Question about Canon PIXMA MP600 all-In-One InkJet Printer

2 Answers

CD-R Tray rejected

Turned on the machine yesterday and instructions in Japanese came up. Reset language back to English but now I can't print on CDs or DVDs: tray keeps getting rejected. Happened once b4 and service provider said they had to reset counter code from European to Australian Standards. Not getting any help on what to do from them, and they said problem not covered by warranty. Canon technical support also have no solution. Need help please...

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If you have a large image say from a 5 mega pixel camera or use a large image as background the printer will reject the tray. There is nothing in the help file about this but I found it by trial and error. Crop or reduce the size of your image before importing it into the Canon print disk software.
When ready to print don't insert the tray until it asks for it.
This worked for me.

Posted on Feb 29, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,351 Answers

Go to this site: http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=116&modelid=13800#SupportDetailAct
Under Please enter your question: type in this.
How to change counter code to english Click Search.
Follow the instruction.
Enjoy!
please vote.....

Posted on Feb 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I did a reset on my 7210 officejet all in one. And now the display language are in a foreign language (i think japanese). Now how do i change the language back to english? Maybe you can instruct me a...


1. Press SETUP 2. Press 7 and then press 1 This select Preferences and then select Set Language & Country/Region Scroll through to English using the right arrow key > 3.Press OK 4.When prompted press 1 for yes. The country/region for the selected language appear. Press right arrow key > to scroll through the list 5. Use the keypad to enter the two digit number for the appropriate country/region. 6. When prompted, press 1 for yes You can print a Self Test Report to confirm the settings 1. Press SETUP 2. Press 2 and then press 6.

Jun 08, 2011 | HP Officejet 7210 All-In-One InkJet...

1 Answer

Not Printing + Different Language on Printer Display


The quickest way to do this is to RESET the printer settings since it would be hard to use the settings on the printer itself since it is in Japanese:

Hold down CANCEL, LEFT (arrow) and POWER UP at the same time.

Hope this helps...

Mar 15, 2010 | HP PSC 1610 All-In-One Printer, Scanner...

1 Answer

It is in Japanese and I want it in English


Dear Sir,

Welcome to Fixya.
Here is the Solution.
It is not problem with catridge.Go to Language setting change language option from japanese to U.S.English.It solves your problem.

Good luck

Oct 07, 2009 | Canon PIXMA MP960 All-In-One InkJet...

2 Answers

Riso GR 375 How to change language


turn machine on .. then press the "8" and the " * " at the same time to enter user mode...

user mode 17 changes language

Mar 10, 2009 | Riso RZ220 Duplicator

5 Answers

Printer Canon MP600 turned Japanese!


There are language settings. Go to the main menu and rotate through to the pliers/screwdriver icon. (settings) Click the right button to select the icon with two sliding tabs. (device settings) Scroll down 4 selections to language selection. Select English.

Dec 17, 2008 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

CD Printing


The CD may be bad. Just go to Canon's web site and download the software.

Nov 29, 2008 | Canon PIXMA MP800R All-In-One InkJet...

1 Answer

Language setting


try to reset the prtiner to defaults

Sep 27, 2008 | Canon PIXMA MP170 All-In-One InkJet...

1 Answer

Epson stylus r1800 problem with printing on cd/dvd


Try this :

Disconnect the printer from the computer.
Turn it off & make sure the CD/DVD tray is closed then turn it back on.

***

Here's generic instruction for you:

If you are receiving an error pertaining to the CD TRAY NOT BEING INSERTED CORRECTLY, please do the following:

Recommendations:
-Don't force the CD/DVD tray into the printer.
-Make sure your printer is powered on, and the output tray is in the upper position.
-Please ensure there is at least 3 inches of space behind the printer, or the CD tray may eject.

Included, are the correct CD/DVD loading instructions. Please follow the instructions below:

CD/DVD LOADING:
1. Ensure the printer is powered on. Remove any paper from the sheet feeder.
2. Push in the paper support extension on the printer, and close the paper support.
3. Push in the output tray extensions, but leave the tray open.
4. Lift the output tray. Place one hand on the top of the printer, and pull up on the output tray until it stops. Lay the tray down in the upper position.
5. Place the CD or DVD into the CD TRAY with the white (or printable) side facing up. Note: To print on small 8cm CDs, please place the small CD ring on the tray first, then place the CD inside the ring.
6. Slide the tray into the tray guides located in the output tray. Push in the guide until the arrow on the tray matches up to the arrow on the tray guide.
7. Press the PAPER button to load the CD/DVD into the printing position. The CD is correctly loaded when the printer's POWER button stops flashing.

General tips for CD and DVD printing:
-Burn data/video/images onto CDs or DVDs before attempting to print on them.
-Do not use thermal-printable or regular CDs or DVDs in the printer.
-Moisture or fingerprints on the printable surface of the CD may cause marks or smearing to appear after printing.
-All printable inkjet media is different. Some surfaces will absorb ink better than others. If output appears banded, faded, or streaky, print a Nozzle Check pattern to confirm that all colors of ink are printing completely. If the ink does not completely dry or smears after 24 hours curing time, you may need to use the Epson Print CD tools to adjust (lower) the print density.
-The only supported resolution for CD/DVD printing is 1440 dpi (aka "Photo")
-Borderless printing and printing on the "inner circle" (plastic around central hole) of CDs is not supported.
-Do not use the "print preview" feature provided by the Epson printer driver as it will only show the image on a blank field and does not offer a clear indicator of where the image will print.
-The Epson Print CD software works best with JPG images and may not import some TIFF images.

Sep 26, 2008 | Epson Stylus Photo R1800 InkJet Printer

1 Answer

Printer reset itself in Japanese


My Canon Mp600 has reset itself in Japanese about 4 times over the last 18months, so I now keep a set of instructions taped to the side of the printer. Switch on the printer and get it to the home setting by pressing the HOME button and press buttons as follows:
1. Press the RIGHT arrow on the central wheel until you get the SETTINGS option (spanner & screwdriver icon). Press OK.
2. Press the RIGHT arrow on the central wheel once to select the slider icon on the right hand side. Press OK.
3. Press the DOWN arrow on the central wheel FOUR times. Press OK.
4. Select ENGLISH from the list of languages. Press OK.
5. Attached these instructions to your printer so you have them to hand next time it goes Japanese!!

Sep 01, 2008 | Canon PIXMA MP600 all-In-One InkJet...

5 Answers

Change LCD screen back to English


Issue: How do I change the language setting of the LCD?
Solution: Change the display language settings (MP170)
LCD Appears in Japanese (or other foreign language) Upon powering on the machine for the first time, the LCD will prompt to select a display language. If a language other than English is selected, the setting can be changed by following these steps.
  1. Ensure the machine is powered on.
  2. Press the <Menu> button as many times as necessary to display [SYSTEM SETTINGS].
    1. From the Copy mode standby screen, press <Menu> 7 times.
    2. From the Scan mode standby screen, press <Menu> 1 time.
    3. From the Memory card mode standby screen, press <Menu> 6 - 12 times.
  3. Use the right arrow twice to select [OTHERS] and then press the <OK> button.
  4. Use the right arrow three times to select [LANGUAGE SETTING] and then press the <OK> button.
  5. Use the right or left arrow to select the appropriate language and then press <OK>. Choose from the following language settings.
    1. JAPANESE
    2. ENGLISH
    3. GERMAN
    4. FRENCH
    5. ITALIAN
    6. SPANISH

Sep 11, 2007 | Canon PIXMA MP830 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA MP600 all-In-One InkJet Printer Logo

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96372 Answers

old marine
old marine

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...