DELL 3100 not printing colours correctly, anything green is coming out pink and yellow is coming out red ? Any help would be appreciated.

Videos and wiring diagrams. There is a full diagram on the Benz forum but no colours.

https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk00wybqfYZro_-F_znQvmsZIrAhF4g%3A1611957805796&ei=LYYUYOnyL5L2tAXI8bzoCA&q=1998+mercedes+benz+c280+ignition+wiring+diagram

..

Please next time put the question in the correct category. I still will try to help you.
If your printer does not tell you any cartridge is empty, and it still does not use that colour it could be the nozzles of one cartridge are blocked. Check this by printing a test page, as told in the user manual. Sometimes called an alignment print.
Then check if all colours appear correct. Looks like yellow is not working correct.

create a doccument with four identical lines of text.
the text should be as follows:
your text in the colour Black, the cyan, then yellow then magentta
see if they print in the colours you used, if they are all wrong then delete all drivers associated with the printer and delete the printer, then follow the install proceedure again to reinstall, if just one colour is wrong the it is most likely a deffective cartridge.

Have you any applications like deep freeze installed on your computer machine? If so uninstall it restart your computer and try to print again. The fact is some programs cause colour malfunction in the computer. The similar scenario I encountered, I had to format the system for the colours to print correctly again. But i have seen where deep freeze cause similar issues before.

Good luck & God bless!

1) Could be your printer settings, check out your printer preferences to make sure your not printing a negative or make sure you colour corrections is enabled.

2) If the colour cartridge is a 3 in 1, just one of the colours may have run out. Giving a distorted picture. That means a new cartridge. The best way to check that is to go to your printer tool box and print out a test sheet. There should be 3 colours (Magenta, Yellow and Blue) and Black. If one's missing, the cartridge is out one colour.

Hello! I'm having a hard time reading your colors...So, I'll give you the 1983 Corona wiring...

POWER

Constant +12= Blue/Yellow Switched +12= Gray
Ground= Brown Antenna= Black/Red
Illumination= Green


SPEAKERS

FR+ Light Green
FR- Blue
FL+ Pink
FL- Purple
RR+ Red
RR- White
RL+ Black
RL- Yellow


Guru...........Saailer


I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

I would try cleaning off the nozles on your print cartridges. If that doesn't help, replace them altogether.

the problem is very simple the magenta ink the cartridge is over or the head is been blocked from where the magenta ink comes out,
because red colour requires ---yellow plus magenta(pink)----to make it red.and ----dark yellow plus magenta(pink) -------- for brown colour.

Breather hole blocked in cartridge. opened up with pin - works ok now.

i think problem could be solved
take out the cartige and the cartige holder , spray them with glass cleaning solution and replace them back