Question about Galaxy Radios DX-44V 40-Channels Base CB Radio

1 Answer

Galaxy dx440v no receive??

Hi, ive got it transmitting fine, but sadly it dont receive nothing at all? i simply changed the crystal 11.1141 to transit on 26mhz, and thats fine. Can ayone tell me how and where to locate the receive please? cheer thanks

Posted by on

  • Jim Anderson
    Jim Anderson May 11, 2010

    Galaxy's are full of knobs. You've heard that old adage, "The thing don't work!" coupled with the answer, "Is it plugged in?" Doesn't mean we're stupid, just means we often expect the worst. So, have you checked your squelch? -Jeeem-

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 68 Answers

When mixing crystal for different bands, your RX will be affected by the swap as well. I get this every once in a great while, if you want to ship it in I can do the alignments for you here at the shop. dodgem250.com

Posted on Apr 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Galaxy melaka ssb receives but wont transmit whats the fix


look for other fingers that have been in the radio. then back track from there. It could be a switching diode thats burnt.

Jan 27, 2013 | Galaxy Radios DX-959 40-Channels Base CB...

2 Answers

Galaxy dx959 will not receive. Speaker is working. S meter is showing incoming signal.


the over power doides may be blown. you should start there .they should be marked D-1 and D-2. you may want to replace them with diodes of a higher rating.

Jun 26, 2012 | Galaxy Radios DX 959 SSB CB Radio

1 Answer

Galaxy DX 98VHP meter stopped moving . There is no swr reading, nothing. Even with a seperatye meter atached or a dummy load, the meter on the galxy is not working. Did I lose all power?


You appear to be aware of you antenna system with the separate meter attached so the tells me you dont punish a radio with an high swr. I am just guessing red wire/solder in mic cord at plug given that it is a side mic mic jack.
Stock mic
1- Shield (Ground)
2- Yellow (Audio)
3- Red (Transmit)
4- White (Receive)

Jul 02, 2011 | Galaxy Radios DX-959 40-Channels Base CB...

1 Answer

My galaxy 959 sqeals and does not receive or


mike has wiring problems. Check for breaks in cord and where the plug goes into the unit. If not original mike then has incorrect wiring for the radio and will need to be changed for config

May 01, 2010 | Galaxy Radios DX-959 40-Channels Base CB...

2 Answers

Galaxy 99v off Frequency


it is either a bad soilder on your crystal or your crystal is going bad

Dec 15, 2009 | Galaxy Radios DX-99V 40-Channels Base CB...

2 Answers

Galaxy Pluto frequency drifting


Find the crystals in the radio...hope you know what they look like...when you locate them touch one at a time to see if it will stop if it does you have a bad soilder joint on one of the legs or it could be that its time for a new crystal..they don't like the cold weather at all...but it is fixable so don't worry

Nov 27, 2009 | Radio Communications

1 Answer

North Star Dx440v


Hi and welcome to FixYa,

Enabling the 25.165MHz - 28.755MHz range of the radio would require modifications. Depending on the version of the DX440V, here or here. Incidentally, the Channel Chart is here.

Good luck and thank you for asking FixYa.

Nov 10, 2009 | Galaxy Radios DX-44V 40-Channels Base CB...

1 Answer

Radio lights up, but no TX/RX.


Hi and welcome to FixYa,

Based on your description, a possible drift in the local oscillator.  Check the 10.24Mhz crystal filter and its local oscillator for output and consistency.

Good luck and thank you for asking FixYa.

Aug 24, 2009 | Cobra Radio Communications

Not finding what you are looking for?
Galaxy Radios DX-44V 40-Channels Base CB Radio Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Galaxy Radios Radio Communications Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Brad Brown

Level 3 Expert

15557 Answers

Steve
Steve

Level 3 Expert

693 Answers

Are you a Galaxy Radios Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...