Question about Aquacal HEAT PUMP 120,000 BTU H135 -

1 Answer

One of the pool pipes broke and the water froze in the heat pump & there is a crack in the pipe to the heat pump and the casing of the heating element. Does the whole heating element have to be replaced or just the casing?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 366 Answers

You should just have to replace the casing.

Posted on Feb 03, 2010

  • jluciano14 Aug 03, 2011

    I have the same problem with my aquacal and the warranty will not cover this part. So after 3 years it will cost me 1400.00 to fix it.

  • jluciano14 Aug 03, 2011

    I have the same problem with my aquacal and the warranty will not cover this part. So after 3 years it will cost me 1400.00 to fix it.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have hot/cold water pipes coming outside from roofspace in house to garage for washer/dryer. Already had two bursts inside garage and machine and electrics destroyed. New machine installed after...


Insulation only slows down the transfer of heat (cold), it does not stop it. If it is below freezing and the water in any pipe is not moving, it will eventually freeze. Most major industrial supply houses like McMaster-Carr or Grainger in the US, carry pipe tracing tape. It comes in various lengths and you secure it to the pipe under the insulation, plug it in and many types have integral thermostats that keep the pipe above freezing. If you have a washing machine, you will have to consider the lines to the washer valves, both hot & cold and any other areas in the washer that may hold water like the pump and the discharge hoses.
Was this washer always outdoors?

Jan 08, 2011 | Easy Heat Water Pipe Heating Cable

1 Answer

When you switch the 155xl heat pump on the digital thermometer goes up to 96 degrees and shuts down but the incoming water is 79 degrees.


It sounds like you have a by-pass valve that is open. It should be closed down. You will find this on the pipes in and out of the heat pump. The valve will be between these pipes. When you close it you will force water through the heat pump so it can warm then go back to the pool. Now your water is getting warm then just sitting in the heater. When you close the valve you start the water flowing and their by heating.

Dec 11, 2010 | Aquacal HEAT WAVE H155 132,000 BTU -

1 Answer

Hi there,any advice please on frozen pipes..no water at all,no toilet,shower..can i use my central heating?...im forozen..


You will need to get to the pipes with a torch or heat gun and melt the ice out allot of times when the pipes thaw out you may have busted pipes with long cracks running down the pipe. The best way to handle this is to turn off the water to your house and inspect the pipes I would go and purchase some heat tape and cover all the pipes in exposed areas (crawl space, attic, and basement) and let the heat tape thaw out the pipes. after about an hour turn off all your inside valves ( tubes, shower, sinks and the cold water to the water heater) then turn your water back on and watch the meter at the street if it spins then you may have busted pipes.

1- Turn off water at the meter by the street.
2- Thaw out pipes with torch or use the heat tape.
3- Close all valves in house including cold water valve at the water heater.
4- Turn water back on at meter and mark on the meter where the hand is now then watch to see if the meter is turning.


The heat tape will keep you from freezing pipes in the future.


Hope this helps..............

Dec 07, 2010 | Heating & Cooling

1 Answer

I have just bought a new pump for my solar heating, and i change over the pumps attached all the pipes and turned on the pump and nothing is working, there is no water flowing through it, and not even any...


Centrifugal pumps require priming with water before they will pump anything. Loosen one of the pipes and pour in as much water as will stay. Hope this helps!

Nov 22, 2010 | Garden

1 Answer

Losing water in skimmer suctionline what is best way to stop this, without having to dig pipe up?


check for cracks in plastic then repair with plumbers putty if no cracks probably cracked pipe

Jun 20, 2010 | Sta Rite Swimming Pool Pump Seal Ps100...

1 Answer

Central heating circulating pump


The vent pipe should be in front of the pump so that the pump pushes towards the vent pipe NOT sucks from it. I hope this vent pipe is part of the heating system and not of the hot water
Pumps like to push not pull and therefore it is better if the pump is located further down - say at the bottom of the cylinder or lower.
With an indirect cylinder, the hot water & heating are separate circuits and are not and must not be interconnected. You will need a separate pump for the hot water which should be taken from the hot pipe coming out of the cylinder. You may get vacuation in the cylinder - then you will need an Essex or similar valve to replace the hot water outlet connection
By the way - The pressure at any hot tap is directly related to the height difference between the tap and the header tank in the loft [thus a shower downstairs feels stronger than one upstairs]
rod_davies@hotmail.com



Sep 03, 2009 | Grundfos RCP-96 Recirculation Pump for...

1 Answer

Pool heater leakage


Chances are that the header or manifold is cracked. usually the heat exchanger themselves are not damaged from freeze, but either the rear manifold (header) or the front header (the one that pipes go in and out of). Sometimes both. Replacing the entire heater is not necessary, about $200 in parts usually. We have a schematic diagram of the LJ heater here: http://www.poolcenter.com/parts_heaters_lite2_lj_2003-present_pg1.htm

Rob Cox
POOLCENTER.com

Jan 23, 2009 | Jandy Digital Lite2 Lj325 Btu Heater,...

Not finding what you are looking for?
Aquacal HEAT PUMP 120,000 BTU H135 - Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aquacal Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1338 Answers

Bill Jordan

Level 2 Expert

372 Answers

David Spradling
David Spradling

Level 3 Expert

4262 Answers

Are you an Aquacal Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...