Flashing ce why would it be flashing ce and what can I do to fix it?

you will find same issue here and how they sorted problem..
(quote.., its a fault in the control panel and all he did to fix it was unplug it from the pcb board ( its the third plug starting from the left ) and it reset itself.
Samsung Model DMT800 Blinking CE

try to clear error code

Hello there:
CE Over current error. Cause: Main PWB assembly is out of order, Winding in the stator assembly is short circuited.
further more
If there is any breakdown in communication between the machine controller and the motor controller, CE flashes and the unit beeps once.

Some common causes of CE errors include:

· Conformal coating on serial communications pins between the machine controller and motor controller. After disconnecting power to the unit, try scraping this coating off the pins.

· Check the resistance values between the serial communications pins with the connectors in place. Make sure the harness does not have a bad connection.

· Check the quick disconnect at the motor terminal. The drive motor must be hooked up properly or a CE error will occur.

· Drive motor thermal protector has opened.

·Motor controller is not powered or fuse has opened. Replace motor controller.

Press STOP/CANCEL to clear the display.

1. Make a bootable USB drive using HP Drive Key Boot Utility (via bootdisk.com Method 2)
2. Format the flash disk in the device.
3. Make the flash disk in the device bootable using MBRTool (This is necessary if you installed GRUB on the disk. The MBR needs to be overwritten)
4. From the Win CE installation folder, from drive:\<path to wince installation>\PLATFORM\CEPC\SRC\BOOTLOADER\DOS\BOOTDISKcopy all files and paste it to the flash disk in the device (These files always comes with Win CE installation)
5. Put your build of Win CE - EBOOT.BIN in the flash disk on the device (This will be your custom Win CE image)
6. Remove the USB drive, and boot the device. Your new build of Win CE should boot up.

http://adobe-flash-player.software.informer.com/10.0/
This should work

CE Communications ErrorIf there is any breakdown in communication between the machine controller and the motor controller, CE flashes and the unit beeps once.


Some common causes of CE errors include:

· Conformal coating on serial communications pins between the machine controller and motor controller. After disconnecting power to the unit, try scraping this coating off the pins.

· Check the resistance values between the serial communications pins with the connectors in place. Make sure the harness does not have a bad connection.

· Check the quick disconnect at the motor terminal. The drive motor must be hooked up properly or a CE error will occur.

· Drive motor thermal protector has opened.

·Motor controller is not powered or fuse has opened. Replace motor controller.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Repair Manual

CE Communications Error If there is any breakdown in communication between the machine controller and the motor controller, CE flashes and the unit beeps once.

Some common causes of CE errors include:

· Conformal coating on serial communications pins between the machine controller and motor controller. After disconnecting power to the unit, try scraping this coating off the pins.

· Check the resistance values between the serial communications pins with the connectors in place. Make sure the harness does not have a bad connection.

· Check the quick disconnect at the motor terminal. The drive motor must be hooked up properly or a CE error will occur.

· Drive motor thermal protector has opened.

·Motor controller is not powered or fuse has opened. Replace motor controller.

Press STOP/CANCEL to clear the display.

Hi,
Ireland Chorus Keys 5E01
Key 0= CE 19 2E 87 80 61 74 90
Key 1= 62 FA D9 F3 CE 05 FA 79
Keymaster latest update was at 19.23 1/1/09

Probably best to flash your box with the latest firmware fix to ensure the codes roll...

You can get the latest fixes and codes from the chatterbox.cc toolbar, just download it and it'll install to your browser.

Hope this helps

Chris (ziraffa)

Washer flashing FL. Still has some water in tub. Won't completely drain. Washing not functioning at all.

Jeff