Question about Cross Infoguard Shredder SX102M

2 Answers

Infoguard SX 120D Does not power up. No lights

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

There is a switch on the right side of the shredder itself which has to engage with a tab welded near the top of the basket. Make sure the tab is enagaging the switch. Also check the paper path switch right above the shredder bars.

If you cannot figure this out, please do not pitch the shredder. There a few people here (myself included) that need gears and such from this model. We would gladly pay shipping for such.

Thanks,

John

Posted on Mar 30, 2010

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Me too. I need the first gear (spiral plastic 45 tooth to 7 metal teeth and a couple of the bushings....or you can have my motor for a couple bucks plus shipping.

Posted on Apr 23, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Infoguard shredder SX-102 runs in reverse but not forward


Shredders have a manual switch for reverse..... if you have tried this, then there could be a possibility that the switch has dust of paper in it and the contacts not making contact for the reverse cycle... or the switch is faulty. If you have any electrical knowledge, you can do a test with an ohm meter for continuity in the reverse mode.... or remove the switch and blow it out with an air compressor. If you mess with electrical, ALWAYS REMEMBER TO UNPLUG THE SHREDDER!!!
Good luck.........

Jul 14, 2014 | Achiever CCS5000 Shredder

1 Answer

Need a manual for paragon timer EC 74/120D


Try Googling (paragon)(EC 74/120D)(manual) without parens.

Nov 11, 2013 | Paragon 4001-00 24-hr Timer Control 120v...

1 Answer

I have a sharp carousel microwave model r-120D. It is flashing all 8's like so 88:88 and i cant get it to reset or work at all. Can you help?


usually does this after power outage. reset the clock. go to sharpusa.com and select PRODUCT DOWNLOADS under the CUSTOMER SUPPORT menu...select product not listed in drop down list, then enter R120PK in box....this should be the manual for your microwave

Dec 10, 2010 | Sharp R-120D Microwave Oven

1 Answer

Sx 102m reverse works, and auto does not work


Did you try blowing out the sensor with canned air?

No spare parts are available.

Jun 21, 2009 | Cross Infoguard Shredder SX102M

2 Answers

Infoguard SX100M unit will not shred. Green light comes on.


I have the Infoguard SX100M Axeus, sold by Staples.
Only the reverse was working, UNPLUG and open back cover, the paper mechanical switch was working fine, red side switch, the gears and fuse were all ok, I think something on the circuit board was fried.

Anyways, I switched the BLACK and WHITE wires with each other going to the shredder motor, thus when I switched it to reverse, it would go foward and shred. Its working now, only in reverse.

Jan 10, 2009 | Cross Infoguard Shredder SX102M

1 Answer

Large Metal Gear Wanted


This is how a got my hard to fine gear!

Contact Michael Business Machines for your local dealer 1-800-223-2508

Good luck, Tom

Sep 14, 2008 | Cross Infoguard Shredder SX102M

1 Answer

SX-102M Shredder


The "Head Assembly" IS the shredder. If that part is bad you have DEEEEP trouble. I can tell you though that the primary exchange gear is likely stripped. It is nylon and can't take much abuse. How do I know??? ... 'Cause I have one just like it!!! Let's trade. Maybe we can get one good one out of the two. In the future (as I have carefully explained too my daughter!!!) don't put more than 10 sheets in at a time!!!

By the way... the only part left after the "head assembly" is a waste basket..

Ramah G. Martin (the guy who fixes things)
Glenn@ramahg.com

Mar 31, 2008 | Cross Infoguard Shredder SX102M

3 Answers

Sx-102M


I have the Infoguard SX-100M Axeus, sold by Staples.
Only the reverse was working, UNPLUG and open back cover, the paper mechanical switch was working fine, the gears and fuse was ok, I think something on the circuit board was fried.
I switched the BLACK and WHITE wires with each other going to the shredder motor, thus when I switched it to reverse, it would go foward and shred. Its working now, only in reverse.

Dec 21, 2007 | Cross Infoguard Shredder SX102M

2 Answers

Plastic drive gear from motor broken


I have a left over set of these plastic gears that I can send to you. The motor bracket on mine snapped. I took it apart to check. It looks unrepairable.

edbwest@aol.com

Oct 31, 2007 | Cross Infoguard Shredder SX102M

Not finding what you are looking for?
Cross Infoguard Shredder SX102M Logo

Related Topics:

504 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cross Office Equipment & Supplies Experts

Computer Links

Level 3 Expert

2385 Answers

Ivan
Ivan

Level 1 Expert

34 Answers

Jeremy Mordkoff
Jeremy Mordkoff

Level 1 Expert

4 Answers

Are you a Cross Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...