Question about Coby MP-610 MP3 Player

2 Answers

My Coby 610 AC MP3 player is showing a white screen when it turns on. My music still plays but it will not show the user interface

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Tengo un mp coby mp610ac y el ingreso videos y no los lee.por favor necesito que me digan cual es el formato que lee mi mp4

Posted on Jun 10, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 820 Answers

Hello,

For Coby MP610 there's a firmware update.
Enter [cobyusa.com] in Internet Explorer to go online for the download.
In the page top where it says [Product Search], enter [MP610] to view the MP610 support page.

See the MP610_firmware_update.zip file:
Right click the zip file and select Save target as... to download the update to a location on your computer.
After the download unzip the file and look in the pdf file, readable with Adobe Reader, how to perform the update.

Posted on Feb 03, 2010

  • YourZEN
    YourZEN Jun 11, 2010

    Hello javac958,

    ( This solution seems to be a help request: here's my answer )

    For Coby MP610 AC the format for the video should be AMV.



    For video conversion and transfers:

    Install and use Coby Media Manager from the CD.

    No CD with Coby Media Manager ? Then download from cobyusa.com in Windows Internet Explorer:

    http://www.cobyusa.com/?p=fix_mp822

    The fix is the Manager, you can also use for the MP610 AC.



    Run Coby Media Manager and setup the MP610 AC as favorite device:

    In page top select Tools > Device Manager...

    Select MP-610 (AC) in the Devices list

    Add >> to put your player in the Favorite list

    OK to save the MP610 AC you want to work with






    Look under Device configuration and tab Output file format to see the extension AMV for this player.

    Now use the Help function how to use Coby Media Manager, for how to convert and transfer videos onto your player.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Coby MP-610 Firmware Download Replacing the firmware of your Coby 610 MP3 Player...


Coby MP-610 Firmware Download

Replacing the firmware of your Coby 610 MP3 Player will unfreeze it and help it act normally again. This will also fix the 'File System Error' that has been popping up with some Coby 610 players. You can find it at the cobyusa.com website by choosing 'Mp3 & Portable', then 'Mp3 & Mp4 Players', then your model 'MP610', from the support page.

Here is the Coby 610 Firmware Direct Link.


da1c744.jpg

Unpacking the zipfile will give you a PDF file with instructions, and a program file to run.

Your music will be erased when you run this firmware update. The instructions suggest that even if your mp3 player won't startup properly, if you plug it into your computer you should be able to access it as a removable disk, and copy all your music to a temporary folder on your computer.

Here are the steps:

  1. Plug your MP610 into your computer.
  2. Copy all your music to a temporary folder.
  3. Disconnect your MP610 from your computer.
  4. Disconnect as many USB devices as possible from your computer (to simplify identifying the MP610 at a later step, and avoid damaging other devices by trying to load the MP610 firmware into them by mistake.)
  5. Run the Firmware Update program 'MP610 T LCD Firmware Update for file sys err.exe'
  6. You will see a screen with up to 24 numbered, empty boxes.
  7. Connect the MP610 to your computer. It will show up in one of the boxes.
  8. Once the MP3 player shows up, click on the Firmware Feature icon to start the firmware upgrade.
  9. After the firmware update is complete, you will receive a checkmark in the firmware box.
  10. Disconnect the MP610.
  11. Close the firmware update software.
  12. Turn on the 610 to confirm it starts up and the display reads 'COBY'.
  13. Plug it back into your computer and copy your music back on to it.
1e93cf1.jpg

283ab15.jpg

I hope that helps.

on Apr 23, 2010 | Coby MP-610 MP3 Player

Tip

COBY MP-610 File System Error


COBY MP-610 Digital Media Player File System Error Solution

3a37e3b.jpg

Replacing the firmware of your Coby 610 MP3 Player will unfreeze it and help it act normally again. This will also fix the 'File System Error' that has been popping up with some Coby 610 players. You can find it at the cobyusa.com website by choosing 'Mp3 & Portable', then 'Mp3 & Mp4 Players', then your model 'MP610', from the support page. Or, here is the direct link to the file from Coby's servers.

c6244cb.jpg

Unpacking the archive from the Coby Website will give you a PDF file with instructions, and a program file to run.

Your music will be erased when you run this firmware update. The instructions suggest that even if your mp3 player won't startup properly, if you plug it into your computer you should be able to access it as a removable disk, and copy all your music to a temporary folder on your computer.

Here are the steps:

  1. Plug your MP610 into your computer.
  2. Copy all your music to a temporary folder.
  3. Disconnect your MP610 from your computer.
  4. Disconnect as many USB devices as possible from your computer (to simplify identifying the MP610 at a later step, and avoid damaging other devices by trying to load the MP610 firmware into them by mistake.)
  5. Run the Firmware Update program 'MP610 T LCD Firmware Update for file sys err.exe'
  6. You will see a screen with up to 24 numbered, empty boxes.
  7. Connect the MP610 to your computer. It will show up in one of the boxes.
  8. Once the MP3 player shows up, click on the Firmware Feature icon to start the firmware upgrade.
  9. After the firmware update is complete, you will receive a checkmark in the firmware box.
  10. Disconnect the MP610.
  11. Close the firmware update software.
  12. Turn on the 610 to confirm it starts up and the display reads 'COBY'.
  13. Plug it back into your computer and copy your music back on to it.
53a6bbb.jpg

ff7c335.jpg


on Mar 29, 2010 | Coby MP-610 MP3 Player

1 Answer

FILE SYSTEM ERR Stay On Screen When I Turn My Coby610-2G On


Here are instructions for a solution to your Coby 610 File System Error problem.

Replacing the firmware of your Coby 610 MP3 Player will unfreeze it and help it act normally again. This will also fix the 'File System Error' that has been popping up with some Coby 610 players. You can find it at the cobyusa.com website by choosing 'Mp3 & Portable', then 'Mp3 & Mp4 Players', then your model 'MP610', from the support page. Or, here is the direct link to the file from Coby's servers.

da1c744.jpg

Unpacking the zipfile from the Coby Website will give you a PDF file with instructions, and a program file to run.

Your music will be erased when you run this firmware update. The instructions suggest that even if your mp3 player won't startup properly, if you plug it into your computer you should be able to access it as a removable disk, and copy all your music to a temporary folder on your computer.

Here are the steps:

  1. Plug your MP610 into your computer.
  2. Copy all your music to a temporary folder.
  3. Disconnect your MP610 from your computer.
  4. Disconnect as many USB devices as possible from your computer (to simplify identifying the MP610 at a later step, and avoid damaging other devices by trying to load the MP610 firmware into them by mistake.)
  5. Run the Firmware Update program 'MP610 T LCD Firmware Update for file sys err.exe'
  6. You will see a screen with up to 24 numbered, empty boxes.
  7. Connect the MP610 to your computer. It will show up in one of the boxes.
  8. Once the MP3 player shows up, click on the Firmware Feature icon to start the firmware upgrade.
  9. After the firmware update is complete, you will receive a checkmark in the firmware box.
  10. Disconnect the MP610.
  11. Close the firmware update software.
  12. Turn on the 610 to confirm it starts up and the display reads 'COBY'.
  13. Plug it back into your computer and copy your music back on to it.
1e93cf1.jpg

283ab15.jpg


You can refer to this Coby 610 solution here.

I hope that helps.

Jan 10, 2010 | Coby MP-610 MP3 Player

Tip

How to UnFreeze your Coby 610 MP3 Player and Fix the 'File System Error'


Replacing the firmware of your Coby 610 MP3 Player will unfreeze it and help it act normally again. This will also fix the 'File System Error' that has been popping up with some Coby 610 players. You can find it at the cobyusa.com website by choosing 'Mp3 & Portable', then 'Mp3 & Mp4 Players', then your model 'MP610', from the support page.

Here is the Coby 610 Firmware Direct Link.


da1c744.jpg

Unpacking the zipfile will give you a PDF file with instructions, and a program file to run.

Your music will be erased when you run this firmware update. The instructions suggest that even if your mp3 player won't startup properly, if you plug it into your computer you should be able to access it as a removable disk, and copy all your music to a temporary folder on your computer.

Here are the steps:

  1. Plug your MP610 into your computer.
  2. Copy all your music to a temporary folder.
  3. Disconnect your MP610 from your computer.
  4. Disconnect as many USB devices as possible from your computer (to simplify identifying the MP610 at a later step, and avoid damaging other devices by trying to load the MP610 firmware into them by mistake.)
  5. Run the Firmware Update program 'MP610 T LCD Firmware Update for file sys err.exe'
  6. You will see a screen with up to 24 numbered, empty boxes.
  7. Connect the MP610 to your computer. It will show up in one of the boxes.
  8. Once the MP3 player shows up, click on the Firmware Feature icon to start the firmware upgrade.
  9. After the firmware update is complete, you will receive a checkmark in the firmware box.
  10. Disconnect the MP610.
  11. Close the firmware update software.
  12. Turn on the 610 to confirm it starts up and the display reads 'COBY'.
  13. Plug it back into your computer and copy your music back on to it.
1e93cf1.jpg

283ab15.jpg

I hope that helps.

on Dec 31, 2009 | Coby MP-610 MP3 Player

1 Answer

My coby mp 610 turned of apparently while i was listening to it but the screen is still bright and it wont do anything now. How do i fix that?


Here are instructions for a solution to your Coby 610 MP3 player acting up.

Replacing the firmware of your Coby 610 MP3 Player will unfreeze it and help it act normally again. This will also fix the 'File System Error' that has been popping up with some Coby 610 players. You can find it at the cobyusa.com website by choosing 'Mp3 & Portable', then 'Mp3 & Mp4 Players', then your model 'MP610', from the support page. Or, here is the direct link to the file from Coby's servers.

da1c744.jpg

Unpacking the zipfile from the Coby Website will give you a PDF file with instructions, and a program file to run.

Your music will be erased when you run this firmware update. The instructions suggest that even if your mp3 player won't startup properly, if you plug it into your computer you should be able to access it as a removable disk, and copy all your music to a temporary folder on your computer.

Here are the steps:

  1. Plug your MP610 into your computer.
  2. Copy all your music to a temporary folder.
  3. Disconnect your MP610 from your computer.
  4. Disconnect as many USB devices as possible from your computer (to simplify identifying the MP610 at a later step, and avoid damaging other devices by trying to load the MP610 firmware into them by mistake.)
  5. Run the Firmware Update program 'MP610 T LCD Firmware Update for file sys err.exe'
  6. You will see a screen with up to 24 numbered, empty boxes.
  7. Connect the MP610 to your computer. It will show up in one of the boxes.
  8. Once the MP3 player shows up, click on the Firmware Feature icon to start the firmware upgrade.
  9. After the firmware update is complete, you will receive a checkmark in the firmware box.
  10. Disconnect the MP610.
  11. Close the firmware update software.
  12. Turn on the 610 to confirm it starts up and the display reads 'COBY'.
  13. Plug it back into your computer and copy your music back on to it.
1e93cf1.jpg

283ab15.jpg


You can refer to this Coby 610 solution here.

I hope that helps.

Jan 03, 2010 | Coby MP-610 MP3 Player

1 Answer

My coby mp 610 wont play all the music i have on it.


I use a different MP3 player, but I noticed that mine wouldn't play .AAC files, only .MP3 files. I upgraded the firmware of mine and then it played everything. I noticed there is a new firmware upgrade for the COBY 610, so that might be of help to you.

You can find it at the cobyusa.com website by choosing 'Mp3 & Portable', then 'Mp3 & Mp4 Players', then your model 'MP610', from the support page. Or, here is the direct link to the file from Coby's servers.

ca041a9.jpg

Unpacking the zipfile from the Coby Website will give you a PDF file with instructions, and a program file to run.

Your music will be erased when you run this firmware update. The instructions suggest that even if your mp3 player won't startup properly, if you plug it into your computer you should be able to access it as a removable disk, and copy all your music to a temporary folder on your computer.

Here are the steps:

  1. Plug your MP610 into your computer.
  2. Copy all your music to a temporary folder.
  3. Disconnect your MP610 from your computer.
  4. Disconnect as many USB devices as possible from your computer (to simplify identifying the MP610 at a later step, and avoid damaging other devices by trying to load the MP610 firmware into them by mistake.)
  5. Run the Firmware Update program 'MP610 T LCD Firmware Update for file sys err.exe'
  6. You will see a screen with up to 24 numbered, empty boxes.
  7. Connect the MP610 to your computer. It will show up in one of the boxes.
  8. Once the MP3 player shows up, click on the Firmware Feature icon to start the firmware upgrade.
  9. After the firmware update is complete, you will receive a checkmark in the Firmware box.
  10. Disconnect the MP610.
  11. Close the firmware update software.
  12. Turn on the 610 to confirm it starts up and the display reads 'COBY'.
  13. Plug it back into your computer and copy your music back on to it.
8bef358.jpg

60dd655.jpg

I hope that helps.

Dec 28, 2009 | Coby MP-610 MP3 Player

1 Answer

Coby MP-610 MP3 Player


You need to use MP3 or WMA files.

Sep 07, 2009 | Coby MP-610 MP3 Player

1 Answer

Coby MP-C756 Firmware upgrade issue


Screen blurs after showing name , when being turned on

Mar 07, 2007 | Coby MP-C941 MP3 Player

Not finding what you are looking for?
Coby MP-610  MP3 Player Logo

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top Coby Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

Gyula Lacz

Level 3 Expert

482 Answers

Cindy Wells

Level 3 Expert

5102 Answers

Are you a Coby Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...