Question about NorStar M7310 Phone

1 Answer

NORSTAR M7310 Needs to swap primary line

I have a NORSTAR M7310 and have multiple phone lines coming into our office. These phone are only capable of being programmed with a few lines. All I want to know how to do is swap one line for another on a phone. I know the 3 digit line code for the line I want to have replaced. I just don't know how to program the 3 digit code into the "Line 2" softkey.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 153 Answers

To find the programming codes for your phone, click on this link.
http://tiny.cc/U3cIt

If this doesn't help you can
Call a Norstar Service Technician
800-527-4663




Posted on Feb 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CANT GET CALLER ID TO WORK ON NORSTAR M7310 PHONE IS IT CAPABLE


This feature requires a class trunk card in the phone system to pass Caller ID.

Jan 17, 2013 | NorStar M7310 Corded Phone

1 Answer

Caller ID not working on Norstar terminal using line dedicated to fax and phone


You must have latest software to have Caller ID
You must have a Caller ID line card
Caller ID must be programmed on the phone to allow it
Caller ID signal from carrier is sent between 1st and 2nd call

FYI on the fax: Analog ports (ATA's) on the Norstar system do not show Caller ID, instead you would need to use a line share device that supports caller id such as the STICK.

Oct 25, 2012 | NorStar M7310 Corded Phone

1 Answer

How do I stop all phones ringing when a specific line rings with a Norstar M7310


Normally tech side programming
If you do not know how to program, navigate or the password call a tech.
otherwise go to Sets/Ext#/Line Access/Line Assignment, enter line # in question, press Change until you see the option you want ie.e appear only or not assigned.

Oct 20, 2012 | NorStar Meridian M7310 Phone

1 Answer

Incoming calls on Line 4 are ringing in personal office and mail line. I want it only to ring on Mail line . Our phone is a Norstar M7310. Thanks Sherrie



Enter Feature **2663444
Search through General Options until you find Ringing options.
Type in the extension number of your personal office.
scroll to line 4 choose turn ringer to off, and rls! Let me know if you need clarification on how to find Ringers in General Options.

May 20, 2011 | NorStar M7310 Corded Phone

1 Answer

Norstar M7208, it's direct line number is diverting to another ph


It could be a simple as the phone has call forwarding to another extension set up on it or the direct line could also be programmed on the other set. Does the screen on the non- ringing m7208 display "forward to:xxx" or does it display the current day and time?

Jul 01, 2010 | NorStar M7310 Corded Phone

1 Answer

Have Norstar M7310 5 line phone 2 lines say they


You need to unplug something, just not the phone.

The two lines are probably conferenced together. Go find the gray Nortel cabinet and pull the plug on it.

Carl

Oct 30, 2009 | NorStar Meridian M7310 Phone

1 Answer

Call forwarding for NorStar m7310


You have to know how to get into programming, and it depends on the type of telephone lines you have... if you have regular analog lines, on a out bound call transfer there is going to be line degragation. Meaning that the outgoing call is not going to be of the best quality.

Secondly, you have to see how many telephone lines you have, if you have 3 analog trunks, with a call forwarding to a cell phone, you will be using up 2 lines... 1 incoming and 1 outgoing to your cell. This leaves 1 trunk for incoming or outgoing callers.

Jan 22, 2009 | NorStar M7310 Phone

1 Answer

Our office has 13 phones all the same. Some of the phones do not ring. I would like to get one of the phones to ring. It is a Norstar Meridian M7310


You will have to go into system programming, under sets, line appearances. You will need to set the lines on the phones to appear and ring, not just appear.

Dec 08, 2008 | NorStar Meridian M7310 Phone

1 Answer

Programming a phone to pick up calls


I need more information. When calls come in, does the triangles appear on the phones you want to pick up? Do you have all the lines on the phones? Is sounds like you want only the "ringing sound" to happen on your phone, but have it appear on the others. Is this correct??

Dec 14, 2006 | NorStar M7310 Corded Phone

Not finding what you are looking for?
NorStar M7310 Phone Logo

Related Topics:

373 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

kakima

Level 3 Expert

102366 Answers

dan4261

Level 1 Expert

14 Answers

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...