Question about Televison & Video

1 Answer

I have a KROSS TS-5188 DVDR [RECORDER/PLAYER] and i have the firmware upgrade for it [which you tell me i have to burn it onto a cd/dvd and boot the KROSS with it but ive tried that and no good as i think the upgrade file is no good [it has an extension which is a .cub file] Is there anyway out of this problem? thanks BRUCE HANCOCK

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 212 Answers

Hi,
I'm not massively familiar with your machine but I can offer a few suggestions.
The following link will take you to a couple of firmware downloads (towards the bottom of the page).

http://home.exetel.com.au/billscomputers/

Pick one and download it.
When you burn it to disk there are a couple of things to consider;
a. Is the disc compatible with the Kross (CD-R, CD-RW, DVD+R, DVD+RW, DVD-Audio, DVD-R, DVD-RAM, DVD-RW)?
b. Ensure, when burning, that you 'close the session' on the disc. That is to say untick any box that says something like 'allow further writing to disc'.
Regards,
Zahc

Posted on Feb 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Upgrade BD30 wi-fi


To upgrade the firmware you will need to download the newest firmware from this site: http://panasonic.jp/support/global/cs/bd/download/bd30/index.html and burn it onto a cd. If you can't or don't want to burn the cd it looks like they will can send a copy of it to you.

Mar 02, 2012 | Panasonic DMP-BD30K Blu-Ray Player

Tip

Firmware update and power supply circuit


Firmware Upgrading
Note: Upgrading the firmware will restore all the user settings to default.
Preparation to upgrade firmware
1. Download the software update from ww.philips.com
2. Unzip the zip-archive file
3. Start the CD Burning software and create a new CD project (data disc) with the following settings: Character set: ISO9660, Joliet
Format: Mode 1
Recording mode: NO MULTISESSION,
SINGLE SESSION (TRACK-AT-ONCE),
FINALIZED CD (CD Close)
Recommended applications: Neo Burning, Easy CD Creator
4. Place the content of the zip-archive into the root directory of the new CD project.
5. Burn the data onto a blank CD-R or CD-RW....................................
Find your product using search tab on the page......
Electronics Equipment Repair Center

on Feb 14, 2015 | Philips BDP7100 Blu-Ray Player

Tip

DVDR-3380 Firmware Upgrade to v3.27 with DivX 6 and T/C Fixes


This is one of mine posted on VideoHelp way back on the 23rd Feb 2008

http://www.videohelp.com/forum/archive/dvdr-3380-firmware-upgrade-t346638.html

I will include the CD-R ISO image for download soon if you have any problems with the above link

on Jan 17, 2010 | Philips DVDR3380/05 DVD Recorder

1 Answer

Got the error code upd ng on my DMP-BD60.....tried to upgrade firmware


Were you upgrading it over the network from the player? If you had network problems you can also download it to your computer nd burn it to a CD. then insert the CD into your player. Here is the link to the download: http://www2.panasonic.com/consumer-electronics/support/Video/Blu-ray-Disc-Players/Drivers-Downloads/model.DMP-BD60K.D#ts

Sep 15, 2010 | Panasonic DMP-BD60K Blu-ray/DVD Player

4 Answers

The DVD recorder would no boot up


Hello Ken,

Here are the things that you need to do to isolate the problem:

1. Make sure that there's no disk inside the recorder.
2. Turn off the power from the unit (not using the remote).
3. Unplug the DVD from the wall / power outlet.
4. While being unplug, hold down the power button for 30 seconds and plug it back in while still holding down the power button and then release it.

If that will not do any help, change the C18 and C36 (both 2200uf at 10v). the C18 and C36 are on the power supply and most of the time, they are Green.

Have a great day!

Apr 30, 2009 | LG Electronics LRM-519 Digital Media...

4 Answers

Blue ray player wont play blue ray ''Kung Fu Panda'' disc.


i fixed this exactly as previous posted solutions, however a couple of points.
a) recordable CDs work if you don't have a DVD burner.
b) I didn't have a CD burner that would do an "image burn", I downloaded a free copy of "Express Burn" and that worked fine. The disk needs to be "finalised" or "fixated", it should do this automatically, or it may be a tick box selection.
c) I got a "No DWLD 09" when I put the disk into the player. I found this was an incompatibility with the CD-R (Maxwell) I was using. I changed to JVC and it worked fine.

Nov 22, 2008 | Sony BDP-S300 Blu-Ray Disc Player

2 Answers

Dvdr 3455H/97 hard disk unable to reboot


from krystle i am an electronic tec:
what i have found the big difference between the philips dvdr3455h and the dvdr3575h is the
dvdr3455h boot from software on the hard drive and the dvdr3575h boot from an eprom.
the dvdr3455 has both booth software and movie edit software, if the hard drive become
bad in the 3455 or the software become corrupted it wil hang at the philips logo screen.
the dvdr3575h will boot with a bad hard drive or no hard drive at all you will you wont be able to
capture your video to the hard drive.
if the movie edit software become corrupt or damage when you press record button
it will just lock up the recorder.you will need a software reload if the software become corrupt.

if you need a reload on your hard drie email me i will tell you what you need to do my email is krystle913@yahoo.com

Nov 15, 2008 | Philips DVDR3455H/37B

1 Answer

Firmwae upgrade & dvd's don't play on other players


You can download the firmware and burn it to a CD, not a DVD. I don't know what burning software you are using put with Nero you would choose to burn it as an ISO, This is standardized way of burning identical images of CD/DVD. You should be able to then put the burned CD with the updated firmware into the unit and it should automatically update. You can watch the TV screen and see if it prompts you for any info but I do not believe that it will. Good Luck.

Mar 24, 2008 | Lite On LVC-9016G DVD Recorder/VCR

1 Answer

TS-H492A/RSWN CD-RW/DVD-ROM Burner


could be your player is very choosy with the kind of brand you are using. try using other dvd recordable disk brand. to burn a dvd you will be needing a special writing software for dvd. you cannot use a dvd if you just want to burn a cd. you should only use a recordable cd.

Jan 12, 2008 | Samsung TS-H492A/RSWN CD-RW/DVD-ROM...

1 Answer

Samsung DVDR 120 SYS ERROR


You have an early unit and need to install the firmware upgrade. Download it from Samsung and burn to a CD. Insert the CD in the DVD player and the upgrade will be performed.

Dec 02, 2007 | Samsung DVDR120 DVD Recorder

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73591 Answers

Cindy Wells

Level 3 Expert

5052 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...