Question about KitchenAid KSM150PS Artisan Series Stand Mixer

1 Answer

Detaching bread hook from machine

How? I've misplaced my manual and can't figure out how to detach the blade.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 148 Answers

Im sorry if this doesn't help (if it does please rate :D), but my mother used to have an older one and the way hers came off was by holding the dough hook tightly while pushing it straight up(wich in turn is pushing the dough hook into the machine head itself) while pushing the hook up give it a ( I believe clockwise) turn and let it slide off, don't drop it lol.

Hope this helped you!

Ps there is the lever on the side that once slid, releases the 'head' of the mixer, so you can tilt it back first, this should make it easies even.

Posted on Feb 03, 2010

Testimonial: "Thanks for you assistance. There appears to be something else wrong with the shaft, but I appreciated the rapid response to my frantic question."

  • roadtrippin Feb 03, 2010

    Sorry it didn't help you....I did look some more into it and it seems those models ARE NOT recommended to make dough (!)..( I know, it comes with a doughhook).They seem to have a plastic gear built in as protection for overloading (prob). When the machine counters to much resistance that gear will strip its teeth causing the machine to not be able to turn. I hope your problem is not a severe, but if yuor mixer is "locked up" then at least you found the problem.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why wont my food processor work?


[PDF]Food Processor - Cuisinart

https://www.cuisinart.com/share/pdf/manuals/dlc-xp.pdf

CuisinartDough blade, metal chopping blade, 3 slicing discs, shredding disc, detachable stem... food processing technology plus the largest work bowl on the consumer ...

[PDF]Download Manual - Cuisinart

https://www.cuisinart.com/share/pdf/manuals/dlc-10s.pdf

Cuisinartwork bowl, cover and pusher ... The work bowl won't come off until the ..... DOUGH.BLADE. 12. The Pro Classic1" Food Processor can mix and knead dough in a.

[PDF]INSTRUCTION BOOKLET - Cuisinart

https://www.cuisinart.com/share/pdf/manuals/fp-12dc.pdf Cuisinart12-Cup Cuisinart Elite Collection® 2.0 Food Processor FP-12N Series. For your ...RECOMMENDED MAXIMUM WORK BOWL CAPACITIES ... dough blade, adjustable slicing disc, reversible ...... immediately after use so food won't dry on them ...

[PDF]Premier Series 7-Cup Food Processor DLC-2007N - Cui


Jan 01, 2016 | Cuisinart Dough Blade Plastic for DLC-2014...

2 Answers

Need replacement beaters for Rival 12 speed stand mixer. I am unable to find any 89-attachments for this mixer as I have misplaced the beaters that came with the unit. I've looked everywhere. Are...


I cant find any information online at all about buying attachments for my new Rival 12 Speed Blender!! Does anyone know how I would find out how I could go about ordering new parts for it?

Jul 01, 2011 | Rival Food Mixers

1 Answer

I cannot remove the flat mixing blade, after mixing cake. It has never happened before, just doesn't move up down or sideways! it seems completely locked.


The blade sounds like it's jammed somehow perhaps simply with some food matter.
Ensure the mixer is not plugged in then try removing the bowl, locking the mixer in the down position and pushing up hard on the blade to try and dislodge it. If it comes free and lifts up then try wiggling and rotating it normally off the mount.
Sometimes with use the attachments can become slightly warped requiring more force to lift them before rotating off the mount.
I once used my own Kitchen Aid mixer with the dough hook attachment to make a whole wheat bread dough. When I was done the hook was a bit bent from the hearty dough. There was also some flour in the mount causing it to jam. Removing the hook attachment proved difficult but not imposable.
Good luck.

Apr 18, 2011 | KitchenAid Food Mixers

1 Answer

This is missing the manual and the hook for kneeding bread. I would like to download a manual. Is there a part number for the kneeding hook?


Need your exact model number from the bottom and back of your stand mixer. You can enter the model number on this webpage to find out if the manufacturer has made a manual available on-line.

If there is no result contact customer support at 1-866-698-2538.

If this was a new purchase that should have contained the manual and hook I would encourage you to contact customer service or return to the vendor for replacement.

For available mixer attachments click on Stand Mixer Attachments & Categories here. (bottom left)

Jan 29, 2011 | KitchenAid KSM 500 325 Watts Stand Mixer

1 Answer

Ordering Rival Mixer parts


I called a phone number that was listed on a web site...

Oct 22, 2009 | Rival 100 Watts MX455-W Hand Mixer

1 Answer

Is 300 w mixer powerful enough to mix bread dough?


Your mixer is easily able to handle the kneading of bread dough. Please advise:

9 cups of all purpose white flour, maximum.

6 cups of specialty flour, maximum. This is any flour besides all purpose white.

Bread doughs are only to be needed on speed 2, and never for longer than 7 minutes.

This is all stated in the Use and Care guide for the mixer itself. If these guidelines are not followed, it may lead to a product failure.

Jul 02, 2009 | KitchenAid KSM90 Ultra Power Series Stand...

1 Answer

Used the bread kneading hook, after 10 minutes, smoking


The mixer motor has probably overheated, as proper use and care was not being followed with the stand mixer.

Bread doughs are recommended to be mixed on speed 2 only and never for longer than 7 minutes. With the resistance of a bread dough that is provided against the beater, mixing for over 7 minutes may overheat mixer and cause smoking.

Please consult your use and care guide to refresh your memory about how to properly use your mixer for making bread doughs.

Jun 07, 2009 | KitchenAid K45SS Classic Stand Mixer

1 Answer

The gear is slipping on my Hobart A200


In what speed is it slipping?You only use 1st speed for dough,right?Can you put it in gear and stop the hook from moving with your hand?Let me know.

Jan 13, 2009 | Hobart N50 Stand Mixer

2 Answers

Bread dough


IT NEEDS TO PROOF LONGER

Dec 10, 2008 | Hobart N50 Stand Mixer

1 Answer

HELP!!


The instructions advise to not run above speed 2 with the dough hook, making bread. This might be what caused it to be destroyed.

Mar 22, 2008 | KitchenAid K45SS Classic Stand Mixer

Not finding what you are looking for?
KitchenAid KSM150PS Artisan Series Stand Mixer Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Mixers Experts

Appliance engineer

Level 2 Expert

87 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a KitchenAid Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...