My amilo v2010 will not change boot options Help

Go to the link below and select your model and operating system

http://ts.fujitsu.com/support/downloads.html


Please leave feedback

Cheers

Andy

go to the bois by pressing f2 or delete then go to boot seq then sellect 1st boot from cd'dvd rom f10 to save

Just one example,

http://www.laptopjacks.com/view_part/For-Fujitsu-Amilo-Pro-V2010-DC-Power-Jack-FJ41420.html

The power socket in the laptop that the AC adapter (Charger) plugs into is a DC Power Jack.

Type Amilio Pro V2010 DC Power Jack in your browser search bar, press the Enter key.

To add:

http://www.laptoprepair101.com/laptop/2007/12/06/dc-power-jack-repair-guide/

Please make sure to have a wireless router set-up,l because you would use this to connect wirelessly to the internet

EASY WAY use RESTORE or WINDOWS Install CD, each has a re-partion and format utility during install, look at bottom of Install selection window, If you don't want to continue install after format, just power off the system.
Post comment if need other options for formatting.
You have regular PC? It would help if you need to make a floppy.

on the bottom of the laptop is a square plate with 1 or 2 screws, when the laptop is off, remove those screws and you should see your laptop memory, gently expand the two thin metal clips on either side of the memory and it should pop up at an angle, gently remove it and replace with a larger capacty memory module.

to change a Cd drive in a laptop you need to have a pro do it for you because you could break your laptop

To switch on the WLAN automatically at system start, please enter the following BIOS setting:
Open the BIOS Setup Utility by pressing [F2] after switching on the AMILO. Goto menu Advanced and change the option "Default Wireless Setting" to "Wireless LAN". Save changes and exit BIOS.
Now the WLAN adapter is enabled by default.



hope this helpsplease feel free to ask morequestions

Hi Brian,
It's not a problem as u think..
Yes your Ram is 256 M.B // but your Vga Card is built in the mother board with 64 M.B ..so it's share the Vga card Memory from ur basic ram (64 - 256 = 190~192 M.B) .
So u just need to increase ur rams by new one or replace this ur current ram by 2g.byte ram .

best luck.

hey you can download it from here

http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp