Question about Polaroid FLM-3232 Television

1 Answer

Polaroid 32 lcd hdtv/monitor model flm-3232

Hi, James thanks for excepting my buddy invite.
Tv made fairly significant pop noise thrn turned itself off.I think I narrowed it down to a transformer on the main power board. I guess my question is : How can i check to see if that is the problem. And if there is a way to test for it can i replace it myself ? Will a blown transformer cause the tv to turn off as a safety precaution to protect itself from further damage?
I can solder very well. Bye for now and thx. Anthony

Posted by on

  • ONEAL Feb 27, 2008

    who sells polaroid tv parts and service manuals

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 362 Answers

Yes you have to test voltage but you must plug it in and check the power supply board first, the most common problem for those things is the 24 volt transformer in the power board fails check it for 24 volt output first, then trace the power route from there and the component that the board traces lead you to that dont transfer power through it will most likely be the problem but start at your power suopply and work outward from there. mine the 24 volt converter or transformer blew. i have been looking for one for 4 months. there is a eeprom in the main video board that blows also its easily found, it turns the unit on from the standby switch. check it also with a volt meter. you cant miss it on the board.

Posted on Feb 25, 2008

  • james kilgore
    james kilgore Jul 01, 2008

    as far as who sells parts its best to get them from anywhere new or used check e bay

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't get my web cam picture and my daughters to be on the screen at the same time. what do I doI have the web cam turned on. I can see my face. Then I signed on to AOL IM and got my daughter on-line...


You need to send your video to her also, meaning you need to activate your camera from your side. This is how you do it:

1. Double-click a buddy on your Buddy List window.
2. In the instant message (IM) window, below the buddy icon, click the camera ( aim7_im_wndw_cmra_icn.gif ) icon, and then click Start a Video IM
3. Your buddy will now receive a Video invitation. Once he or she accepts your invitation, the Video window will pop up. You can now begin talking.

Also, you can set AIM to automatically accept all Video invitations from your buddies. To do that, at the top of the Buddy List, click Menu, and then click Settings. Click to select the Enhanced IM tab, select the box next to Video, and then click Save.

Hope this helps!

Aug 22, 2010 | Microsoft LifeCam VX-3000 Web Camera

2 Answers

Invit a friand in modern warfare


The problem is most likely your friend is not accepting, the 'MW2' invites are different to previous COD's, they are sent as a message, rather than in game pop-up.

Nov 13, 2009 | Video Game Consoles & Games

5 Answers

TV TURNS IT SELF OFF AND ON I HAVE A LG 42'' MODEL 42PC3DV


hi,
you need to replace it.I think it is 4AH250V. You can buy it from any electronics shop near u or u can get it from ebay.com

Thanks!
Sandy

May 22, 2009 | LG 42LC2D 42 in. LCD HDTV

2 Answers

Makes a poping noise out of the speakers when i turn it on? can ya help plz thnks james


If you have no video and its making a popping noise its mostlikely shorted convergence circuits. Contact www.TvRepairKits.com and ask them to make you a kit for chirping sets.

May 16, 2009 | JVC AV-48WP30 48" Rear Projection...

2 Answers

Onkyo digital reciever has poping noise when in dolby sound


I have the same reciever, and had the same problem.  Contact Onkyo, this is a known issue where defective DSP chips were used and manifest problems with a popping / clicking sound when using surround settings.  These receivers also have a Dolby Digital input issue that can cause audio dropouts when watching cable or SAT broadcasts that encode DD using a 'newer' broadcast encoding methods.  Onkyo is covering the cost of that repair for me now, even though the receiver is 5 years old now....

Jan 02, 2009 | Onkyo TX-DS797 Receiver

2 Answers

Toshiba 50 rear projector tv


can you post a picture of what the picture looks like? I may be able to help if I can see what the picture is actually doing.

Jun 08, 2008 | Toshiba 50H82 50" Rear Projection...

1 Answer

40" cs-40503 Popping noise


Sounds like there is a lot of dust on the crt, itself. This will cause a high voltage "snap" which I think you are hearing. This sometimes happens when there has been a spill of water or other liquid that has run or dripped down on the crt. Usually is not a problem if you turn the power off, unplug the cord from the wall outlet, take off the cover, let it set for a while( just to make sure the Hi voltage has drained off), disconnect and ground the hi voltage lead to assure drain down, then clean the dust off of the crt. Follow the dust off with a damp rag and wipe off all of the remaining dust that you can. Let things dry for a half hour or so. Reassemble and see how it works. I have had several $10 tv's that this process has worked well on. Each one lasted several years at least.
Ron-

Nov 09, 2007 | Mitsubishi CS-40503 TV

2 Answers

Popping noise


Our Sony (almost new) is experiencing sound problems. The sound go off and on about every 10 seconds. Cords appear correctly connected. It sounds as if its coming from the television.
Can you help with this problem?
Thanks,

Mike

Oct 21, 2007 | Sony BRAVIA KDL-40S2000 40 in. LCD HDTV

1 Answer

RCA has no sound


well u have a problem in the audio circuits of the tv which includes the speaker itself. but most of the time the audio power output transistor or ic get easily damaged resulting a no sound tv. if u dont have any idea with regards to this, i suggest have it check with a qualified service technician. it will not cost u a lot for sure.

Jan 17, 2007 | RCA F36665 36" TV

Not finding what you are looking for?
Polaroid FLM-3232 Television Logo

459 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75774 Answers

matt martin
matt martin

Level 3 Expert

1229 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...