from the rear of the dryer.
I get the old element out of the pan and I clean out the fluff. I gently connect the new coil to each standoff being careful not to GAP the coils. Note the coils must be evenly placed or a hot spot will occur and the life of the element will be greatly reduced. Failure to remove lint/fluff from the unit will cause a hot spot also. Nothing to it. I have photos with part numbers and manual HERE

Posted on Feb 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where are fuses located in Frigidaire front loading dryer?


No fuses. Probably Heating element or one of the thermal switches. Electric dryer I am assuming

May 24, 2015 | Frigidaire Dryers

1 Answer

A step by step video on who to find and change a heating element on a frigidaire crown dryer


Good morning friend, thank you for your post!

I see you are trying to change the heating element on your Frigidaire Crown dryer. I am unable to locate any video to assist in this replacement but I would advise that these intricate parts do require precision and patience, therefore when replacing the exchange of electrical components or removing them from your appliance, I always suggest seeking professional assistance. One must be very careful as these replacements can lead to potential harm. -Matt

Jul 30, 2014 | Frigidaire Dryers

1 Answer

How to change the heating element on a frigidaire dryer


Your best bet is calling a professional for assistance.

May 06, 2012 | Frigidaire Dryers

1 Answer

My dryer is taking about 4-5 hours to dry one load. is the heating element bad? how do you change them?


it sounds like the vent tube is restricted, disconnect and clean, but here is a website to help you if you want to change the element, Good Luck Tim

http://www.partselect.com/dryer+replace-heating-element+repair.htm

Oct 24, 2010 | Frigidaire GLER341A Electric Dryer

1 Answer

Fridgidare Dryer Model #GLER34IAS2/Serial #XD40311703: dryer runs for about an hour then kicks out the breaker.


check the main terminal block and make sure there is no shorted wires.There is also a chance that the heating element has grounded out on the cabinet frame. causing it to draw to much power yet still dry clothes

Sep 12, 2010 | Dryers

1 Answer

Trying to change the heating element


take front cover off first, then top cover, then remove dryer drum belt and drum and replace element

Sep 23, 2009 | Frigidaire GLEQ2152ES Electric Dryer

1 Answer

Dryer won't heat at all don't know if it is the heating element or something else, Runs but don't dry.


Frigidaire is good for electric heating elements going bad, when you change the element i suggest you regrease bearing if you need parts visit whirlpoolpartssurplus.com give me a call i can ship them to you

Jun 26, 2009 | Frigidaire Dryers

1 Answer

How do i change the heating element in my dryer


it's way to hard afor a lay person,call for repair-mike

Jun 19, 2009 | Kenmore 62602 Electric Dryer

2 Answers

Changing heating element on a frigidaire dyer


If you dryer lint screen is located at the top of your dryer your heating element is going to located at the rear of your dryer. You will need to remove the back of the dryer to get to it. You will see a housing and the element is located in there. If you lint screen is located in the door when you open the door then your heating element is located in the front. This one is easier to get to. Simply remove the bottom panel under the door and you will see the heating element right at the front on the right hand side. Make sure you unplug the dryer before working on it. If you have any other questions feel free to ask and also please let me know if this was helpful for you. Good luck and glad to help.

Jan 22, 2009 | Kenmore 63942 Dryer

1 Answer

My Frigidaire electric dryer doesn't heat normally.


some of them dryers have 2 elements and one could be out you have too take drum out too check it

Dec 28, 2008 | Frigidaire GLEQ2152ES Electric Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...