Question about GE PFS22SISSS Stainless Steel French Door Refrigerator

1 Answer

Regarding GE french door model pfs221sbss, need

Regarding GE french door model pfs221sbss, I think I need new board. The digital temp readings no longer display and controls no longer work. Otherwise works fine, with exception of compressor humming. What is the model number of the board I need to get? Only a couple yrs. old.
Thanks VERY much ...

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 128 Answers

I would call your GE service company and give them the model number and serial number of your frig. They can look up which board fits your frig.
I hope this helps.

Posted on Feb 03, 2010

Testimonial: "Will do. Thanks- BW"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No display on temp controls and both frig and freezers are warm. i don't here the motor running at all. this happened after we had a power flash do to weather.


your main board in the back of the unit is bad and needs replacing,if you recently replaced a burned out light bulb in the freezer and now they strobe rapidly this is another good sign its this board the new board is a G.E. # WR55X10942

Aug 22, 2011 | GE PFS22SBSSS Stainless Steel French Door...

1 Answer

I have a PFSS5PJXCSS French door with bottom freezer GE Profile refrigerator. Was making an awful noise and both fridge and freezer were warm. I opened back panel of freezer to find ice everywhere,...


Had similar problem, freezer was working fine, but fridge was warm, (68 degrees) It wasnt my damper, the mother board was fried, and so was the inverter board that told the compressor what to do, after having the inverter and two mother boards replaced.......I threw it out, biggest piece of ****, only three years old, and Sears would not stand behind it, even though I used their repairmen. I will never buy another GE product, or enter a Sears store again

Jun 03, 2011 | GE Profile PDS20SFS Bottom Freezer...

1 Answer

Not working, ER and CO in spots for temp. French


ER CO is an indication of a communication error between the display board and the main board. Has this unit had a board replaced recently? If so, one of the multi pin plugs may have not gotten connected firmly, or an incorrect board may have been installed. The problem has nothing to do with the dust.

Feb 28, 2011 | LG LFX25960ST Stainless Steel French Door...

1 Answer

New ge fridge temp on door does not agree with three different temp gauges i have placed in the fridge. 5 to 10 degree difference?


That will happen easily if the temperature probe/thermistor is covered or located behind something stored near it. The door reading also could be out of calibration. If you have an ice maker the ice maker will not want to work very well above 5 degrees. If you run into major problems or this just started happening and you notice changes in the fresh food compartment goes above 38 degrees then that could be the beginning of a defrost problem. If you should need help let me know, Thanks, Sea Breeze

Nov 22, 2009 | GE PFS22SBSSS Stainless Steel French Door...

1 Answer

New french door GE fridge that won't stay cold


If " new " is less than 1 year , you will need to call GE factory service , for a warranty repair . If any one else works on it , this will void your complete warranty , and they will charge you for a service call + parts + labor .

Nov 13, 2009 | GE Refrigerators

1 Answer

Bottom freezer temperature rises as high as 35 degrees and drops only to a low of 15 degrees continually. ongoing for a month now. french doors fridge now has temp. fluxes within this past week. temp. goes...


check the defrost thermostat , and any temp sensor that can determine the freezer temperature.
If this fridge temperature is electronically controlled, the freezer control board must also be tested.

Click here to get all parts and diagrams for this fridge.


Regards.

Jul 09, 2009 | GE Profile PFS22MBW French Door...

3 Answers

Cannot get the fridge to start cooling


If the panel temperature reads 0 F 0 F it is in the "DEMO" mode. This is normal if you purchase a floor model. To bring it back to normal mode press ENERGY SAVER & ADJUST FREEZER together for 3 to 5 seconds until it beeps. Then unplug the referidgerator for at least 30 seconds. Then plug it bck in. That will reset the stupid computer and get it back to normal operation.
Did you think this was helpful? Yes No

Feb 08, 2009 | General Electric GFSS6KKXSS Stainless...

2 Answers

GE French Door Frig control panel blinking temp #s


I had a very similar problem with our GE refrigerator. The main control board looked to be the culprit. I took out the board and did a visual inspection. Upon inspection I discovered that the (2) 470 micro farad capacitors were blown. I checked the power diode near these and it was still ok. I went to Radio Shack and picked up two 470 micro farad - 35V capacitors for and grand total of $2.60 and resoldered them myself. The refrigerator has been running great since. If you want to know more details email me and I will be happy to let you know what I know. I didn't want to pay $100 for a GE guy to replace a board either!

Feb 07, 2009 | GE Refrigerators

1 Answer

Digital display is blank in GE Profile fridge


Hi. Its either a bad motherboard or control board. I would check the control board for any obvious signs of damage to the board first. I've seen the control board go blank on the GE side by side and it turned out to be the motherboard. The motherboard is located behind a cover on the back of your refrigerator cabinet. You should have a new motherboard on hand at all times because they fail alot. Be sure to put a surge protector on your refrigerator. Good Luck, Mack

Feb 02, 2008 | Refrigerators

1 Answer

GE Arctica Profile getting too cold, temp set to 37 actual temp is 25-35


Wow, so you dropped some money into it, eh? I would take a look at the damper door asslb(DIFFUSER). located at the very top left of your refrigerator section in back. It has a motorized door that opens and close's and it may be stuck open. More than likely it is broken and needs to be replaced. GOODLUCK!!!!

FYI: All your cold air in your refrigerator comes from your freezer!

Dec 17, 2007 | GE Profile PFS22 33" Artica French Door...

Not finding what you are looking for?
GE PFS22SISSS Stainless Steel French Door Refrigerator Logo

321 people viewed this question

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

KJ4QOB

Level 2 Expert

55 Answers

Jim Akins

Level 2 Expert

82 Answers

rodney bartholomew

Level 1 Expert

11 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...