Question about Milan Technologies MiLAN MIL-SM801PSC Networking Switch

1 Answer

I have Cable Modem connected to a Linksys WRT54G, From that I have a MiLAN MIL-SM801P. Do I need a special CAT5 cable between the two? THX.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,017 Answers

Normal patch cord can do or you can connect thru wireless connection make sure you putting correct ip addressa nd dns address in lan card properties.
Have a nice day and do not forget to rate please...!

Posted on Feb 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to connect a Scientific-Atlanta WebSTAR 2000 series Cable Modem to a Linksys Wireless-G WRT54G wireless router but the linksys doesnt detect the modem and the computer wont let the setup program for...


Most Cable Internet Service Providers (ISPs) use Media Access Control (MAC) Address authentication to establish Internet connection for end-users. MAC address is a unique identifier assigned to the network adapter/s of the computer.
To set up your Linksys router to work with a Cable ISP, you have to enable the MAC Clone feature of the router. MAC Cloning is a procedure which enables a router to copy the MAC address of the computer that's registered with the ISP.
To setup a Linksys router with Cable connection you need to perform four steps using the computer that's been registered with the ISP:
i. Verifying Internet Connection
ii. Connecting Devices Together
iii. Checking the Router's LEDs
iv. Configuring a Linksys Router for a Cable Internet Connection


If you need more help come back.Post / thumbs / testimonial are welcome!

Nov 19, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Can connect to internet directly through modem. When connected through Linksys WRT54GS router, all lights are ok on both modem and Linksys--including internet. (Have had this router for 2 years...no...


As last resort you might want to use a JTAG cable and debricking programming software. If your router is brikced or you want to change the firmware this cable can do it. The cable will connect to your parallel port and your wireless router so you can repair your router. They are about $5.95.

Jan 11, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Linksys wrt54g SRX200. I can connect to my router


It appears the connection between the Linksys and the modem is not working.
Try a different LAN cable.
Check the LAN cable from the modem to the Linksys, it should be connected to the WAN/Internet port on the Linksys.

Dec 19, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

My Linksys WRT54G Will Not Work.


It seems that your cabling is wrong. This is what it should look like:
  1. Telephone outlet to cable modem (Via telephone cable)
  2. Cable modem to router (via Ethernet cable)
  3. router via Ethernet cable or wireless to computers
Does your setup look like this? Please let me know if not so we can configure it correctly.

Jul 08, 2009 | Linksys Wireless-G WRT54G Router

2 Answers

Need to connect my old Linksys modem to a new Motorola SBV5121 cable modem.


THE MAIN LINE GOES INTO THE WAN PORT FROM THE MODEM PROVIDED FROM YOUR MOTOROLA .....THEN THE 4 PORTS ARE TO CONNECT THE COMPUTER ....HAVE FUN

Jun 02, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

How to change Linksys wireless router?


When you get cable internet, the cable company provides you with a modem (usually). From the cable modem you can hook up the Linksys router with an ethernet cable and it will work just fine. Hook the router up to the desktop or laptop with another ethernet cable if you need to make changes to the router security or whatever. The router address is generally 192.168.1.1. YOu can type that address right into the internet address and you router page shoud show up. If you have been using the Linksys router with the phone line all you need is to connect it to the cable modem to work. An ethernet cable is like a telephone line with a fatter connecter.

Nov 29, 2008 | Linksys Wireless-G WRT54G Router

2 Answers

Linksys wireless G CD will not install


Router setup
If you are using the cd that comes with the router, that is the problem. You do not have to use the cd. Go to the control panel and un-install the program that the cd installed.
then:
Connect the Cat5 cable from the modem to the WAN port on the router. Then connect a Cat5 cable from any port on the router to your PC's network port.


Shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider. If you have DSL, the router needs to be configured with PPOe.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe





Nov 27, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

Useing WRT54G WITH STARBAND


your starband is if im right the cable modem ? connect the modem to the router and then the router to the computer ? then run the linksys easy connect @ www.linksys.com/support

Jul 19, 2008 | Linksys Wireless-G WRT54G Router

3 Answers

Hookup with Vonage device


I am going to attempt to give you a solution here. But you must understand a few things before I begin.

First, I would like to clarify that if you have Time Warner internet service, you are on Cable Internet. Not DSL. (This makes a world of difference when it comes to using a router.)

Secondly, you did not specify model numbers of your devices. Therefore I am assuming that you are using the following devices:
If this is not the correct equipment, continue to follow the instructions but be dynamic and adapt my instructions to the equipment you have. It should be similar enough that you shouldn't have any problem easily doing this.

This instruction set is going to begin from a point that is assuming that we're installing all of this equipment from the standpoint of a completely new installation. From the ground up.

Let's begin.

----------------------------------------------------------------------------------------------------------
UNPLUG AND POWER DOWN ALL OF YOUR EQUIPMENT INCLUDING THE CABLE MODEM, ROUTER, PC AND VONAGE BOX. Do not power on any of the devices until instructed to do so.
----------------------------------------------------------------------------------------------------------
1.) Connect your cable modem to the cable from the wall.

2.) Find the ethernet port on your cable modem. Connect the blue ethernet (CAT5) cable to the ethernet port.

3.) Plug the other end of the blue ethernet cable into the "Internet" port of the router. (Older routers used to also call this a "WAN" port.) It is the only port that is seperated from the rest of them.

4.) Connect another ethernet cable to port 1 of the router.

5.) Connect the other end of the ethernet cable to the network port of your PC.

6.) Connect yet another ethernet cable to port 2 of the router.

7.) Connect the other end of this ethernet cable to the ethernet port of the Vonage box.

8.) Plug in the power adapter of the cable modem. Wait 1 minute for the cable modem to acquire it's signal and set up the connection to Time Warner.

9.) Plug in the power adapter of the Linksys router. It should only take 15-20 seconds to set itself up. (If you have made any configurations to the router prior to this, I recommend pressing and holding the RESET button for at least 10 seconds to give you a fresh configuration state to start with.)

10.) Plug in the power adapter to the Linksys PAP2 VOIP Phone Adapter.

11.) Power on your PC. You should have an internet connection with it.
----------------------------------------------------------------------------------------------------------

You see... As I read the configuration you described, I don't think that you're using a PAP2 phone adapter. You said that you connected the "vonage device" to both your modem and your PC. This is not possible with the PAP2 adapter as it only has ONE ethernet port.

I am led to believe that you are actually using the Linksys WRTP54G which is essentially the same thing as the WRT54G, but with Vonage support built-in.

If that is the case, then you will not need to use the WRT54G router. Instead, follow the instructions that I gave you assuming that the router and the phone device are combined into one device. (The ports will still be labeled the same.)

Download the installation guide for the WRTP54G from the product page link I just gave you. You'll find the link to the User Guide on the right-side panel. This will make everything clearer for you if you do indeed have that router instead of the PAP2 phone adapter.

If you continue to be confused, please let me know. DO NOT just give me a poor rating without asking more questions. I am here to help you solve your issue. Not have my rating decreased just because someone is too confused or lazy to ask more questions.

I'm happy to help you. :)

Good luck and let me know what the outcome is. (And please be sure to list your exact model numbers in the future!)

Cyryl

Nov 11, 2007 | Linksys Wireless-G Broadband Router

Not finding what you are looking for?
Milan Technologies MiLAN MIL-SM801PSC Networking Switch Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Milan Technologies Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Milan Technologies Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...