Question about Creative Labs ZEN Vision:M Digital Media Player

3 Answers

After several reset zen m stuck at no display, completely black but blue led at top is glowing continuosly

Once the screen disply freezes and i have pressed the reset button , then after , display never come back but the power led (blue led) glowing continuosly. Even you press reset button several times its same no change, if i connected to pc it does not recognise. Even if hold the power button and then press reset also does nothing. I need help, please help me

Posted by on

  • 4 more comments 
  • asha0023 Mar 25, 2008

    my creative vision m 60gb got stuck and then ran out of battery. now it doesnt start, reload and neither does it charge.....need help please

  • Galdy Mar 29, 2008

    I have this same problem ...HELP!!!!!!!!!!!!!!!

  • Anonymous Jun 07, 2008

    I have exactly the same problem. Was syncing with my PC and out of a sudden the screen went black; blue led on. I unplugged it, switched it off, screen turned on for a sec, screen went blank and that was it. Afterwards blue led was continuously on, screen off and the player was getting HOTTER AND HOTTER. Had to open it and unplug the battery. After that same symptoms...computer cannot recognize it now, screen is completely black, led is on and doesn't turn off. Please help!!

  • Anonymous Dec 06, 2008

    the sme problem excet the blue light isnt on

  • laurag_14 Dec 22, 2008

    it does not power on

  • horocon88 Jan 09, 2009

    please help

×

Ad

3 Answers

NEED CHARGE

Posted on Mar 30, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Try going to www.creativelabs.com. Click on Support then choose Discussion Forums. They were very helpful when I had problems with my Zen.

Posted on Mar 29, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

Posted on Feb 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Do not my printer initialize & red light glow


LP-365W On Line LED Is Solid Red - samsung product ...

support-us.samsung.com/.../pop_troubleshooting_fr...

Samsung ElectronicsImportant: Before you perform any type of service on your printer that requires you to... Any of these conditions can cause the On Line LED to glow solid red:.

On Line LED Is Solid Red

support-us.samsung.com/.../pop_troubleshooting_fr...

Samsung ElectronicsDec 2, 2014 - Important: Before you perform any type of service on your printer that ...Any of these conditions can cause the On Line LED to glow solid red:.

Samsung ML-3561N Laser Printer Initialize - Questions - Fixya

www.fixya.com > ... > Samsung > ML > Samsung ML-3561N Laser Printer
ML-2570 Samsung printer having problem orange LED is blinking ... initializing stage green LED glows continuosly,After initializing Printer green LED turn into ... the red light remains on when i switch on the printer.. and it doesnt initialize the ...

Samsung glow plug Printers & Copiers Questions ... - Fixya

www.fixya.com > Forum > Tags > glow plug > Printers & Copiers
Printer Problems...red status light glowing I bought a Samsung CLP-310W a ...Samsung printer having problem orange LED is blinking in initializing stage ...

Reset for Samsung ML-1660 ' FixYourOwnPrinter


Dec 19, 2015 | Samsung ML 1610 Laser Printer

1 Answer

Creative Zen screen is frozen on ZEN


If you have tried the reset hole on the bottom, try the mp3 player recovery tool here.

Feb 12, 2009 | Creative Labs Zen Digital Media Player

3 Answers

My Creative Zen started freezing a couple weeks ago. I would press the restart button at the bottom left and that seemed to solve it. Now though, when I turn it on, the Creative Zen welcome screen comes...


It sounds like the hard drive is damaged I have a archos 605 wifi it froze up on me so i turned it off and turned it back on and it wouldn't load pass the archos welcome screen come to find out my hard drive was damaged.Hopfully yours is still under warranty otherwise you'll have to send it in and pay to get it fixed but i would say the hard drive is damaged.

Nov 28, 2008 | Creative Labs Zen Touch MP3 Player

4 Answers

My Creative Zen won't turn on OR off!


I had the same problem today too. I just stuc a needle in the little 'Reset' hole at the bottom and it was all good.

~loli~

Oct 31, 2008 | Creative Labs Zen Digital Media Player

1 Answer

I have a creative zen mp3 player.It won`t charge in my computer but the blue LED is on but the screen is black


i have the same problem i let it die completely, and then i plugged it in and then the screen was black nothing but the blue LED is on but it flashes...please help i just got this a couple of months ago!!!!!!

Sep 21, 2008 | Audio Players & Recorders

1 Answer

My Zen is Really Broken!


http://serviceman.site88.net/index_files/MP3Players.htm

Jun 29, 2008 | Creative Labs Zen V MP3 Player

4 Answers

Dead Creative Zen M


Usually this problem is due to the firmware. When the firmware is updated to version 1.62.02, this problem usually will be corrected. The older firmwares have problems in recognizing the battery and allowing the battery to power the unit.

You will need a wall/AC charger for the operation. Plug in the wall charger and USB cable at the same time. Your Zen should power on when connected to direct AC power via the wall charger. Once it is powered on, connect the USB cable to your computer. Then begin the firmware download.

If your Zen does not power on when connected to the wall charger, your unit is dead and its time to replace it or get the motherboard replaced via one of the Repair services offered on this website.

If the upgrade button on the firmware window is not available, it is also time to replace your motherboard due to corruption of a chip on the board.

Mar 13, 2008 | Creative Labs ZEN Vision:M Digital Media...

1 Answer

Zen m : after reset no logo appears, black screen,


If your Zen V is dead, wont respond to anything, try this, plug it in to the computer, hold the power switch in the on position, THEN trigger the reset button, worked like a charm for mine, I had thought it a lost cause."
try this

or
this

If that doesn't fix it try the USB cable

Feb 19, 2008 | Creative Labs ZEN Vision:M Digital Media...

1 Answer

Zen Vision: M Frozen for good?


. How to reset Zen v +
http://www.youtube.com/watch?v=22T_gkkZjmM&feature=related

Zen Vision:M Not Responding SOLUTION! to No Charge, Device Not Connected or Recognize
http://www.anythingbutipod.com/forum/showthread.php?t=10960
If that doesn't fix it try the USB cable

Jan 15, 2008 | Creative Labs ZEN Vision:M Digital Media...

6 Answers

Creative zen V 1GB


Boy's will be Boy's....
try this
http://www.youtube.com/watch?v=22T_gkkZjmM&feature=related

Dec 08, 2007 | Creative Labs ZEN V Plus MP3 Player

Not finding what you are looking for?
Creative Labs ZEN Vision:M Digital Media Player Logo

Related Topics:

513 people viewed this question

Ask a Question

Usually answered in minutes!

Top Creative Labs Audio Players & Recorders Experts

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

620 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Mohamed Ismail
Mohamed Ismail

Level 3 Expert

462 Answers

Are you a Creative Labs Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...