Question about Precor 9.21 Treadmill

1 Answer

Treadmill get stop with a jrk whn power gets a cut..

Treadmill get stop with a jrk whn power cut.. tell me solution of this **** when power get cut.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Precor Master
  • 832 Answers

Sounds like the wax lubrication has finally boiled off the belt the easiest way eliminate this problem is to rewax the deck. You may purchase this @ http://www.gympart.com/ or call them 1-800-496-7278 I would recommend what is call WAX BLAST they come in 3oz or 6oz bottles.
Now the fun part to apply this product you must first get the treadmill and walk on it for about 5min to heat up the deck, then stop the unit with your product go to upper third of the belt lift edge of the belt stick the nozzle between the belt and deck squeeze the bottle approx. amount 1 tbs of wax to the center then get back on the treadmill and walk for 10 min this is to heat up the wax so that belt will act like a wick to absorb wax! This should be done every 3 months or so. Their a catch if this does fix the problem you may be investing in a new belt and possible and new deck. Hope this take of it!!

Posted on Apr 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix treadmills JKEXER vigor 6090 broke down with smoke and fire ?


sounds like motor went bad tripped the breaker ! go to fuse box look for breaker that's not all the way on turn it off then back on that will get your power back on make sure you un plug treadmill

Sep 06, 2014 | Exercise & Fitness

1 Answer

What do I do to get treadmill to cut off automatically?


If you mean stop after a set period of time has elapsed, there is no setting for this. You could get a timer to plug the treadmill into and do it that way.

Aug 25, 2014 | Horizon Fitness Horizon T101 9 Program...

1 Answer

How to turn on a HS sprint 5050B


I am sure turning a treadmill ON is as simple as A, B, C. If you can't find a switch to start a treadmill, look at the magnetic cut-out button. Most treadmills have a cut-out button that had a string that you attach to your clothing, so just in case you fall off, the treadmill will stops instantly. I would never dare use my treadmill without this magnetic cut-out switch. Falling off and landing on a high speed treadmill can cause serious injuries and skin gashing. And if you can't get off on time while you're being rolled over as you fall it would make stopping the treadmill difficult. Always face the treadmill towards a wall, so if you fall and land on the floor belt, you will be tossed away from the machine. But if you face the treadmill towards the room and the back is towards the wall, if you fall you will not escape the roll-over and will be caught on the floor belt rolling and rolling again until your body has a clearance between the treadmill and the wall. Never play games just for the fun of it or to show your friends, cause treadmills can kill with a blow in the head from a fall.

Jun 30, 2014 | Exercise & Fitness

1 Answer

Hi,mr expert i have a problem with my tv monitor on the treadmill,that suddenly the monitor don't get power,i checked the wire connection,everything is okay.Do you think the problem comes from the monitor...


hi i have had a same problem, but when the monitor on my treadmill stopped i followed the wireing to the control panal and found that a fuse had blown. it tock me a long time but was worth it, now i have cut the main power wire connecting to the monitor and put in my own fuse kit with a higher volt. you can get these cheap from maplins. and if your cant find any fuses etc then i would take the monitor off and take it to any car audio shop and they will test if. hope i have helped

Nov 11, 2010 | Exercise & Fitness

1 Answer

I can not get the treadmill to unfold. Please help


Is this new out of the box/ or used and just purchased? either way, you normally have a pin on the side that should pull back in spring compression to reloease the running board, be holding it wiell whn you pull the pin or your risk damage to the running board, if it's new there will be some strappping holding it up.

Aug 29, 2010 | Proform 490 C Treadmill

1 Answer

I have a hotpoint aquarius WF32O and when i put


is it spinning and craccleking,,carbons faulty in motor ;;will work on spin but not lower voltage wash?
change carbons,, use genuines,only

Jun 21, 2010 | Washing Machines

2 Answers

My Tunturi T20 treadmill stops and cuts the power. This happens when it is stopped with the emergency switch. Then when I try to turn it on again it shows KM 579 and then nothing..no power no screen...


We have the EXACT same problem! Would love to hear a solution to this. It will eventually work again but we have no idea what brings it back to life. I've tried the reset button, unplugging and replugging numerous times and still get the KM and 579 showing up and then no power.

Feb 26, 2010 | Tunturi T20 Folding Programmable Treadmill

1 Answer

I have a Pro Fitness treadmill that keeps stopping sudenly why?


How long have you had the treadmill for? Normally, a treadmill cutting out is due to the motor overheating, depending on how long it takes to cut out. Let me know the details of the fault and I may be able to help.

Jan 05, 2010 | Exercise & Fitness

4 Answers

Lifefitness 9100hr treadmill cut out


iv had similar problems, only happened once tho - i switched it on after a few mins it would go off.

iv read to dismantle the stop switch, clean and replace the microswitch. where can the microswitch be found from?

also, is the red stop switch that needs looking at? how can i remove it?

i was wondering on how i can service/maintain this properly, can anyone advise my on how to give this a service.

Jul 14, 2009 | Life Fitness 9100 Next Generation...

1 Answer

The oven stops working


if your light also cuts out intermittenly sounds like a loose connection, when heated moves and loses contact, def check wiring

Mar 01, 2008 | Electrolux EOB5630 Ultrafan Electric...

Not finding what you are looking for?
Precor 9.21 Treadmill Logo

Related Topics:

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Precor Exercise & Fitness Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Howard
Howard

Level 2 Expert

115 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a Precor Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...