Question about Toshiba 28N33 28" TV

1 Answer

Assistant TV shuts itself off. TV will be on for an undertermined time and Red LED power light on front will flash then TV turns off. TV will turn back on either by remote or power button on set and the majority of the time will continue to shut itself off immediately after being turned on. If TV is left off for a long time TV will stay on for about an hour then start shutting itself off again. TV is periodically switching itself off, at random intervals. When this happens the green light under the standby light comes on and flashes, as if the timer has been set. However, we have checked the timer and it is not set!an you help as the manual isn't very usefull for this problem.

Posted by on

  • Anonymous Jul 18, 2008

    I have the same problem with a 13 inch Toshiba purchased from Zellers and there was no manual or remote. I bought a univeresal remote but it doesn't work either. Basically I been wasting my time and money. I took it into repair shop; at the shop it was on for a few hours and they thought it was ok. But now it turns on and a vertical line across the middle is all I get. It's been this way since day 1 - not working. Why didn't i return it? The intermittent thing bugs me; I'd like to know "why" it does what it does, but it really isn't worth my time anymore.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Is this electricity pocket plugged up to a timer ? or take the tv back to the shop... lost the receit just look for the same tv on computer

Posted on Dec 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV does not turn on. Stand By LED blinks 4 times and pauses and blinks 4 times again Tv will not turn on...when plugged in the red stand by light flashes 4 times...you can hear the tv turn on but a black...


On older Sony, sometimes a power surge causes the set to be in shut down mode. Try unplugging for 5 minutes and then plug in and try. This many times will fix.

May 31, 2009 | Sony KV-27S42 27" TV

1 Answer

RCA 32V434T Flashing Red Light


Flashing led..in protect mode..internal shorted component.

Aug 14, 2008 | RCA F32450 32" TV

1 Answer

My tv willnot turn on


When it shuts off. Try doing what's called a self-diagnostic test.
As soon as the television shuts try these steps.

Pressing on the front panel's ?INPUT? and ?MENU? buttons at the same time, and holding for 5 seconds,
activates the Self Diagnostic Code Mode. The LED flashes denoting a two digit Error Code, or indicating no problem
has occured since the last Initalization.

Please do Note: The front panel buttons must be used, NOT those on the Remote Control.

? The number of flashes indicates the value of the MSD (tens digit) of the Error Code.
? The flashing then pauses for approximately 1/2 second.
? The LED then flashes indicating the value of the LSD (ones digit) of the Error Code.
? The Error Code is repeated a total of 5 times.
Example: If the Error Code is ?24?, the LED will flash two times, pause, and then flash four
times.

The Error Code designations indicating a malfunction, or no malfunction, are listed below:
Self Diagnosic Code Description
1 - 2 = no error detected
2 - 1 = X-ray protect (high voltage or beam current)
2 - 2 = Short protect (short protect monitors low voltage supplies)
2 - 3 = Deflection protect (this could be loss of vertical or horizontal deflection)
2 - 4 = Vertical protect (usually loss of vertical from the source).

Jun 09, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Assistant


check your sleep timer settings thats the most comman prob

Dec 18, 2007 | Philips 27PT81S 27" TV

1 Answer

Click and light on front flashes!


This showing the tv have power. Maybe when you pushed the power button it clicks and shuts down then show the red light bliking showing one code. Some shurt on horizontal board or loose some voltage from power supply. This is not easy if you don't have experience with electronic. I'm sorry still tring

Sep 07, 2007 | Sony KV-35S66 35" TV

1 Answer

TV LED Flashes then TV shuts itself off


capacitor problems in power supply or a regulater isolate the power suppley by disconecting the line output stage/unplug scan coils for example and run a 60w bulb as a dummy load one wire to earth and the other to rail voltage colecter of line output transister if the bulb glows steady the power supplys fine

Jun 25, 2007 | Philips 27PT81S 27" TV

2 Answers

Progressive power up problem


Yeppers. Sounds like the standby power supply has a bad capacitor in it and the regulator Ic is defective. These parts should only be replaced by quilified technician as there is very high voltage inside these sets. Good Luck

Jun 14, 2006 | JVC AV-K29MX1U 29" TV

15 Answers

Tv won't stay on


My tv is a Toshiba. It comes on for a second and then goes off by itself. I use the remote and the power button on tv and the same thing happens. Is there a solution to this?

Jan 24, 2006 | RCA F27450 27" TV

Not finding what you are looking for?
Toshiba 28N33 28" TV Logo

662 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Standard (CRT) Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

 Elex
Elex

Level 2 Expert

49 Answers

Cindy Wells

Level 3 Expert

4755 Answers

Are you a Toshiba Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...