Question about Hotpoint Washing Machines

1 Answer

WMA 54 Hotpoint Aquarius washing machine lights flashing

My WMA 54 Hotpoint Aquarius washing machine gets to a certain point in the cycle and stops the lights then flash in sequence. I cannot get the door open and have tried different cycles but the same thing keeps happening.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

The problem here is the machine is not emptying when its supposed to, you will find it is stopping at the rinse cycles. there is a sump underneath the machine that needs to be emptied. From my experiences, 9 out of 10 hotpoints that i would of repaired with the same problem as you are having is usualy caused by using the color catcher sheets, they are a disaster.

appliancesdav@hotmail.com

pallesappliancerepairs.com

Posted on Feb 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My hotpoint Aquarius has suddenly started being very noisy on the spin cycle. Why is this .


heavy clothes... like jeans and all on 1 side while light clothes (cotton) on the other... causes jerks

Aug 05, 2014 | Hotpoint Washing Machines

1 Answer

Hotpoint Aquarius Extra WMA40 - Prewash light flashing and cycle not completing? The water level also looks to be very high? As tenants this machine has been installed (we suspect second hand) to replace a...


The water level on the Hotpoint WMA range of machine should be below the door, check out the error code definition at this site. You probably have a pressure chamber blockage or partial blockage. There are also workshop manuals for the Hotpoint WMA & WM machines which run through this sort of repair.

Mar 20, 2010 | Hotpoint WMA40 Front Load Washer

2 Answers

Hotpoint aquarius wd440. Flashing lights


press and hold on off button till the display panel lights up.Then press and hold the on/off button and the start /cancel button together.You will now reset the washing machine settings.And just pick your cycle again

Oct 04, 2009 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Hotpoint fault?


Check the drain and circulation hoses for partial blockages as usually this causes such problems. Also make sure you using program with full speed spin cycle (solid spiral sign just before the dot pointing the end of chosen programme)

Mar 01, 2009 | Hotpoint WMA30 Front Load Washer

1 Answer

Washing machine stops mid cycle and lights start flashing


Drain the water by lowering the hose into a bucket or something and then try it on spin, if it spins o/k then you probably have blocked pump or filter.
The filter is located in the large black hose that is fastened to the bottom of the drum, remove and clean.
Hopefully this will solve the problem.
Plz rate this solution.
Thanks.

Dec 17, 2008 | Hotpoint Aquarius WMA42 Front Load Washer

4 Answers

HOTPOINT AQUARIUS WF 250 ON/OFF LIGHTS FLASHING


The lights are set off by the balance sensors.And if your balance sensors are  stopping    it from spinning than you first have to make sure the washer is level.You  could have bad Shocks and a bad electronic control board,.                                    

May 05, 2008 | Hotpoint Aquarius WF000 Front Load Washer

2 Answers

Hotpoint Aquarius WMA 32


please check the outlet hose of the detergent drawer. it could be clogged with soap.

Feb 13, 2008 | Hotpoint WMA32 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

803 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

Todd Arndt
Todd Arndt

Level 3 Expert

2044 Answers

freddyfox

Level 2 Expert

236 Answers

ptpumpman

Level 3 Expert

407 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...