At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: How many grease fitting are on a 2002 chev blazer, 4...
Will very. Alot of the parts on the new cars are sealed and wont have grease fittings but when parts of steering and suspension are replaced then the have grease fitting so honestly it can very from car to car.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
no info generic answer need more info such as engines blazer info etc call a junkyard and ask about the cross reference/comparability and have the additional info available
It sounds like the motor for engaging the 4wd isn't completely engaging, you're going to have to crawl under the truck and watch it while someone engages it. I cannot express enough how dangerous this could be to the person who climbs under the vehicle, take every precaution necessary even as far as lifting the truck up on jack stands on all 4 corners with all wheels off the ground.
certain durangos, have the fittings on the ends of the tie rods, and the ball joints, but it is different for 2 wheel drive and 4 wheel drive models... if you do not see the grease fittings on the ball joints, or the tie rods that means they can not be greased... check the boots on them tho, if there is any tearing, or the boot is missing or broken in any way, that part will need to be taken out and replaced...if the suspension part has no grease fitting in place, this indicates it is sealed and doesn't require periodic lubrication
pull atc 25 amp fuse in underhood fuse center and 10 amp 4wd fuse inside cars fuse box,your problem is in control box behind kick panel on pass. side ,corrosion build up,
After finding a vacuum line that was off from the auto body shop that never was reconnected , after they removed it when they replaced the left side fender from a crash. Reconnected it and now it works. It was hard to find. Due to it is located below some other componets and wires.
I replaced the rotors and pads on my right hand drive Blazer and had the same problem ,dont worry in a couple of days normal running the pressure goes away and you dont get the heat problem. Its just the new pads bedding in.
×