Question about Car APS687A Remote Start and Keyless Entry System

1 Answer

Remote start not working

Battery was disconnected from the vehicle for about 2 weeks and now the remote start wont work. It goes through the cycles but wont innitiate the turning over process unless you put the key into the ignition. You dont have to turn the key or anything like that, just having the key placed into the ignition and then the system will work like it is suppose to. I dont know if it has something to do with programing the security system to acknowledge the extra key or what. Please let me know

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 288 Answers

It does have to be reprogram to the key look for the manual in the car or go to there site and request manual for that model and then look up reprogrm with key in ignition reprograming.

Posted on Feb 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuse box on my '99 Durango SLT 5.2?


. most likely you need to change the remote battery. It's responcable for many things working correctly. my daughters car locked on her and the alarm sounded and had to disconnect battery in her car to get alarm to stop. when a theft is in process the vehicle takes over and don't allow it to crank and the radio also stops working along with other things. so try battery first in remote.

May 02, 2014 | 1999 Dodge Durango

1 Answer

Indicator light is stuck on, wont work


have you tried syncing the remote with the system again? i think after the remote loses power for so long it isn't synced any longer

Nov 13, 2012 | 5701 VIPER 5701 2-WAY ALARM w/REMOTE START

1 Answer

Remote starter was tried. Car did not start. Now there is clicking under the dash and car won't start with key, locks wont work, etc. remote starter is now disconnected and still the clicking and won't...


The are several things that may be causing this: Low battery Loose negative or positive connection on the battery. Fuse or wire for your remote start is burnt or faulty.
Look for loose connections first, then the fuse and wire for the remote start (it should be the wire with the inline fuse). If these other 2 are good, then try to boost the vehicle and see if it starts. If it does, you have either something draining your battery (light on, bad alternator or connection, or a bad wire) and you should find the problem (if there is one) sooner rather than later so you don't get stranded somewhere.

Mar 03, 2011 | Honda Civic Cars & Trucks

2 Answers

Viper Remote Start wont work properly


if it cranks and wont start then its probably the bypass the module thats not working correctly

May 28, 2010 | Remote Start System

4 Answers

My Viper 791xv remote isn't receiving the page information from the unit in the car. When I press the unlock, lock, or remote start button, it works, but then the remote beeps as if it didn't work (3 sets...


My battery ran low and I jump started my car which some how caused the problem. My viper technician made me a buy new remote but the problem continued even with the new remote.
Try disconnecting the battery of your car for ten minutes and then reconnecting it. It worked for me. Now i have a extra remote which i don't need.

Oct 12, 2009 | 791XV The 791XV is a 2-way Security and...

1 Answer

Remote stops working and then in a few weeks starts up again.


if its a factory remote you have to check your deal if the vehicle is doing all those function you may have a bad module on one of those function

Aug 20, 2009 | 2004 Kia Optima

2 Answers

Key remote no working


Sometimes when you cycle the ignition (turn the key from off to start and back to off again) to often in a short period of time (usually 8 times in 10 seconds or so) on accident, the remote access personality module will enter its programming mode by default. This is how the dealership will program in new remotes for your vehicle. However, if it is done unintentionally, and then no new remote is entered into the system (done by simply pressing any key on the remote within the next 20 seconds or so) then any previous remotes programmed into the RAP module are erased. Hence, your remote will no longer work, until and unless it is reprogrammed using the above method.

May 24, 2009 | 1999 GMC Safari

1 Answer

Anti-theft has engaged


sounds like the transmitter in the key head is defective or it lost programming, try these programing steps, if that doesn't do it u need another key made.

Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door
locks will cycle to confirm programming mode.
2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm
programming.

3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to
confirm programming.

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

Apr 19, 2009 | Mercury Mariner Cars & Trucks

1 Answer

Bulldog Deluxe 500, remote not starting the the vehicle


Remove the battery in your remote for 15 sec, then put back in, start your car with your key, wait 15 sec, while the car is running press the * star button 2 times, it should beep , if not try it again, if still nothing post me back and we can go from there

Feb 22, 2009 | DLX 500 Remote Car Starter

Not finding what you are looking for?
Car APS687A Remote Start and Keyless Entry System Logo

Related Topics:

396 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audiovox Vehicle Parts & Accessories Experts

xxxxxx xxx

Level 3 Expert

4836 Answers

The Knight
The Knight

Level 3 Expert

73691 Answers

Glen Weitzdoerfer

Level 2 Expert

101 Answers

Are you an Audiovox Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...