Question about Samsung PCL5415RB 54" Rear Projection Television

2 Answers

Bad convergance, blurry

All of a sudden, the picture on my tv turned very blurry. The colors are not aligned. There is a triple shadow on everything. You can see a lot of green on the shadow.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 395 Answers

The convergance amplifiers have failed and need to be replaced. there also may be resistors that have failed also. this is the most common failer in projection tvs. the cost of the repair may be $350.00 depending on the tech you get.

Posted on Feb 20, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 301 Answers

You are having a convergence fail. would need to replace the STK convergence ICs. they are probably going to be STK392-040 and there are 2 of them. you would also need to check all the pico fuses around the area.

Posted on Feb 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My tv on the right of the screen is blurry,with green around the images.


Ur tv have a problems known as a convergence picture problems,it is dead.The tv have R,G,B colors lines mis alignments,tv have colors shadows pictures or 3D pictures look alike?Yes,than the tv have a dead tv convergence board.The tv convergence board must require changes 2 STK convergence ICS and some or all of it resistors too.After the tv convergence board is fixed,the tv convergence picture problems will be solved.The tv shop,will cost u like $300-350 for parts and labors.

Apr 26, 2011 | Hitachi 53UDX10B 53" Rear Projection...

3 Answers

Blurry picture images shadowed


Your filter capicators are proberally damaged, get a technician to have a look ate them, alsoe you might want to try your image adjustment.

Jan 23, 2008 | Hitachi 50UX57B 50" Rear Projection...

1 Answer

I have a Hitachi 53UWX10BA tv. The picture colors are off and blurry. I ran magic focus and it showed a 4 on the bottom of the screen


Ur tv have a problems known as a convergence problems,it dead.Tv have corlors R,G,B lines mis alignments,have colors shadows picture or 3D picture look alike?Yes.The tv convergence board is dead.The convergence board must change 2 STK convergence ICS and some or all of it resistors to fix the convergence board to solved the tv convergence picture problems.The shop will cost u like $300-350 for parts and labors.

Feb 28, 2011 | Hitachi Projection Televisions

1 Answer

There is a blue shadow (especially around on screen graphics, lettering etc.) when in HD mode. I attempted to align the colors through the color convergence but the blue alignment did not work. I also...


No.This tv have a convergence problems,it dead.The tv have R,G,B colors lines mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergence board,must be repaired by repacling 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board,to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Feb 14, 2011 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

Left and right sides, seeing triples in three colors,but the center is fine?


This tv have a problems known as a convergence problems,it dead.The tv have colors lines R,G,B mis alignment,have picture colors shadows or 3D picture look alike.The tv convergence board have dead 2 STK convergence ICS and some or all it resistors.These parts must be replaced on the tv convergence board to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Nov 08, 2010 | Mitsubishi WS-55315 55" Rear Projection...

1 Answer

The picture bends at the top and the bottom of the screen and is blurry where it bends at


The tv have a problems known as a convergence problems,it dead.Tv have colors R,G,B lines mis alignment,have colors shadows pictures or 3D pictures look alike.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts on tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Oct 28, 2010 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

MY TV WENT BLURRY AND DOUBLE..WHAT SHOULD I DO?


The tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignment,have colors shadows pictures or look like 3D pictures.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts on the tv convergence board,must require replacing,to solved the tv convergence picture problems.The shop,will cost u like $300-350 for parts and labors.

Oct 21, 2010 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Shadow effect on picture. Picture is fine but there is a red shadow tint to everything (basically everything is written twice, but not in the same spot)


Tv have a problems known as a convergence problems,it dead.The tv colors lines R,G,B mis alignment,have colors shadows pictures or 3D pictures look like.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts,must be replaced on the tv convergence board to solved the tv picture convergence problems.The shop,will cost u $300-350 for parts and labors.

Oct 19, 2010 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Magic focus blue is fine, green and red are really blurry, tv picture is almost black and white. all bulbs are on.


Tv have a problems known as a convergence problems,it dead.Any colors lines R,G,B mis alignment,have colors shadows pictures or 3D pictures.The tv convergence board,the 2 STK convergence ICS and some or all it resistors are dead.These parts,must be replaced on the convergence board,to solved the convergence problems.The shop,will cost u $300-350 for parts and labors.

Sep 13, 2010 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

Sony rear projestion TV has blurry picture.


sounds as if your convergence needs to be set. either through the menu on the tv or remote you need to get to the convergence set screen and you need to line up the crosshairs. this usually happens when the tv is moved or bumped.

Dec 31, 2008 | Projection Televisions

Not finding what you are looking for?
Samsung PCL5415RB 54" Rear Projection Television Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

Donald Griswold
Donald Griswold

Level 1 Expert

8 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Samsung Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...