Question about Canon PowerShot SD110 / IXUS IIs Digital Camera

1 Answer

When i switch on my canon SD1100 camera it read like lens error, restart camera. the lens is out and can't get screw back. plse help cos i got to use this camera on my birthday. its a lens problem and please help me fix it back.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Posted on Sep 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix my camera or can it be fixed at all?


cost will exceed what a new camera would cost probably .

Jun 21, 2015 | Canon PowerShot SD1100 IS Digital Camera

1 Answer

Everytime I power on the camera it says "lens


Go to this website for the solutions:

http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Oct 27, 2011 | Canon PowerShot SD1100 IS Digital Camera

1 Answer

Lens barrel is stuck in the out position on my Canon Powershot SD1100 IS. Error message reads: "Lens error, restart camera". To my knowledge the camera has not been dropped and the barrel seems...


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended ... Here are some troubleshooting steps that you can try that may (or may not) correct it. They only seem to work for less than 40% of the lens errors, but if the camera is out of warranty (or repair cost approaches that of the camera), they're worth that try. Some of the later steps do involve some risk to the camera, so carefully weigh your options before deciding to conduct them:

Jul 20, 2011 | Canon PowerShot SD1100 IS Digital Camera

1 Answer

My cannon sd1100 says to restart it, how do you restart the camera (i lost my book)


"lens error, restart camera". Except restarting (simply turning the camera off, and then back on again) rarely corrects the problem. Here are some troubleshooting steps that you can try that may correct it. They only seem to work for less than 40% of the lens errors, but if the camera is out of warranty (or repair cost approaches that of the camera), they're worth that try. Some of the later steps do involve some risk to the camera, so carefully weigh your options before deciding to conduct them:

Jul 08, 2011 | Canon PowerShot SD1100 IS Digital Camera

1 Answer

Lens error. Restart camera.


this is very common has the camera been near the ocean??? it does not have to be dropped to give you this error. repair on you lens runs 85.00 for repair. or a new lens for 125.00

Jun 25, 2009 | Canon PowerShot SD1100 IS Digital Camera

1 Answer

Lens error, restart camera message


This is probably THE single most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

May 21, 2009 | Canon PowerShot SD1100 IS Digital Camera

1 Answer

Lens error restart camera


same thing just happened to me today. the little girl that I babysit dropped it about 1 foot to the rug on the ground, not a hard drop at all. so i tried taking out the batteries and hit it on the table (read on other sites) then i gently turned the end of the lens (my lens was stuck out) counter clock wise and it clicked and then worked.

Apr 20, 2009 | Canon PowerShot SD1100 IS Digital Camera

1 Answer

Lens error restart camera but it just switches off


I've read many sites and tried to revive my camera of the lens error and after 2 weeks ... the following site gave me the answer

http://www.digitalcamera-hq.com/digital-cameras/canon-powershot-sd600_question.html?qid=8938

Look for user MAMA ... it helped 33 others ... the solution is to turn it on and tap it back in place quickly

Jul 10, 2008 | Canon PowerShot SD1100 IS Digital Camera

Not finding what you are looking for?
Canon PowerShot SD110 / IXUS IIs Digital Camera Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

102366 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

168 Answers

old marine
old marine

Level 3 Expert

1923 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...