Question about Magic Chef 9122 Gas Single Oven

1 Answer

Range won't heat up

I have a Magic chef oven, that will only heat up the oven temp to a luck warm. Had several people tell me it's a thermal coupling. How do I repace one of these, as I can not afford a new stove. It is gas. Thank you

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 80 Answers

It is a glow coil , thermocouples are on units with a free standing pilot that you have to light, if you have a range like this you may need a thermocouple if not a free standing pilot you have a electronic gas iginition system that uses a glow coil, you turn on over setting and oven glows orange then iginites if this is what you have you need new glow coil, easy to repalce

Posted on Feb 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oven Won't Heat To Desired Temp / Burner Quits Working Sometimes


The temperature sensor in the oven needs to be replaced. Here is the part to order. As far as the top element, lift the top up and look for lose or broken wires on the element. Keep me posted.

Nov 20, 2012 | Magic Chef Ovens

1 Answer

We have a Magic Chef gas oven (model # CPL1100BDW) without electronic ignition. The oven isn't working. The oven pilot is out, can't get it to light, and the oven will not light - (obviously)....


Hello & Welcome to FixYa
If the pilot is clean and still won't light then the problem is with the safety valve that won't open and so needs replacement. Please get back to me if you have any other questions.
Kevin

Nov 14, 2011 | Magic Chef Ovens

1 Answer

Oven not heating


If your oven is gas, like it says up top, then your ignitor is bad...
Check out this tip...

http://www.fixya.com/support/r3663023-oven_not_working_or_oven_not_heating

Heatman101

Mar 07, 2010 | Magic Chef 9122 Gas Single Oven

1 Answer

Magic Chef oven displays F3 everytime the bake or broil button is pushed. Not sure what the model # is. Electrical range.


this could be a an open probe or shorted probe connection.you need to check your temp probe harness to your main board.
there is a chance that you need to replace your temp probe.
last thing would be to replace the EOC

Feb 12, 2010 | Magic Chef Ovens

1 Answer

I have a magic chef range/oven. For the last few months, it has taken longer and longer for the oven to heat up to temp. Now it won't get more than 90 degrees or so. What is the problem??


Turn off the power to the range. Remove the bake element from inside the oven. Be careful not to let the wires go back into the oven cavity. Take a volt/ohm meter set for ohms or continuity and test the bake element leads. If you get no reading replace the element. If you do get a reading,replace the temperature sensor in the oven.

Oct 08, 2009 | Magic Chef Ovens

2 Answers

I have a Magic Chef Chateau Gas range. The upper oven does not heat properly. It comes on, but never gets up to operating temps.


you could have a bad ignitor check that it is actually igniting the gas and you can see flame, also check the cavity sensor a probe that sticks into the oven at the top usually on the left top corner but if the bake cycle works with good results them it is ok
check for flame when it starts give it a mibute to ignite, if it does not then you need to replace the broil ignitor.

Sep 19, 2009 | Ovens

1 Answer

Gas smell oven does not light


you may need new coupler on pilot system

Jun 23, 2009 | Magic Chef 9122 Gas Single Oven

1 Answer

Magic chef manual


You can download it here but you need the right model #.
http://shared.whirlpoolcorp.com/product_literature/search.jsp?siteCd=MCF
As for the temp adjust it is best if you get an repair man out to do that.
Good Luck

Dec 18, 2008 | Magic Chef 9522 Electric Double Oven

2 Answers

Magic Chef range


Ignitor is very fragile and may have cracked.

Nov 28, 2007 | Magic Chef 9122 Gas Single Oven

Not finding what you are looking for?
Magic Chef 9122 Gas Single Oven Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magic Chef Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal De

Level 3 Expert

2667 Answers

Oloyede Monsuru

Level 3 Expert

1417 Answers

Are you a Magic Chef Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...