Question about ASUS M2N32-SLI Deluxe/Wireless Edition ATX Motherboard (1254095)

1 Answer

No Beep no screen

Hi My Pc was working fine then suddenly just stopped frozen
re booted now no beep occurs and no screen though my monitor get sosme power from the card.

Tried a new PSU same problem. coudl it be the graphics card causing it not to beep. Also took out the card and powered it up no beep or error signal.
Powerlight is on the board.

Any idea could my processor had blown. if so what probelm would igte if there was no processor. Like some help please

Posted by on

  • 3 more comments 
  • mark simmons Feb 20, 2008

    Hi probelm has changed now the Pc when i power it on it tunrs off after 30 seconds tried new keyboard no difference any ideas

  • mark simmons Mar 01, 2008

    Hi It will not show a screen at all so cannot see the bios
    Just so as to clear things up
    at the monent power light is on motherboard but boot up sequence or beeps

  • mark simmons Mar 14, 2008

    Have now sent motherboard back to ASUS awaiting response

  • mark simmons Apr 02, 2008

    Thanks for the help the motherbaord has a fault and is with ASUS being looked at chgeers

  • Bowfinger May 19, 2008

    Hi, same board w/ 64x2 5000 blk ed.550watt psu, 2 Gbs corsair ddr2-800

    320 Gb sata Hdd. ide dvd-rw.

    first did not post got into bios once, then got 4 beep error-no video, thought card was bad-swapped slots, posted fine, bios detected everything. but could not get optical drive to read install disk(win XP pro- 64 bit) to format new HDD. Is the board bad? or can it be fixed in bios? or flash update- ver 12sumthing. this sucks as the board is a buy off a friend at a much reduced price( he thinks it has IRQ disorders and might be fixable. I've heard great things about this board, and like the oc'ing features and the Nvidia 590 chipset, that and sli. oh yeah the video card is a BFG nvidia 8600 GTS OC. worked all winter shoveling ole peeps driveways to buy the parts, and still have no puter-:-/

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 97 Answers

Sometimes a keyboard failure can cause this try a known good keyboard

Posted on Feb 19, 2008

  • MR R
    MR R Mar 01, 2008

    if it powers off after 30 secs sounds like the bios is not seeing the HD get into the bios see if it can detect the HD

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My pc is booting but no display


Did you check your monitor with other system or individually. If it works fine in these conditions then the issue belongs to your pc.
First of all, you have to confirm that is it the problem of VGA itself or the motherboard. For this, you have to see that does system beep when you start it because system with beeps having the error and the beep sound with continuous or 2-3 beeps relate with different issues. I am going to write down the beep conditions.

1 short beep Normal POST - system is ok 2 short beeps POST Error - error code shown on screen No beep Power supply or system board problem Continuous beep Power supply, system board, or keyboard problem Repeating short beeps Power supply or system board problem 1 long, 1 short beep System board problem 1 long, 2 short beeps Display adapter problem (MDA, CGA) 1 long, 3 short beeps Enhanced Graphics Adapter (EGA) 3 long beeps 3270 keyboard card


best of luck!

Mar 13, 2012 | Gigabyte 7VM333M-RZ (GA-7VM333M-RZ)...

1 Answer

Intel 845 GL mother board no display ;processor memory & SMPS are working fine in another mother board


Does it have any beep sounds on switching on( some computers won't produce beep sound) or does your monitor is not getting any signals from computer even though it is ON and has shown any message or menu screen of Monitor functions then,
You will be having a faulty RAM or your Graphic port has some hardware malfunction.Or it can be also from a new unsupported hardware installation that will prevent computer from booting up.

If your monitor does not provide any of the above monitor functions successfully then
It would be a monitor problem. Check wires or cables of monitors or contact nearby technical support

Sep 06, 2010 | NEC Galileo 845GL (N4-IBFGL) Motherboard

1 Answer

Abit av8 bios post codes 8.3 - 8.6 - 9.c What is failing on boot ? I get one long beep followed by 4 short beeps. I have swapped video cards and reflashed the bios with no help. If I reboot 2 or 3...


I still did not find beep code that match your problem..

Anyways here are the common beep codes for your motherboard.. it might help you too.
1. No beep - no reaction, the mother board is dead, power supply problem, processor and or ram problem.
2. 1beep - board is working fine.
3. One long beep then it shuts down - cpu problem, your processor is not working or missing.
4. 1short beep - system boots normally
5. 2short beeps - CMOS setting error.
6. 1long 1short beep - dram error
7. 1long 2 short beep - video card or monitor not connected
8. 1long 3 short beep - keyboard error.
9. 1long 9short beep - ROM error
10. Long beep - memory card is missing or not connected
11. Short beep - power supply error
12 Four beeps - there is no fan detected on Fan1 or Fan2 header. make sure to attach or reset CMOS bios to factory setting.


Hope this gave you an idea of your problem..

Much appreciated if you rate this help..thanks..

May 23, 2010 | Abit AV8-3rd Eye Motherboard

1 Answer

ASUS P4P2E-X 1 long beep that continue without end


hi,
I think One long beep that continue means RAM problem , Ram Can May be dead or faulty, check on other ram.

I hope that this has been very helpful for you

Nov 14, 2009 | ASUS P4PE2-X Motherboard

1 Answer

Pc used to work fine but now won't boot, post or beep. No sounds at all, just a black screen and monitor lamp stays on orange!


Hi,
Check the mains power supply cable. Try to Connect with another cable. Or, the SMPS power supply unit may be at fault.

Jun 24, 2009 | Biostar P4VMA-M Motherboard

1 Answer

Gigabyte GA-945P-S3 short beep codes on cold boot. Tried reseating RAM, didn't help. system runs fine after beeping stops


Using the manual for the Gigabyte GA-945P-S3 MB. Go to page 71 & you'll see bios beep codes for your board: AWARD BIOS Beep Codes 1 short: System boots successfully 2 short: CMOS setting error 1 long 1 short: DRAM or M/B error 1 long 2 short: Monitor or display card error 1 long 3 short: Keyboard error 1 long 9 short: BIOS ROM error Continuous long beeps: DRAM error Continuous short beeps: Power error As you can see there isn't a code for three short beeps. When you boot your system try to pause your boot up screen. See if the bios is reporting the correct total of memory in your system. Bios codes from the link below. http://www.computerhope.com/beep.htm#05 3 beeps for the AMI bios code reports Base 64K RAM failure. You can test your memory. Go to memtest.org Scroll down the site to just under the three screen shots. Download Memtest86+ V2.11 You have a choice in making a bootable floppy disk or a bootable CD-ROM disk. Once completed you boot your system to the testing program. Memtest will check your system memory. This should help. Thanks for using FixYa! Mike

Jun 04, 2009 | Gigabyte GA-945P-S3 Motherboard

1 Answer

Boot up beep codes, intel d845glly


here is a list of all beep codes : http://www.cas411.com/ShowArticle.aspx?ID=54
try to identify the beep pattern, it should tell you what's wrong. Most of the time, it's a bad memory stick.

Alex

Feb 22, 2009 | Intel D845GLLY Motherboard

2 Answers

No beep,No Display on my monitor,only CPU heatsink fan is moving


have you thought about changing the battery on the motherboard, also checking that the fan on the cpu is seated properly with enough heatsink paste as both these issues will stop the pc from booting

Oct 29, 2008 | Asrock K7S41GX Motherboard

1 Answer

Pc is not booting and no display in monitor


First, try resetting the CMOS. If it is not working, replace the RAM. Could be a damaged RAM

Sep 11, 2008 | ASUS (P4BGV-MX) Motherboard

Not finding what you are looking for?
ASUS M2N32-SLI Deluxe/Wireless Edition ATX Motherboard (1254095) Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Tony

Level 3 Expert

2598 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Are you an ASUS Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...