Question about Routers

1 Answer

Automatically ping and trace disabled after PBR

We have three isp connected cisco 1841 router
we have configured route-map and policy
isp1 source ip use isp1 gateway
isp2 source ip use isp2 gateway
isp3 source ip use isp3 gateway

configuration as follows
ip access-list extended isp1
permit ip X.X.X.X 0.0.0.15 any
ip access-list extended isp2
permit ip X.X.X.X 0.0.0.15 any
ip access-list extended isp3
permit ip X.X.X.X 0.0.0.15 any
where x = isp ip subnet according isp ip
route-map test permit 10
match ip address isp1
set ip next-hop x.x.x.x (next hop of isp1 IP)
route-map test permit 20
match ip address isp2
set ip next-hop x.x.x.x (next hop of isp2 IP)
route-map test permit 30
match ip address isp3
set ip next-hop x.x.x.x (next hop of isp3 IP)
on interface
ip policy route-map test

after adding the above configuration am not able ping any of the public
on interface
ip policy route-map test

after adding the above configuration am not able ping any of the public IPs from same router and my isp are also telling they were not able to ping our IP
But am adding a default route on the router am able ping any IPs from the same router (0.0.0.0 0.0.0.0 isp1 gateway or isp2 or isp3 )
please give the solution for this i can't give default route on the router because my policy ISP1 want use ISP1 one likewise
sathya
!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Please add me on yahoo messenger or mail me , let me know when ur online , my id is samrat101@yahoo.com and we will be able to resolve it sooner,,, mails takes time.

Samrat

Posted on Mar 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cisco 861 behind Wimax Router from ISP


> WAN IP: 44.55.66.777
> ISP Router LAN IP: 111.222.333.174
> Cisco Router WAN IP: 111.222.333.175

Really? Each "octet" must be a value between 0 and 255, inclusive. A value such as '777' is not valid

Aug 27, 2012 | Cisco 861 Router

3 Answers

Cisco router 1841 connected to serial interface


Make sure you set up correctly the subnet mask.

Jul 29, 2008 | Cisco (1841) Router (cisco1841)

2 Answers

Client can not surf or ping specific web address - Cisco router


I am not sure but I believe the IP address is not correct. The trace goes to the following address:

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Tracing route to 200-100-1-5.dsl.telesp.net.br [200.100.1.5]

on my machine. This is only a service provider I believe and not an end website. Have you checked and verified the ip address with the contact organization? Just because you can run a trace route on an ip address does not make accessible.

The cisco could also be blocking the outbound connection at your end.

Hope this helps.

Feb 11, 2010 | Cisco 877 ADSL Security Router

1 Answer

Router not responding to http request


possible firewall on the router check settings make sure its not blocking ping requests everything else works?

Jun 05, 2009 | Cisco (1841) Router (cisco1841)

1 Answer

Cicso router 1841 not connecting to the internet


When using Public IP addresses on one interface, usually facing your ISP, and using Private IP addresses (AKA RFC 1918) on another interface, usually facing your LAN, one needs to utilize network address translation (NAT) in order to connect LAN computing resources to the Internet.
Cisco has a fantastic article on how to perform the necessary procedures on their web site.
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a0080093f8e.shtml

Sep 06, 2008 | Cisco (1841) Router (cisco1841)

1 Answer

Route-map policy block the ICMP


honestly, I dont think anyone here will know how to handle this problem. Try to show this problem to a trained professional.

Feb 18, 2008 | Routers

1 Answer

How remove blocked icmp automatically


type a "no" before the command of blocking command
e.g:if you want to cancel ip address10.10.10.10
you must type no ip address 10.10.10.10

Feb 18, 2008 | Routers

1 Answer

ICMP blocked automatically


return, cut this configuration, but put route the her isp´s.

You can ping after this?

Can´t ping you has other problem.

Good luck!

Feb 18, 2008 | Routers

1 Answer

Routing configuration


Contact an ISP for an IP address.
configure the computers in the 2 networks to have the IP address you got from your ISP as the default gateway..

Cheers

Jan 09, 2008 | D-Link DI 514 Wireless Router (DI-514)

Not finding what you are looking for?
Routers Logo

Related Topics:

297 people viewed this question

Ask a Question

Usually answered in minutes!

Top Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Mike

Level 3 Expert

4331 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...