I need to know where the exponet button is to do my math lol i thought it was x 2 but i need to be able to put in whatever number i want in the exponet part can u help me im lost here

Ad

The letter 'e^x' is the button for exponent. it is the same as shift of "lnX"

hope u find it now

have a nice day

bye

I hope my solution was useful

Posted on Feb 26, 2008

Ad

Hi there,

Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

each unit in sq ft is 1 X 8 = 8 sq ft X 16 =128 cubic ft and you have an area of 1088 square ft

not the same to get a quantity so think about the first dimension as you only need 2 to get sq ft

female or not , this is simple grade 3 maths in area measurements

not the same to get a quantity so think about the first dimension as you only need 2 to get sq ft

female or not , this is simple grade 3 maths in area measurements

Jan 24, 2018 | Heating & Cooling

Sometimes the rotor button contact slips off the cap when you put it on. Check that and also if you have gotten anything inside the cap causing a cross fire. Most importantly!!!! Did you happen to cross any wires? Thought I had them on right but had 2 on wrong cap contact..lol.. ran but rough. Also just thought of the plug gap. Hope this helps without me looking at it. Good Luck.

Apr 19, 2015 | Cars & Trucks

If you mean an exponent of ten, use the EE key located just above the 7 key. For example, to enter 2.1 times ten to the seventh, press

2 . 1 EE 7

If you mean to raise a number to a power, use the y^x key located just above the divide key. For example, to enter 2 raised to the 3, press

2 y^x 3 =

2 . 1 EE 7

If you mean to raise a number to a power, use the y^x key located just above the divide key. For example, to enter 2 raised to the 3, press

2 y^x 3 =

Dec 05, 2012 | Office Equipment & Supplies

For negative numbers (not just exponents), make sure you use the (-) key just to the right of the decimal point key, not the - key for subtraction.

For what follows I'm going to assume you have at least version 2.53 of the operating system for the 84Plus. If you have an older version, I STRONGLY recommend you update it:

http://education.ti.com/educationportal/sites/US/productDetail/us_os_84plus.html

You can use the "n/d" command in the MATH/NUM menu to enter the division bar. For example, to enter 1/2, press 1 MATH right-arrow ALPHA [D] 2 ENTER. If you just want the number, you can also enter it as 1 / 2.

You can convert a decimal number to a fraction using the >Frac command in the MATH menu. For example, to convert 0.2 to a fraction, press . 2 MATH 1 ENTER.

For what follows I'm going to assume you have at least version 2.53 of the operating system for the 84Plus. If you have an older version, I STRONGLY recommend you update it:

http://education.ti.com/educationportal/sites/US/productDetail/us_os_84plus.html

You can use the "n/d" command in the MATH/NUM menu to enter the division bar. For example, to enter 1/2, press 1 MATH right-arrow ALPHA [D] 2 ENTER. If you just want the number, you can also enter it as 1 / 2.

You can convert a decimal number to a fraction using the >Frac command in the MATH menu. For example, to convert 0.2 to a fraction, press . 2 MATH 1 ENTER.

Mar 16, 2011 | Texas Instruments TI-84 Plus Silver...

Use the xth-root function accessible by pressing MATH 5. For example, to find the third root of 8, press 3 MATH 5 8 ENTER.

Nov 25, 2010 | Texas Instruments TI-83 Plus Silver...

This sounds like an Ancient model......LoL ! The Wig-wag shifts between agitate and spin. They went bad often ! Is this a pre 1985 Model ? If so, the wig -wag is a possibility. If it agitates, the belt is still good.Hope this helps.

Jan 04, 2018 | Whirlpool CAM2752KQ Top Load Washer

hi m8,, grab your self a meduim grade fork oil,,and get half a litre,,put half of the half litre bottle in to each fork leg,, if u can only get 1 litre bottles, put a quarter of the bottle in 2 each leg,,leaving half a bottle,, sorry if i soundid like a maths teacher there, but u would be amazed wot questions are asked in here,,lol,, cheers m8

Apr 19, 2009 | 1989 Yamaha Xv 250 Virago S

Hi Dear,

here is the code in c, for positive integeral exponent, you can convert it in any other programming language.

#include "math.h"

float (float base, unsign int expo)

{

int x=abs(expo), i;

if (x<=1)

return(base);

else

return(base*float(base, expo-1);

}

Hope this will help you out.

for any clarification please feel free to contact me

bye

Zulfikar Ali

ali_zulfikar@yahoo.com

09899780221

here is the code in c, for positive integeral exponent, you can convert it in any other programming language.

#include "math.h"

float (float base, unsign int expo)

{

int x=abs(expo), i;

if (x<=1)

return(base);

else

return(base*float(base, expo-1);

}

Hope this will help you out.

for any clarification please feel free to contact me

bye

Zulfikar Ali

ali_zulfikar@yahoo.com

09899780221

Mar 03, 2009 | Intel Computers & Internet

for my 82 i put my fraction in parentheses then press MATH and scroll to >FRAC

Feb 05, 2009 | Texas Instruments TI-30XA Calculator

Please help me to find the answer for my problem with TI-84:

If I'd like to work with:**nDeriv(3X^3+2x^.5),X,1) **

then I press Enter button, the sreen shows Error...

Please help me to get the answer for this problem. Thank you very much!

If I'd like to work with:

then I press Enter button, the sreen shows Error...

Please help me to get the answer for this problem. Thank you very much!

Apr 10, 2008 | Texas Instruments TI-84 Plus Calculator

90 people viewed this question

Usually answered in minutes!

1+0.07 to the 15 power, how do i calculate that on my claculator, what buttons do i hit?

×