Question about Computers & Internet

1 Answer

Help - my PC is using 4 minutes to start up !!

What can be done to fix the ''problem'' that my PC is using far too long time to start up. I'm using Spyware Doctor, AVAST Professional, Zonealarm and Registry Mechanic, all last versions. I've got an clean PC with no virus infection and no spyware. The HD is 250Gb, about 150Gb free. 4GB DDR3 -RAM. The PC is an new ACER ASpire 3925. I have an suspicion that something is going on on my computer, cause that the (cooling) FAN is ON all the time.
I'm very thankful if any could post me some tips how to manage my problem without formatting the computer.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 50 Answers

Could be a number of things-firstly, check the number of programmes that 'startup' with your computer & disable any you don't need. Also, could be a conflict between your various antivirus/antispyware programmes. Try disabling them one-by-one (apart from Avast) and see if that helps. Choose 1 good antivirus/2 antimalware/1 firewall. You can check how many of those are running by going into Security centre if you run windows. If your fan keeps running check incase there are any updated drivers for it. Hope this helps!

Posted on Feb 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set time on timex 1440 sports watch


Welcome to FixYa!
Here's your request.
TIME AND DATE 1. Press and hold MODE until HOURS digits flash (you'll be in Alarm Mode) Press MODE again to enter TIME mode, SECONDS digits will flash. 2. Press ADJUST to set SECONDS to zero. 3. Press START/STOP to select MINUTES. 4. Press ADJUST to change. 5. Repeat to set HOURS, MONTH, DAYS, and DAY of WEEK. Go through 12 hours to set AM or PM. 6. Press MODE when done. 7. To display DATE from Time display , press START/STOP. 8. With DATE displayed press and hold START/STOP, then press ADJUST to change display between DATE-MONTH and MONTH-DATE. 9. With TIME displayed, press and hold ADJUST, then press MODE to switch between 12-and 24-hour format.
ALARM AND HOURLY CHIME 1. Press and hold MODE until HOURS digits, DAY, and A or P (for AM or PM) flash. 2. Press ADJUST to change HOURS digits. Go through 12 hours for AM or PM. 3. Press START/STOP to select MINUTES. 4. Press ADJUST to change.. Press MODE when done. 5. Press and hold ADJUST, then press START/STOP to turn chime on/off. Press START/STOP again to turn alarm on /off. Release START/STOP when done.
CHRONOGRAPH 1. Chronograph will count up to 24 hours. Lap times are not stored. After 40 minutes chrono display changes from seconds to minutes. 2. With time displayed, press MODE to select Chrono Mode. 3. Press START/STOP to start. 4. Press ADJUST to view lap time. Press again to sesume lap timing. 5. Press START/STOP to stop timing . Press ADJUST to reset chrono to zero. 6. Repeat for successive laps.
Thank you for using FixYa! Have a great day.
Jas247

May 06, 2011 | Timex Watches

3 Answers

Unable to set clock on pioneer super tuner IIID - tried holding down clock button but time doesn't flash. Your assistance will be appreciated thank you


To set up the clock...
Turn radio off.
Hide clock face.
Press and hold a few seconds “clock button” to bring clock face up.
Press and hold “power on button” till clock starts to blink.
The 4 buttons in a cluster on the right under audio, move the hours and minutes.
press power when done.

I hope this helps
Please rate accordingly
Thank you
Computerrep

Apr 27, 2008 | Car Audio & Video

1 Answer

My telescope-Meade LX200GPS when tracking the star,it can catch it in some minutes ,but later the star out of eyepiece,is it not tracking the goal? when I tracking the jupiter,the telescope can find the...


To track the scope must:

1. Have a Calibrate motors done

2. Be well Trained using the training routine

3. Must have the correct TIME, DATE, and SITE, and Daylight Savings Time

4. Must be properly aligned on two stars.

Have you done all of the setup procedures listed in the manual? Locate a local Astronomy club and the members will help you with your telescope.

Nov 13, 2010 | Meade LX200GPS Telescope

1 Answer

My archos 605 has got recovery code 102 and i cant get it to conect to my pc to fix it can u halp


I fixed my son's 605 4 GB had Recovery code (104) on it. This might work for other error codes too. These are the steps i followed 
* Use the computer for this process that you always used for this archos Archos should be plugged in toPc before starting the process.
* Download the firware Upgrade 2.1
* Plug the Archos to Pc 
* When the white option screen comes up pick the format disk
* Wait until all done do not pick any option on archos after format is done Pc should recognize your archos in 5 seconds 

* Put the firmware in root section of the archos not in any folder.
* Safely remove the usb for Archos from your pc first and then unplug the cable.
* Do not pick any option on the Archos screen
* Just turn it off from the power button by holding it until it turns off
* Wait about 5 minutes and plug it back to pc 
* it will come up with white screen again but this time it will start Update you will see the progress bar moving, wait until it is all done, it will shut off. Turn it back on and  your archos will be back to normal

Mar 19, 2009 | Archos 605 WiFi Digital Media Player

2 Answers

After formatting the archos5 ,the device doesnt get recognised


I fixed my son's 605 4 GB had Recovery code (104) on it. This might work for other error codes too. These are the steps i followed 
* Use the computer for this process that you always used for this archos Archos should be plugged in toPc before starting the process.
* Download the firware Upgrade 2.1
* Plug the Archos to Pc 
* When the white option screen comes up, just pick the format disk
* Wait until all done do not pick any option on archos after format is done Pc should recognize your archos in 5 seconds 

* Put the firmware in root section of the archos not in any folder.
* Safely remove the usb for Archos from your pc first and then unplug the cable.
* Do not pick any option on the Archos screen
* Just turn it off from the power button by holding it until it turns off
* Wait about 5 minutes and plug it back to pc 
* it will come up with white screen again but this time it will start Update you will see the progress bar moving, wait until it is all done, it will shut off. Turn it back on and  your archos will be back to normal

Mar 16, 2009 | Archos 605 WiFi Digital Media Player

1 Answer

Getting a white screen with 102 error message


I fixed my son's 605 4 GB had Recovery code (104) on it. This might work for other error codes too. These are the steps i followed 
* Use the computer for this process that you always used for this archos Archos should be plugged in toPc before starting the process.
* Download the firware Upgrade 2.1
* Plug the Archos to Pc 
* When the white option screen comes up pick the format disk
* Wait until all done do not pick any option on archos after format is done Pc should recognize your archos in 5 seconds 

* Put the firmware in root section of the archos not in any folder.
* Safely remove the usb for Archos from your pc first and then unplug the cable.
* Do not pick any option on the Archos screen
* Just turn it off from the power button by holding it until it turns off
* Wait about 5 minutes and plug it back to pc 
* it will come up with white screen again but this time it will start Update you will see the progress bar moving, wait until it is all done, it will shut off. Turn it back on and  your archos will be back to normal

Mar 13, 2009 | Archos 605 WiFi Digital Media Player

2 Answers

Need instructions for Timex 1440 Sport watch


TIME AND DATE
1. Press and hold MODE until HOURS digits flash (you'll be in Alarm Mode) Press MODE again to enter TIME mode, SECONDS digits will flash.
2. Press ADJUST to set SECONDS to zero.
3. Press START/STOP to select MINUTES.
4. Press ADJUST to change.
5. Repeat to set HOURS, MONTH, DAYS, and DAY of WEEK. Go through 12 hours to set AM or PM.
6. Press MODE when done.
7. To display DATE from Time display , press START/STOP.
8. With DATE displayed press and hold START/STOP, then press ADJUST to change display between DATE-MONTH and MONTH-DATE.
9. With TIME displayed, press and hold ADJUST, then press MODE to switch between 12-and 24-hour format.

ALARM AND HOURLY CHIME
1. Press and hold MODE until HOURS digits, DAY, and A or P (for AM or PM) flash.
2. Press ADJUST to change HOURS digits. Go through 12 hours for AM or PM.
3. Press START/STOP to select MINUTES.
4. Press ADJUST to change.. Press MODE when done.
5. Press and hold ADJUST, then press START/STOP to turn chime on/off. Press START/STOP again to turn alarm on /off. Release START/STOP when done.

CHRONOGRAPH
1. Chronograph will count up to 24 hours. Lap times are not stored. After 40 minutes chrono display changes from seconds to minutes.
2. With time displayed, press MODE to select Chrono Mode.
3. Press START/STOP to start.
4. Press ADJUST to view lap time. Press again to sesume lap timing.
5. Press START/STOP to stop timing . Press ADJUST to reset chrono to zero.
6. Repeat for successive laps.

Nov 22, 2008 | Timex 1440 Nylon watch

1 Answer

Car keeps shutting off


has anyone told you it might be the coil i think you have more than one on this car.i know you have spent a lot of money usually coils are the problem at least try that.is this a v6?let me know.

Jul 10, 2008 | 2000 Cadillac Catera

10 Answers

Timex 1440 sports WR50M


Solution #2 by Guest, posted on May 13, 2008 solved my problem. OUTSTANDING solution #2!

1. Hold in the MODE button until the alarm time appears.

2. VERY IMPORTANT - release and TAP the MODE button AGAIN, and the time should appear with the seconds flashing.

3. Use StART/Stop to choose among seconds, hours, and minutes, and

4. Use ADJUST to increase the selected number

5. Press MODE to put the thing back in regular operational mode.

After several attempts with other directions over the last four months, these 5 steps WORKED.

Mar 30, 2008 | Timex 1440 Nylon watch

1 Answer

**** wireless system


try to re install your window vista cd

Mar 21, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...