Question about LG 50PC1DRA 50 in. Plasma Television

1 Answer

Plasma model# 50PC1DRA: When turning it on, it will not stay on...it turns itself right off and the red power led stays solid - it does not blink.

Posted by on

  •  Sean Burgoyne
    Sean Burgoyne Feb 05, 2010

    Thank you. Popped panel off and clearly could see about 9 bulging, blown caps on power supply board (3300uF).

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,472 Answers

Hi,
How long have you owned the set and how long have you had this problem? Are you planning on attempting any repairs that may be needed yourself? Once I have more information I can assist you further. Honestly one more boards may/will need to be replaced and the price can range. You may want to consider replacement as well. The power board runs about 200$. It will most likely be either that or the y sus board.
Thank you,
Lee

Posted on Feb 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic plasma st30 will not turn on. When I push the remote power button the red led light comes on and stays solid red. No blinking.


Fault to its main board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Jun 27, 2015 | Panasonic TC-P46ST30 46" Class VIERA ST30...

1 Answer

I have a 42 " Phillips with no pic and no sound. I've replaced the Power Board and CT Board tht corrected the error blinking lights but still have the problem My Light stays solid green and I


Dear Mate
Please share us the Model # and Is that is the Plasma LCD or LED. And tell us Is your`s TV is stay on stand by or its green LED is stable.With No video and sound.

Dec 11, 2014 | Televison & Video

1 Answer

My hitachi plasma tv model: p55t551 every time i


turn tv on the red power light comes on then goes off again

Jun 27, 2010 | Televison & Video

1 Answer

When i turn it on it wont stay on, no picture or sound. The green light comes and then turns back to red, then no color (black)


Power supply board is dead.Must replaced to solved this problems.Tries Shopjimmy.com,Ebay.com for the power supply board part.

Jan 23, 2010 | LG 50PC1DRA 50 in. Plasma Television

1 Answer

I have an LG plasma TV, model: 50PC1DRA. We had a


Defective power board. Maybe best to call local service man.

Sep 28, 2009 | LG 50PC1DRA 50 in. Plasma Television

1 Answer

I have a Jumbo universal remote by Innovage and I need the programing codes for the tv. Do you have them???


To program your remote by entering a code from a manufacturer's list, follow these steps:

  1. Turn on your TV.
  2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
  3. Press the TV button on the remote so that the LED blinks once and then remains solid red.
  4. Enter the first set of 3-digit codes from the list. The LED will blink once every keypress. After the 3rd digit, the red LED will turn off indicating that the code was recognized for the device. If the code was not compatible, the LED will flash several times and you need to return to step 2 to try that code again or to try the next code in the list.
  5. After the LED has turned off, aim the remote at the TV and press ON/OFF. If the device turns off, you have used the correct code and the remote was successfully programed. If the device does not power off, return to step 2 and try again with the next code in the list.


To have the remote try each TV code it knows one at a time, follow these steps:
  1. Turn on your TV.
  2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
  3. Press the TV button on the remote so that the LED blinks once and then remains solid red.
  4. Press the ON/OFF button slowly and repeatedly until the TV turns off. The LED will blink once each time you press the ON/OFF button.
  5. Once the TV turns off, press the ENTER button to store the code and the LED will turn off.

I hope that helps.

Aug 21, 2009 | Innovage Jumbo Remote Control

1 Answer

Philips 42pf7321d/37 blinking power board question


The probleis with one of the maina boards and trouble shooting would have to be done to see which board is bad.

Aug 17, 2008 | Philips 42PF9630A 42 in. Plasma Television

Not finding what you are looking for?
LG 50PC1DRA 50 in. Plasma Television Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

The Knight
The Knight

Level 3 Expert

73665 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...