Question about Dymo DateMark Date/Time Stamper

2 Answers

My Dymo DateMark won't print.

The P.reset is flashing but when I take off the case and push the printer reset button, it just beeps but doesn't fix anything.

Posted by on

  • 3 more comments 
  • Anonymous May 01, 2008

    i have tried doing that but it still not printing the p reset is still blinking

  • Anonymous Aug 18, 2008

    My Dymo Datemark won't print, the same problem p reset keep blinking. What can i do.

  • Anonymous Nov 25, 2008

    I tried changing all the batteries, including the flat battery, and I still can't get the P-Reset to go away.

  • AGONZALES160 Feb 10, 2009

    P.RESET IS FLASHING AND I JUST CHANGED ALL BATTERIES INCLUDING THE FLAT ROUND BATTERY AND STILL WON'T PRINT.

  • marynortonma
    marynortonma Mar 19, 2013

    make sure you have the cartridge in the right way! I put mine in backwards, they are so tiny was hard to tell!

×

2 Answers

Open the back cover where the batteries are and press the pinter reset button

Posted on Sep 04, 2008

Try changing the flat battery. it worked for me!

Posted on Mar 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannon mp170 orange light flashes twice then pauses then flashes twice and so on i cant get my printer to do anything


Try resetting the printer:

1 - power off.
2 - hold stop/reset ,hold ON/OFF
3 - release stop/reset, push stop/reset twice, quickly, then release ON/OFF
4 - wait untill LCD display shows "Canon Idle",then push stop/reset four times, quickly
5 - then push power twice, quickly
6 - power off and power on.

Nov 27, 2011 | Canon PIXMA MP170 All-In-One InkJet...

2 Answers

How to reset ink level after refilling canon mg 5220


You should not have to reset anything. When you put in the cartridge and snap it into place, it should automatically reset. If it did not, make sure you removed the plastic and that the cartridge is snapped into place and the red light is on. If you're still having problems, let me know.

Nov 11, 2011 | Canon Pixma MG5220 InkJet Printer

1 Answer

In use memory light flashes continually. memory list report says nothing in memory. nothing in printer queue on computer.


Hello


It may be the cartridge...try removing it and then reseating it. If that doesn't do it, clean the contacts with water or isopropyl alcohol.(power off when you do this)

1, Power off the printer

2, Unplug the printer's power cord, wait 5 seconds then replug the power cord in.

3, Hold the Power button for 6 Beeps

4, Release the Power Button

This will reset the printer and should resolve incorrect cartridge detection problems

Jun 28, 2011 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

Mfc-7840 brother printer is saying drum error and will not print anything


You need to replace the drum unit,the drum unit is the case in which lies the toner.Try to reset the drum unit like that:

1.the printer is online
2.open the cover
3.push a button clear or check on the panel with the cover open and then push reset drum

If i have been useful please give me a vote :).Thanks

Mar 29, 2011 | Brother MFC 7840W Printer

1 Answer

All lights are flashing


A) E5, E6 or E4 - it is cartridges error - to fix press the "stop\reset" button for 5-7 sec. and then release
it.

B) E27 - it is code for reset absorber (EEPROM reset or Waste
ink counter reset) and follow the described below
procedure:

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off

1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset

5) Turn off the printer.( it must be turn off)
then turn it on again.


Only in B) case you can enter into "service mode", in A) case or if have e.g. paper jam, or another error you CAN'T enter
the "service mode"
Try it

Anonymous see A) case: E5, E6 or E4 - it is cartridges error - to fix press the "stop\reset" button for 5-7 sec. and then release
it.


All the best Pineworks

May 01, 2010 | Epson Stylus Multifunction Inkjet Printer/...

2 Answers

Printer keeps on flashing E-5 and is not printing out anything


A) E5, E6 or E4 - it is cartridges error - to fix press the "stop\reset" button for 5-7 sec. and then release
it.

B) E27 - it is code for reset absorber (EEPROM reset or Waste
ink counter reset) and follow the described below
procedure:

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off

1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset

5) Turn off the printer.( it must be turn off)
then turn it on again.


Only in B) case you can enter into "service mode", in A) case or if have e.g. paper jam, or another error you CAN'T enter
the "service mode"
Try it

Anonymous see A) case: E5, E6 or E4 - it is cartridges error - to fix press the "stop\reset" button for 5-7 sec. and then release
it.


Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Mar 26, 2010 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Canon ip1800 printer not working


Hi,

when the yellow led flashes is never a good signal... you should check the manual's printer to find out the error code meaning "4 yellow flashes and 1 green)
Usally it's the waste tank that is full, in this case you need to:

  1. Push “resume” for 5 seconds for canon IPXXXX.
  2. Push Power switch then remove power cord.
  3. Insert plug power cord while pressing “power switch” at the same time.
  4. Push Start/reset by step 2 continue Wait display shown “0′
  5. Push + change display from “0′ to “1′
  6. Push color button 2 times
  7. Push Power switch again , Printer will print 1 page
  8. Open cover
  9. Unplug power cord
  10. Take out ink cartridge #40 and #41
  11. Insert plug again
  12. Push power switch
  13. Open cover (scan cover)
  14. Insert ink cartridge #40 and #41 again

Jul 18, 2009 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

Zebra 2844 won't print anything.


Sounds like you may have taken out more than the fuse. In case there is still life the next thing to try is a printer reset

1) Turn printer off.
2) Hold down feed button whilst turning printer on.
3) Let go of the feed button as soon as it starts to flash and then wait.
4) Printer will measure out 4 labels then print out a Hex dump ending with a not to "Push Feed to Exit"
5) Push feed

Follow the above instructions, if you mess around tapping the feed button (not following the above) you can change the printer between line mode and page mode. To swap that back is another storey.
David

Jan 26, 2009 | Zebra LP 2844 Thermal Printer

1 Answer

HO Laser All in one printer


Reset printer, perform a NVRAM INIT
Turn off powerswitch- press and hold * and Menu/Enter on keypad of printer - While continue holding down buttons, turn on the powerswitch.. after a few moments it will begin to beep and say "perminante storage init" release the buttons and wait for the unit to re-initialize.
As always when perform a disc reset, you loose your settings.

Sep 05, 2008 | HP LaserJet 3030 All-In-One Printer

3 Answers

My Canon Pixma MP170 printer is showing error code 5800, What must i do to fix this?.


MP170 (5b00) Ink Tank Full Error Reset

1,power off.

2,hold stop/reset ,hold ON/OFF

2,release stop/reset, push stop/reset twice, quickly, then release ON/OFF

3,wait untill LCD display shows "Canon Idle",then push stop/reset four times, quickly

4,then push power twice, quickly

5,power off and power on.

Jul 15, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

1,578 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dymo Office Equipment & Supplies Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Ed Mac

Level 3 Expert

717 Answers

Jax Planet
Jax Planet

Level 2 Expert

921 Answers

Are you a Dymo Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...