Question about Canon EOS Rebel G 35mm SLR Camera

1 Answer

Message- Bulb. While shooting in manual setting in dark the message bulb comes on. What does that mean? It's random. Sometimes it's on sometimes not. Same location, same light. Errrrrrr.

Posted by on

  • Suzlestage Feb 20, 2008

    Thanks, I did some more poking around and I think I'm going to have to use a remote and hold the shutter open longer. It just didn't make sense that it would take a photo with the settings that I had used and then the next second not. No settings or location had changed, I had just zoomed in or out a bit.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

Sounds like it means not enough light.

Posted on Feb 20, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 2004 Mitsubishi endeavor dim lights won't work brights do

If both low beams don't work, check for a low-beam fuse. Sometimes they hide them under the hood. If it's just one low beam, it may be the plug on the bulb or wiring to the bulb, even a bad ground wire to the bad bulb. Look for crispy wires or dark bulb terminals. Sometimes the terminals or plug will have green stuff on it, similar to what you find on the (+) terminal of the battery. They sell bulb terminal grease to help prevent this. Toodles.

Jan 25, 2017 | Mitsubishi Cars & Trucks

1 Answer

2011dodge avenger lux q i have a message saying my left rear turn signal is out,it flashes fast but it works fine.It only does it when my headlights are on. the message doesnt appear when they are off

Hi,have you replaced the bulb as sometimes the bulb might be working but it still might be faulty and the car manidgement system might still be picking it up,best of luck.

Apr 12, 2015 | Cars & Trucks

2 Answers

Why still no inner light on fridge working, ck'd door switch - not that as lower bulb comes on

If you know how to replace a light bulp, and you did buy the correct one, it should work fine. Sometimes the contacts in the socket or lamp holder don't make contact with the lamp. Look and eventually bent one or both contacts a bit.
Before you try to look in the socket, unplug the mains. I know it will be dark, but on the end of the day you will live and if you check the contacts when the mains is connected, you could touch a contact or you could make a shortage, costing you an extra way to the circuit breaker.
If you have a multimeter, put it on Ohm, and check the "new" lamp, if it isn't defect. The Ohm meter should give a reading.
If both the old and the new lamp are not defect, cheek the wiring in the fridge.

Jul 11, 2014 | Kenmore 56612 Side by Side Refrigerator

1 Answer

Headlight bulb holder is loose in housing, headlight goes out, 2002 avalon

if you have alot things on keychain ignition could be going bad. shake switch when it happens. sometimes remove weight from keys can stop it

Sep 09, 2017 | 2002 Toyota Avalon

1 Answer

Sometimes pictures are dark even in auto mode, err message is always coming, dark image in the view finder.

Hi dear pmorala
1) check
the lens if to drive the diaphragm actuating lever that opens.
2) also check the aperture lever on the camera body may be broken or bent.
3) look at the Shutter release the mirror and shoot the camera in a low speed (M mode) note if this works correctly or some of the leaves that make up the curtain is loose or out of place.

Everything seems fine ... OK command dial to select the full aperture, shoots the camera at you and see the diaphragm (set M mode and speed sh bellow 1 / 8). Full closed? = Aperture Mechanism defective.


Mar 16, 2011 | Nikon D90 Digital Camera with 18-105mm...

1 Answer

My xc70 Volvo shows a message "bulb failure

"position light" is a rear parking light which has failed or become unseated. Sometimes you can knock on the tail light housing and they will come back on, but they burn out shortly after regardless.

These and the low beam headlamps fail very frequently on these cars so you should become familiar with the replacement procedures.

Check the online manual:

Mar 05, 2011 | 2004 Volvo XC70

1 Answer

Bulb failures with no real pattern

check the front and rear turn signal and brake bulbs ,check for filament wear or drakness in bulb glass.if this is found replace bulb,you may also have a bad ground to a bulb socket, turn lights on (signal and break) and wiggle wires at bulb socket, watch light, if it dim any replace that socket and check the ground wire.

Mar 04, 2010 | 1989 Jaguar Vanden Plas

1 Answer

Random RH blinker issues, sometimes normal, sometimes really fast

If a dual element bulb develops a condition where both filaments touch together even momentarily will produce a fast flash too. Replace the offending bulb.

Jul 28, 2017 | 1997 Toyota Camry

Not finding what you are looking for?
Canon EOS Rebel G 35mm SLR Camera Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Photography Experts

old marine
old marine

Level 3 Expert

2179 Answers


Level 3 Expert

538 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Canon Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides