Question about Kenmore 55612 / 55614 / 5561 / 655619 Side by Side Refrigerator

Open Question

Ice amaker does not work

Light in icemaker keeps blinking red and i changed the filter down below in the refrig

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Refrigertor Ice Maker Stopped Working


most icemakers have a metal rod mounted to the side of the unit. this is a "ice level shutoff. in the raised position its off.. in the dowm position its on..try that.. it may be off..

Jan 18, 2014 | Computers & Internet

1 Answer

Ice maker stopped working


The laser , is supposed to blink . This laser , tells the icemaker to stop making ice , when the bin is full . Pour about 2/3 cup of water into the icemaker . If it doesn't dump the cubes into the bin , the icemaker is bad . Or , if there is ice in the bin , which hasn't dumped , the icemaker is bad . If the icemaker dumps the ice ( from water pour ) , then look above the fill cup , and see if the black fill tube is frozen . If so , then replace the water valve and turn the freezer temp down slightly . It will take several days for this fill line inside freezer to thaw . If icemaker dumps , and black tube NOT frozen , replace the water valve . The valve , is where the wall water line connects to on the refrig .

Sep 05, 2009 | KitchenAid KSRP25FNSS Side by Side...

1 Answer

I have a Whirlpool refrige. side by side and the ice maker has stopped working. The infrared light keeps blinking. I have unplugged it a couple of times as well as turned the infrared off. Any advice?


The laser , is supposed to blink . This laser , tells the icemaker to stop making ice , when the bin is full . Pour about 2/3 cup of water into the icemaker . If it doesn't dump the cubes into the bin , the icemaker is bad . Or , if there is ice in the bin , which hasn't dumped , the icemaker is bad . If the icemaker dumps the ice ( from water pour ) , then look above the fill cup , and see if the black fill tube is frozen . If so , then replace the water valve and turn the freezer temp down slightly . It will take several days for this fill line inside freezer to thaw . If icemaker dumps , and black tube NOT frozen , replace the water valve . The valve , is where the wall water line connects to on the refrig

Sep 05, 2009 | Whirlpool 25.6 cu. ft. Side-by-Side...

1 Answer

I have a Whirlpool refrige. side by side and the ice maker has stopped working. The infrared light keeps blinking. I have unplugged it a couple of times as well as turned the infrared off. Any advice?


The laser , is supposed to blink . This laser , tells the icemaker to stop making ice , when the bin is full . Pour about 2/3 cup of water into the icemaker . If it doesn't dump the cubes into the bin , the icemaker is bad . Or , if there is ice in the bin , which hasn't dumped , the icemaker is bad . If the icemaker dumps the ice ( from water pour ) , then look above the fill cup , and see if the black fill tube is frozen . If so , then replace the water valve and turn the freezer temp down slightly . It will take several days for this fill line inside freezer to thaw . If icemaker dumps , and black tube NOT frozen , replace the water valve . The valve , is where the wall water line connects to on the refrig .

Sep 05, 2009 | Whirlpool Refrigerators

1 Answer

Kenmore refrig mod # 507920. Icemaker working


check to see if the hose going into icemaker is frozen. unclog it

Aug 24, 2009 | Refrigerators

1 Answer

Ice maker not producing any ice.


Pour about 1/2 cup of water into icemaker . Squeeze the black fill tub which is above the icemaker cup . If ice apears to be in it , this indicates that the weter valve is not completely closing , letting a drip ocasionally go thru and freezing inside the tube , ( water valve bad ) . that will be a different solution . If the icemaker dumps the cubes after freezing . and black tube is not frozen , replace the water inlet valve . If the icemaker does not dump the ice after frozen , replace the icemaker ( only 1 screw holds the icemaker in , located on rear portion on right , faceing down . Also check the icemaker rake , which should be about the 2:30 position . To thaw out the black tube (which runs thru the top of the refrig ) a 1/4 push on connector will be needed . Remove the icemaker and use a hairdryer aimed up into the hole . Cut the tubing to the fill tub behind the fridge about 9 inches from where it enters the top of the fridge . This will let warm air inside the top fill line to help thaw . Ocassionally blow thru the 9 inch tube until you can blow thru it . May take a day or 2 , depending how frozen the line is . Once air will go thru , install the push on connector to couple the cut lines back togather .

The blinking red light on the right side , is the receiver for the electric eye for cutting off the icemaker when the door bin is full , This blinking is normal . 2 blinks ...pause...2 blinks..etc .

Do not replace the filter if water flow is good thru the dispensor .

Aug 16, 2009 | Whirlpool Gold White-on-White 21.9 cu. ft....

1 Answer

Ice maker has ice in it but will not dump in bin!


before i would worry about the lights flashing lets pull the front cover off of the icemaker and verify that the drive gear is not broken.

on the bottom of the icemaker is 1 screw. remove that screw then just slide the entire icemaker out of the refrig so that you can access the front cover. if the gear is broken just replace the front motor module pt# 8201515

if the gear is fine then located in the toe grille of your refrig is a tech sheet that will help you troubleshoot red light blinking.

Dec 17, 2007 | Kenmore 55612 / 55614 / 5561 / 655619 Side...

3 Answers

Ice Maker on/off switch has blinking red light, will not produce ice. Manual no help


When you open the freezer door the light should be blinking. When you hold the flipper door shut (on the left hand side) without blocking the beam, the light should stay on solid. If all of this happens then the optics are o.k. If optics are ok then you most likely have a broken motor module on the icemaker and should replace the icemaker thermostat along with it. A bad icemaker thermostat will lead to the module breaking. If you not sure how to replace these parts then I would just replace the whole icemaker. That would be easiest and usually not much more expensive.

Nov 07, 2007 | Whirlpool ED2FHEXN Side by Side...

Not finding what you are looking for?
Kenmore 55612 / 55614 / 5561 / 655619 Side by Side Refrigerator Logo

1,844 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Refrigerators Experts

Sal DeAngelo

Level 3 Expert

2122 Answers

dweatherby

Level 2 Expert

239 Answers

paulcarew

Level 3 Expert

2461 Answers

Are you a Kenmore Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...