Question about Dell 2200MP Multimedia Projector

1 Answer

The "TEMP" light comes on, flashes, then shuts off

Posted by on

  • cjaux86 Apr 05, 2009

    The temp light flashes and there is not an image projected at all.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 236 Answers

If you have a cooling fan it may not be running or dust may need blown out or possibly the thermistor which controls the fan has gone bad.
Stargazer

Posted on Mar 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Optoma hd73 the temp light is red and wont start fans or light just the standby light on flashing could this be a ballast issue or thermal sensor?


if you projector auto shut down, and Lamp LED Light - Check Lamp - Check Lamp Driver - Check Main Board b. Temp LED Light - Check Thermal Sensor - Check Thermal Switch - Check Fan
26192458-5ikhko5li1ygexrc3uucelrc-5-0.jpg

May 12, 2016 | Multimedia Projectors

2 Answers

Red power, blinking red temp


Hi,

if the Lamp error and Temperature error lights are flashing red this means that there are two separate errors.

  • A flashing lamp light means the lamp failed to ignite. It could be a lamp driver problem or lamp failure. Replace the lamp to resolve the issue. If the issue is not resolved, then service the projector.
  • A flashing Temperature light signals a fan error. Turn the projector off and allow it to cool down. If the light is still flashing after the projector is turned back on, service the projector.
Goodluck..

Feb 25, 2008 | Hitachi CP-X250 Multimedia Projector

1 Answer

What is the proper way to shut it off?


You need to let the projector cool down after turning it off before you turn it back on again. Wait 10 minutes, then it should turn on ok.

Jun 18, 2015 | ViewSonic PJD5111 Projector

1 Answer

Unit will not stay on


Is the fan that cools the projection high intensity bulb running? This sounds like an overheating condition, there is a temp sensor that will shut the machine down if it senses the temp is to high and poses a fire hazard or further damage to the projector.

Jan 15, 2012 | Optoma HD80 Projector

1 Answer

Hi, I have a Christie RoadRunner L6 Projector. When I turn it on the lamp light turns red and it does nothing. This unit does have dual lamps and a lamp replacement lamp light as well. I figured if it was...


I have a Christie RoadRunner L8 that fires up,lamps turn on and about 5 seconds after the lamps fire up it shuts down and both the warning temp. and ready lights flash at the same time. It seems to me it must be a sensor that tells it to shut down thinking that the machine is too hot-all the fans work and all of the filters are clean and it is moving serious air any clue and if so where do I start to look for such items? Thanks in advance Kirk

Aug 16, 2010 | Christie RoadRunner L8 Multimedia...

1 Answer

Dell 2300 MP temp light flashes and projector turns off.


I am experiencing a similar problem with mine. It will cycle on and off without actually powering up fully and then after about the 4th or 5th time it will shut off completely and the lamp indicator light on top illuminates. i am reading in other blogs that this is a design flaw on this unit. let me know if you have found any fixes.

Jan 31, 2010 | Dell 2300MP Multimedia Projector

1 Answer

I have a model PLC-XT11 and when I turn the power on the temp light and green ready light begin to flash. The red lamp light is on steady. I replace the lamp but no luck.


one or more of the fans may not be working right. also, the temp sensor may be shot. if the last time you used it it wasn't shut down properly, it may still be in cool-down mode.

Nov 06, 2009 | Sanyo PLC-XT11 Multimedia Projector

1 Answer

PB6110 Powers down after 30s, splash screen appears, red temp lig


Be sure to check the filters and make sure you have good airflow thru the proj. Cleaning filters solved our temp shutdown problem.

Nov 17, 2008 | BenQ PB6110 Multimedia Projector

1 Answer

Hitachi projector temp light


This is what your projector's user manual says about a flashing "TEMP" light :

"The cooling fan is not operating. Turn the power OFF and wait approximately 20 minutes. After the main unit has cooled down, please make confirmation that no foreign matter has become caught in the fan, etc. After performing any needed maintenance, turn the power ON again; if the same display is displayed, then please contact a sales store or a service company."

Your user manual is available at the following link :
http://www.hitachi.us/Apps/hitachicom/content.jsp?page=Products/SupportServices/Support/DiscontinuedModels/index.html&level=4&section=Products&parent=DiscontinuedModels&nav=left&path=jsp/hitachi/forhome/DisplayTechnologiesGroup/


May 20, 2008 | Hitachi CP-X275 Multimedia Projector

1 Answer

Flashing lights?


Hi there

This sounds like a faulty Powersupply.

Before replacing it , try replacing the fuse on the board first.

Apr 14, 2008 | Fujitsu LPF 7200 Multimedia Projector

Not finding what you are looking for?
Dell 2200MP Multimedia Projector Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Multimedia Projectors Experts

The Knight
The Knight

Level 3 Expert

68386 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

seerads

Level 2 Expert

77 Answers

Are you a Dell Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...