Question about Tally T9114 Laser Printer

1 Answer

Printing rubbish. The printer works fine all day, then for no reason the data light will flash slowly and the printer will print a page with black blocks acorss the top and stop printing. I have to turn it off for 5 mins, then clear the print queue and the its ok for the rest of the day, but this is getting anoying.

Posted by on

  • discoball Feb 20, 2008

    Should have mentioned that i have allready reinstalled the drivers. This printer prints the same invoices all day. just once or twice it it will do this. I dont have a manual and cant find one on the net. I think the slow flahing data light is trying to give me a clue, as if it starts flashing slowly it allways prints the black boxes.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 729 Answers

Hello,

Try reinstalling the driver to refresh the damaged or virus-infected or corrupt file.

Post me back the progress...

Don't forger to rate. Thanks!

Posted on Feb 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is the light flashing on the right side


If the light flashing is the "light bulb like button" or the "Ready/Light" button, it means that either the printer is:

• The printer is busy receiving and processing data or printing.
• The printer is printing a directory, font list, menu settings pages, or Print Quality Test Pages.


If it's Busy:
• Wait for the message to clear.
• Press and release Cancel to cancel the print job.
• Press and hold Cancel to reset the printer.


If it's printing a directory, a font list, menu settings pages, or Print Quality Test Pages:
• Wait for the pages to print. The Busy message is displayed as the pages print. The Ready light is on when the
printing stops.
• Press and release Cancel to cancel printing.
• Press and hold Cancel to reset the printer.

Jul 31, 2012 | Lexmark E250dn Laser Printer

1 Answer

Can not print in duplex mode I can not print


Why don't you just print the data on the one side of the page and then simply turn the page over and reinsert it into the paper feeder and then print the next bit of data, therfore you end up with both sides of the page printed without worrying about printer commands that seem to fail.

Feb 12, 2011 | HP cp1700 Color Inkjet Printer

1 Answer

Printer crashes


Hi Ann,

Check the ribbon cable that comes out of the back of the print carriage for damage / disconnection. They don't normally wear loose, but it is possible.Failing that, the print engine could have failed, which would deliver duff data to the heads, thus printing rubbish onto the page.

Mar 05, 2009 | HP DeskJet 670c InkJet Printer

1 Answer

HP LaserJet 4 Printer stopped printing


Try putting a piece of paper in tray 1

Feb 26, 2009 | HP LaserJet 4 plus Printer

1 Answer

Brother HL2070N printed 1 page fine,then nothing but light streak


turn off printer, remove cartridge and drum and clean internally.
reinstall drum and cartridge and do a test print, hopefully all will be better.

Jan 18, 2009 | Brother HL-2070N Laser Printer

5 Answers

Kodak EasyShare 5100 won't print


I have had the same frustrating problem.
I cntacted the Kodak live web chat help line and after removing the print head,switching the machine off for 1 min and reconnecting.Clean heads and recalibrate.
.....Still the same.
They then told me the print head was faulty and to contact Kodak for free repalcement.

Sep 15, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Samsung clp 510


usually happens when the NIC card goes bad, may need to replace.

first try resetting the printer, look in your manual

Aug 25, 2008 | Samsung CLP-510 Laser Printer

1 Answer

Won't print - just flashes it's lights at me!


I tried what phrek said (" Pressing the flashing buttons simultaneously, evokes the printer to spit out an internal diagnostic page ..."), but after the diagnostic page printed out the printer worked fine again.

Thanks for the help, and hopefully things work out for the rest of you as well.

Aug 06, 2008 | HP PSC 1510 All-In-One InkJet Printer

1 Answer

Not printing


hi sand;
you may try cleaning the copper in your cartridge with tissue paper and also the pins in the printer but do it slowly, and see if it works
thanks

Jun 05, 2008 | Canon PIXMA MP160 All-In-One InkJet...

Not finding what you are looking for?
Tally T9114 Laser Printer Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tally Office Equipment & Supplies Experts

Toby
Toby

Level 1 Expert

34 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Tony

Level 3 Expert

2598 Answers

Are you a Tally Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...