My printer's status light is on and the drum light (i just replaced drum). When I press print, the drum light goes off and the paper light starts flashing. There is no paper jam and I don't know what to do!!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Whilst the printer is turned off, press and hold the GO button as you plug the printer on to the socket. Notice that all lights on the printer will turn on as well. Continue pressing the go button until the light for the toner goes up and once its up, release the button. Next, hold down the Go button again until the "Yellow Status" light turns on once on, release the Go button. Wait for the printer to initialize and see if the error went away.
I have reused the drum for three life cycles and the print quality is still good. Just reset the counter until the print quality suffers because the cost of the drum exceeds the price of a new printer. According to Brother to reset the counter
Turn the printer off.
Press and hold the Go button on the front of the printer, at the same time turn the printer power on.
When the Toner light is on by itself, release the Go button.
Push and hold the Go button again, release the Go button when the Paper light is on by itself.