Question about McCulloch Garden

1 Answer

Need diagram for Mccullogh Mac 4600 Chainsaw carburetor showing fuel line hook ups

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,220 Answers

Duplicate post - please refer to the other post; there may clarifications appearing there that do not appear here.

This is an example of a typical fuel system with a few suggestions:
http://www.fixya.com/support/r3706813-2_cycle_fuel_system_repair

Your basic model number is 600465. I only saw 11- prefixes used with 600465s, no promises I did not miss any. There are a few different suffixes with the 600465s. I think the suffix is on your saw immediately after the basic model number somewhere (On older Macs it is usually on the bottom along with the serial number. The dash of the serial is often the correct prefix). I must defer to you to find your exact IPL, here:
McCulloch IPLs
http://www.ordertree.com/modelinfo/McCulloch/139.59.htm


I chose "11-600465-09" as an IPL example:
http://www.ordertree.com/modelinfo/MCC/11-600465-09-MAC-4600-10%2F94-to-Current-IPL-211594/139.11-600465-09-MAC-4600-10%2F94-to-Current-IPL-211594.1.59.1.html

I find these helpful when getting into an area of repair I am unfamiliar with. Also all components are displayed and part numbers listed.

If you find different size hose a small sample of each taken to a local saw outlet should provide something suitable. Please ask how long they feel any replacement should be (usually 12" ample). HTH
Lou
If you have additional questions you can reply below and I will assist you further
Duplicate answer

Posted on Feb 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuel lines rotted off of my McCulloch 4600 chain saw


Go to: http://www.drystacked.com for a 12 page article on Walbro brand carburetor theory and troubleshooting. Hope this helps!

May 18, 2010 | McCulloch Garden

1 Answer

Mccullough mac 4600 chainsaw gas line connections


This is an example of a typical fuel system with a few suggestions:
http://www.fixya.com/support/r3706813-2_cycle_fuel_system_repair

Your basic model number is 600465. I only saw 11- prefixes used with 600465s, no promises I did not miss any. There are a few different suffixes with the 600465s. I think the suffix is on your saw immediately after the basic model number somewhere (On older Macs it is usually on the bottom along with the serial number. The dash of the serial is often the correct prefix). I must defer to you to find your exact IPL, here:
McCulloch IPLs
http://www.ordertree.com/modelinfo/McCulloch/139.59.htm


I chose "11-600465-09" as an IPL example:
http://www.ordertree.com/modelinfo/MCC/11-600465-09-MAC-4600-10%2F94-to-Current-IPL-211594/139.11-600465-09-MAC-4600-10%2F94-to-Current-IPL-211594.1.59.1.html

I find these helpful when getting into an area of repair I am unfamiliar with. Also all components are displayed and part numbers listed.

If you find different size hose a small sample of each taken to a local saw outlet should provide something suitable. Please ask how long they feel any replacement should be (usually 12" ample). HTH
Lou
If you have additional questions you can reply below and I will assist you further.

Feb 03, 2010 | McCulloch Garden

3 Answers

McCulloch,Mac 3200 Chainsaw fuel lines...........


retgmdI need the same, did you ever find one?

Aug 23, 2009 | McCulloch Garden

1 Answer

Cant figure out where fuel lines go on mccullogh chain saw


Fuel lines: one comes from the tank...has a filter in side the tank...runs up to the intake of the carb... you can tell by hooking up the lines to the carb, and put one into a gas supply... press the prime bulb... if it pulls gas, thats the one to hook into the tank...if not it 's the other... there should only be two lines a fuel supply and a return pressure line. Clean the air filter while you've got it apart....
k

Jul 01, 2009 | McCulloch 26cc Gas Blower Mcb3208

1 Answer

Mcculloch 4600 chainsaw fuel line routing


Shouldn't be that hard to do. Possible paths 1) Run hose from tank fitting to Carb fitting. 2) Run hose from tank to shut-off vale to Carb 3) Run hose from tank to shut-off to prime to carb 4) run hose from tank to shut-off to prime to filter to carb. Omit any item not on your saw.

Jun 12, 2009 | McCulloch Garden

2 Answers

Fuel hose routing problem on a Mac 3516 Chainsaw


chainsaw fuel line routing for my mac 3516

May 20, 2009 | Garden

1 Answer

Homelite XL2 Auto - Proper Oil Line Hookup


Go to m-and-d.com then parts diagram, then illustrated parts online, then parts look up then select oem type select homelite then type in the model no. The parts diagram should show correct hook up.

Apr 06, 2009 | Homelite Consumer Products 9.0 Amp, 14 In....

2 Answers

Which fuel lines conncets to the carburetor?


Well I finally got my saw running - it occured to me that my older chainsaw never had a primer bulb - so I bypassed it and...pull started it with the choke on till it chugged - then turned the choke off and held the gas full on - pulled the starter cord and was cutting trees - LOL

I did speak with a small engine guy - he explained that the primer is to pressurize the gas tank - so your return line from the carb goes to the suction side of the primer bulb - output to the tank - and pickup line with filter goes to the intake of the carb - FYI - hope it helps ya!!!!!!!!!!

Mar 18, 2009 | Garden

3 Answers

Need diagram for fuel lines on craftsman chainsaw


There is two sizes of line. I see the large one goes to the large port on the primer button and then to the fuel tank. The small one goes from the primer button to the carb. The problem is there are two hose connections on the carb. I believe one is a vent, but I am not sure what one it is. I have a 36cc 2-cycle model 358.352161

Feb 27, 2009 | Poulan Pro 42CC 2 Cycle Chainsaw, 18"

3 Answers

How to replace the Husqvarna chainsaw fuel line.


let me knoe the model number and i'll see what i have....

Oct 29, 2008 | Garden

Not finding what you are looking for?
Garden Logo

Related Topics:

910 people viewed this question

Ask a Question

Usually answered in minutes!

Top McCulloch Garden Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

roeb

Level 2 Expert

263 Answers

Are you a McCulloch Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...