Question about Frigidaire Gallery 30" Self-Cleaning Freestanding Gas Convection Range - White

1 Answer

How do I raise the cooktop on my Frigidaire Gallery Model #GLGF377ASE . I need to access the burner orifices.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Frigidaire Master
  • 8,220 Answers

If you raise up the top you will break the tubing going to the burners. You must remove the screws on each sealed burner before raising the top. Look closely and you will see the screws. They will be hard as heck to come out. If a stove is real old and I cannot get the screws out I dremmel the screw heads out and drill out the screws. I do a repair and then pop rivet the burners back on. If I have to go back in there it is nothing to drill out a pop rivet. That is how I do it on real old stoves. You may figure out a better way. You have to get those burners loose or you will break those lines below the top.

Posted on Feb 04, 2010

Testimonial: "Thanks! Great advice. Did just what I needed to do."

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is cooktop burner flame uneven?


Check for clogged burner orifices.

Mar 22, 2016 | Frigidaire Kitchen Ranges

1 Answer

Model 790 70613210. How do I relight pilot?


Hello. There is *no* pilot on this range! You have a glow bar for both the bake and broil functions in the oven. The bake glow bar part number is (#19) 316489402(see pic 2). The ignition module(that provides the high voltage for the spark posts at each of the surface burners is (#8) 316262400. The ignition harness(that has four ignition switches daisy-chained together is (#3) 316580615. The sealed burner for the LF and LR is 316558300(quantity 2). The RF burner is 316438600. The RR burner is 316438200.
RF orifice/ignitor assembly 316536614
RR orifice/ignitor assembly 316536610
LF orifice/ignitor assembly 316536602
LR orifice/ignitor assembly 316536600
BURNER HEAD SCREWS (QUANTITY 8) 316540900
LP CONVERSION KIT (#47) 316542414
If you are hesitant about the disassembly on the range, I strongly advise calling for service--The cooktop must be removed to exposed the ignition parts. This is accomplished by releasing the burner heads from the cooktop. The mount screws on the burners are notorious for seizing and the heads breaking off on removal. If this happens, the orifice/ignitor will have to be replaced for every burner with which this occurs. It can be expensive! I hope the diagrams and part numbers help you!


25902472-rxxyhzi5tgop52hwgyt1zd3q-5-0.jpg

25902472-rxxyhzi5tgop52hwgyt1zd3q-5-2.jpg

25902472-rxxyhzi5tgop52hwgyt1zd3q-5-5.jpg

25902472-rxxyhzi5tgop52hwgyt1zd3q-5-9.jpg

Oct 10, 2015 | Kenmore Kitchen Ranges

1 Answer

Frigidaire ceramic stovetop burner not working


The switch controlling the burner is just a voltage controlling unit (rheostat). It needs to be replaced

Aug 30, 2014 | Cooktops

1 Answer

Why won't the top burners light or perform at 100% on my frigidaire glgf377ase?


sounds like the gas supply line to those burners are clogged. a needle or toothpick should unclog them with no problem

Jul 14, 2012 | Frigidaire Kitchen Ranges

1 Answer

Thermador sgcs365rw - I need to replace the cover for the on/off light. To access it I need to open remove the cooktop but one of the venturi is stuck fast. How can I undo it?


Hello- You got lucky and only have one stuck, unfortunately you will need to order a few more parts. The only way to get the venturi out is to drill it off, drill it down enough that you can get the burner around what use to be the nut portion of the venturi. You will also need to get the orifice holder that the ventrui screws into under the cooktop. These parts are pretty cheap. You could try to put some LIquid Wrench around the ventrui overnight but be sure not to try to force it out too much because the gas supply tube to that burner can get creased if the orifice holder starts to turn... What works best for me to drill the venturi is a countersink, preferably for metal, which has it's largest diameter bigger than the outside of the venturi. Get some cutting oil and start drilling, the ventrui's cut pretty easily but take your time and try not to damage the burner. Once you get down real close to the burner you can try to carefully pry the burner over the remnants of the venturi. Good luck, hope this helps. Best regards.

Sep 27, 2010 | Thermador SGS36GS Gas Cooktop

1 Answer

How to replace maintop (cooktop) frigidaire oven FGFG79GBA


To remove the main top first remove the grates,
burner caps and burners. Using a ¼” socket
wrench or nut driver remove the mounting
screws at each burner orifice assembly.

Insert a putty knife or similar tool between the
main top and manifold panel near the outside
of the front corner. Push the putty knife toward
the rear to release the maintop mounting clip.
Repeat for both sides.

When the mounting clips are released the front
edge of the cooktop can be lifted. Make sure
that the orifice assembly does not bind in the
cooktop when raising the top to remove it from
the range.

Lift the front of the cooktop and pull forward to
disengage the back edge from the rear hinge
bracket. The cooktop can now be replaced by
reversing the previous steps.

See Manual at http://www.electroluxtopservicelatam.com/image/Manuals/Services%20Manuals/Preparation/Cooking/30%20Inch%20Freestanding%20Gas%20Ranges%20(5995440277).pdf

Dec 16, 2008 | Frigidaire FGF316 Gas Kitchen Range

1 Answer

Element on ceramic Frigidaire Gallery cooktop won't go off.


take knob off and check the middle is not split and hence not turning the shaft

Nov 20, 2008 | Frigidaire Cooktops

6 Answers

Converting Kenmore gas range to LP???


I just converted mine and the regulator plug was not the same as the one in the manual. It had a black plastic piece snapped into the cap that had to be turned over for LP. I unsnapped it and turned it over. I changed the nipples for the burners and they worked great. The oven orifice had to be turned all the way down (clockwise) ans the air damper opened.
When I did all this the oven still had a large yellow and blue flame. I raised the oven orifice up 2 turns and then turned it down all the way and the oven flame was perfect! The oven orifice is hard to turn so make sure that you turn it all the way down using a 1/2 inch wrench.

Sep 30, 2007 | Kitchen Ranges

1 Answer

Can't boil water on new Maytag Gas Cooktop


No adjustments.  You will need the correct orifices.  Contact maytag to get the correct ones.  They should send them to you for free.

Nov 18, 2006 | Maytag MGC6536 Gas Cooktop

Not finding what you are looking for?
Frigidaire Gallery 30" Self-Cleaning Freestanding Gas Convection Range - White Logo

550 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Ismael Rodriguez...

Level 2 Expert

162 Answers

Mike Carew

Level 3 Expert

969 Answers

Are you a Frigidaire Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...