Question about Hotpoint Aquarius WF220 Front Load Washer

2 Answers

Door light flashing and unable to use the washer

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hotpoint Master
  • 3,463 Answers

If you have ascertained that the door is closed properly, and that the door handle does not feel floppy or weak, then chances are it could be faulty module, as this supplies power to the door lock.

Posted on Feb 05, 2010

Testimonial: "Thanks for your help, best get an engineer in "

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

It happened on our machine. The soloution to this for me was to take the lid off (two screws). Unplugged from mains. I found the connector to the door had vibrated off and was just hanging loose. Plugged it back in and it worked straight away. Door opens as normal.
Don't forget to look in the manual for how to get the door open in an emergency.

Posted on Apr 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Machine has stopped mid wash, wash light is flashing, door locked shut


Your washer can't drain. It is holding your laundry so you can not open the door and cause the water to flood you floor. This is a safety precaution that most manufacturers have in place. You did not leave a model number so I am unable to give you further instructions. Good luck, I am here for your assistance.

Feb 05, 2016 | Washing Machines

2 Answers

Whirlpool AWM 6100/s Front load washer


Sounds like the front door switch has come out of place, or the actuator is out of place. If you can take the front cover off to get to this switch, you should be able to get it back into place pretty easily. Hope this helps, chad

Nov 01, 2008 | Whirlpool AWM6100 Front Load Washer

1 Answer

Lights flashing and unable to start cycle. Helped once when turned off at mains but not now.


Hi it could be your door lock switch your machine on and wait for 6 seconds and try to open the door if you can thats your problem or may be that the door catch ic worn try and push the door shut with a bit more force

Jun 29, 2011 | Hotpoint Aquarius WF210 Front Load Washer

1 Answer

Start light flashing. Unable to adjust


water not entering machine start light flashing and alarm sounds

Nov 13, 2010 | Tecnik TDW2677 Built-in Dishwasher

1 Answer

F21 flashes on the time screen -- am unable to power washer off


Lets see: F21 Long drain Possible cause: Clogged filter0c09ded.jpg, clogged/failed pump Remove the bottom panel299686f.jpg go for the pump cleanout, get the googus outb1cfae3.jpg. Tech sheet is located behind the white box to the left which is the motor control unit (MCU). The tech sheet is an excellent tool which gives directions on diagnosing those pesky fault code. LOL7b78889.jpg

May 18, 2010 | Kenmore Elite 45986 Front Load Washer

1 Answer

Unable to use ZJ1217, start/pause flashing


Are you able to open the door ?if so door interlock switch could be at fault

Oct 02, 2009 | Zanussi ZJ1217 Front Load Washer

1 Answer

My WF740 is also flashing F-05...unable to unlock door!!


The error F-05 indicates that no drain or pressure switch
jammed on full.

Sep 02, 2009 | Hotpoint Aquarius WF000 Front Load Washer

Not finding what you are looking for?
Hotpoint Aquarius WF220 Front Load Washer Logo

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

puggy666

Level 1 Expert

48 Answers

ptpumpman

Level 3 Expert

407 Answers

Cindy Wells

Level 3 Expert

5127 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...