Question about Linksys : WRT54GS Wireless-G Router W/ SpeedBooster (NELIWP17)

2 Answers

My Linksys WRT54GS ver. 6 Router continuously blinks

My Linksys WRT54GS ver. 6 Router continuously keeps blinking when i connect it. Everything is connected the way it should, I know that for a fact, but the lights never become solid. It goes through the sequence but after a couple seconds it seems as if it keeps rebooting itself.

I tried clicking the reset button a few times but that didn't do anything either. Also tried accessing the router but doesn't seem to work either.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,260 Answers

Try to upgrade the firmware of the router.
Is there any computer connected to the router with
the cable.
If not then you will need to connect the computer
to the router.
Download the firmware of the router from the
linksys website www.linksys.com/download
enter the model number. elect proper version
number and download the firmware of the router.
Firmware of the router.
Once you download the firmware, you will need to
open the router set up and upgrade the firmware of
the router.
After upgrading the firmware, it is recommended
that you reset and reconfigure the router.
Click Here for more information about router and
networking

Posted on Feb 04, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 163 Answers

Try un-plugging all the cables from the router for 30 seconds, then re-connect them.

Hope this helps!

Posted on Feb 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Looking for pdf owner manual for wrt54gs ver. 6 wireless-g broadband router


Feb 05, 2011 | Linksys Wireless-G WRT54GS Router...

1 Answer

I have both a WRT54G v2.2 and a WRT54GS v6. Same Power Specs?


I have the Linksys WRT54GS ver 6 wireless router. It uses a 12VDC power supply @ 500mA. The center of the post is + and the outside of the post is -.

May 10, 2010 | Linksys Wireless-G WRT54GS Router...

1 Answer

Linksys WRT54GS that is out of warranty. Power light keeps blinking on and off and unable to connect.


Blinking power is a sign that something is already wrong with the router, that can be a software of a hardware failure already, to fix this one lets reset the router by pressing the reset button of the router for 30 seconds while power is ON and then after that unplug the power for 10 seconds and check if the power will be solid....

Dec 07, 2009 | Linksys Wireless-G WRT54GS Router...

1 Answer

No internet connection to secondary computer in house


check the ip address, check if the ip address on the 2nd computer is the same with your linksys.. check also the cables, u will notice the cable attached to the computer that it will blink.. make sure that it will blink like orange color.. check connectivity.. physical connection first

Sep 24, 2009 | Linksys Wireless-G WRT54GS Router...

1 Answer

The Linksys WRT54G ver.6 worked until yesterday when I lost access to the internet. The "power" light is blinking continuously, so I went through the troubleshooting exercise of power off, power on - no...


Blinking power light usually indicates device being faulty. Was there a power surge? Try resetting the router by pushing the small reset button at the back with a pin for 10 seconds, then power it off and on. See what happens

Jul 05, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Help


You do not need the manual or CD

1. Turn off both the linksys and your modem
2. Turn on your and wait for the usual lights to turn solid
3. Turn on the Linksys and wait 30 secs
4. Press the button on the front to the left. It does not look like a button but flashes while it is finding an ip address
5. now connect with an Ethernet Network Cable and make sure the internet is working
6. Next Setup the Wireless Encryption, if you don't know how to do this, post and I will help
7. Disconnect the cable and Connect Wirelessly

If you have limited connectivity then next try this: http://www.howtofixanything.co.uk/howto-269.html

Jan 02, 2009 | Linksys Wireless-G WRT54GS Router...

1 Answer

I have a time warner cable modem model U10CO18 and i want to connect it to a linksys wireless-g broadband router with speedbooster model wrt54gs ver.6 i dont have cd-rom or user manual i was wondering if...


I have a step by step guide here on how to setup a linksys router with cable internet. just click this link.

I hope this helps. But if you still have a problem just reply to this post.

Jan 02, 2009 | Linksys Wireless-G WRT54GS Router...

1 Answer

I want to connect a linksys wireless router


Hi,
please visite this URL:

http://www.thinkbroadband.com/hardware/reviews/2002/q3/bto-linksys.html

Regards,
Azeem
Voice : 00923004167636
e-mail : toazeem.pk@hotmail.com

wireless-network-setup-11.gif


Jan 02, 2009 | Linksys Wireless-G WRT54GS Router...

1 Answer

Linksys WRT54GS not detected


Hi,
I am having the same problem with the WRT54XG4 but i discovered that if you disconect the internet port of your router and leave the ethernet port conected to your computer. You can access to the router and you can upgraded.

Hope it help you

bye

Feb 24, 2008 | Linksys Wireless-G WRT54GS Router...

2 Answers

Will a set up disk for a WRT54GS v.6 Linksys wireless router work to set up a v.1 router?I CANNOT use or make Firma-ware, or whatever that is, work. Where can I get a driver disk for a WRT54GS v.1 Linksys...


You really don't need the disk. Just plug the wires in and push the square button on the left hand side with the Linksys logo and that will set it up. Just wait until the light is a steady orange color. It will blink white while it's setting up. It could take a couple minutes.

Nov 09, 2007 | Linksys Wireless-G Broadband Router

Not finding what you are looking for?
Computers & Internet Logo

317 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...